Suspension system in the car

start
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


OBJECTIVES:
After studying Chapter 85, the reader should
be able to:

• Prepare for ASE Suspension and Steering (A4)
•
•

certification test content area “B”
(Suspension System Diagnosis and Repair).
List various types of suspensions and their

component parts.
Explain how coil, leaf, and torsion bar springs
work.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


OBJECTIVES:
After studying Chapter 85, the reader should
be able to:

•
•

Describe how suspension components
function to allow wheel movement up and
down and provide for turning.
Describe how shock absorbers control spring
forces.

Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


KEY TERMS:
air spring • anti-dive • anti-squat
ball joints • bulkhead • bump stop
center bolt • coil springs • composite leaf spring • control

arms • cradle
full frame • gVW • hooke’s law
independent suspension • insulators
kingpin • ladder frame • lateral links
leaf springs • load-carrying ball joint
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

Continued
©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


KEY TERMS:
mono leaf • non-load-carrying ball joint
perimeter frame • platforms • rebound clips
shackles • shock absorbers • space frame • spring pocket
• spring rate • springs • sprung weight • stabilizer bars •

steering knuckles • stress riser • strut rod • struts • stubtype frame
torsion bar
unit-body • unsprung weight
wheel rate
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Street-driven cars and trucks use a suspension system to
keep the tires on the road and to provide acceptable riding
comfort.
A vehicle with a solid suspension, or no suspension, would
bounce off the ground when the tires hit a bump.
If the tires are off the ground, even for a fraction of a second,
loss of control is possible.

Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


FRAME CONSTRUCTION
Frame construction consists of channel-shaped steel beams
welded and/or fastened together. The frame supports all the
“running gear”, including the engine, transmission, rear axle
assembly (if rear-wheel drive), and all suspension components.
Referred to as full frame, it is so complete that most vehicles can
usually be driven without the body. Most trucks and larger rearwheel-drive cars use a full frame.
Ladder Frame A common name for a type of perimeter frame
where the transverse (lateral) connecting members are straight
across is ladder frame. When viewed with the body removed, the

frame resembles a ladder. Most pickup trucks are constructed with
a ladder-type frame. See Figures 85–1 and 85–2
Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Figure 85–1 A typical truck frame is an excellent example of a ladder-type frame. The two side =
members are connected by a crossmember.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008

2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Perimeter Frame
A perimeter frame consists
of welded or riveted frame
members around the entire
perimeter of the body.

Figure 85–2 Rubber cushions used in body or
frame construction isolate noise and vibration
from traveling to the passenger compartment.

This means frame members
provide support underneath
the sides as well as for the
suspension and suspension
components.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Stub-Type Frames
A stub-type frame is a partial
frame often used on unit-body
vehicles to support power train
and suspension components.

(a)

It is also called a cradle on many

front-wheel-drive vehicles.

Figure 85–3 (a) Separate body and frame
construction; (b) unitized construction: the
small frame members are for support of the
engine and suspension components. Many
vehicles attach the suspension components
directly to the reinforced sections of the body
and do not require the rear frame section.

(b)

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458

Unit-Body Construction Unit-body (called unibody) combines
the body with the structure of the frame. The body supports the
engine and drive line components, as well as the suspension and
steering components. The body is composed of many individual
stamped-steel panels welded together.
The strength of this type of construction lies in the shape of the
assembly. The typical vehicle uses 300 separate, different stamped
steel panels that are spot-welded to form a vehicle’s body.
See Figure 85–4.
NOTE: A typical vehicle contains about 10,000 individual parts.
Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458

Figure 85–4 Welded metal sections create a platform that combines the body with the frame
using unit-body construction.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Space Frame Construction Formed sheet steel used to construct a
framework for the entire vehicle is called space frame. The vehicle
is drivable without the body, which uses plastic or steel panels to
cover the steel framework.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


What Does GVM Mean?
GVW, gross vehicle weight is the weight of the vehicle plus the weight of
all passengers the vehicle is designed to carry (150 lb [68 kg] each), plus
the maximum allowable payload or luggage load.
Curb weight is the weight of a vehicle when wet, meaning with a full tank of
fuel and all fluids filled, but without passengers or cargo (luggage). Model
weight is the weight of a vehicle wet and with passengers.
The GVW is found stamped on a plate fastened to the doorjamb of most
vehicles. A high GVW rating does not mean that the vehicle itself weighs a
lot more than other vehicles. For example, a light truck with a GVW of

6,000 lbs (2,700 kg) will not ride like an old 6,000-lb luxury car. In fact, a
high GVW rating usually requires stiff springs to support the payload; these
stiff springs result in a harsh ride.
Often techs are asked to correct a harsh-riding truck that has a high GVW
rating. The tech can only check that everything in the suspension is
satisfactory and then try to convince the owner that a harsher-than-normal
ride is the result of a higher GVW rating.
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


PLATFORMS
The platform of any vehicle is the basic size and shape. Various
vehicles of different makes can share the same platform, and
therefore many of the same drive train (engine, transmission, and

final drive components) and suspension and steering components.
A platform of a unit-body vehicle includes all major sheet-metal
components that form the load-bearing structure of the vehicle,
including the front suspension and engine-supporting sections.
The area separating the engine compartment from the passenger
compartment is called the bulkhead. The height and location of
the bulkhead panel determines the shape of the rest of the vehicle.
Other components of vehicle platform design that affect hand-ling
and ride are the track and wheelbase of the vehicle.
Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Wheelbase of a vehicle is distance between the center of the front

wheel and the center of the rear wheel, as viewed from the side.
A vehicle with a long wheelbase tends to ride smoother than a
vehicle with a short one.

Track of a vehicle is distance between
the wheels, as viewed from the front or rear.
A wide-track vehicle is a vehicle with a wide wheel stance; this
increases the stability of the vehicle, especially when cornering.
Hollander Interchange Manual
Most salvage businesses that deal with wrecked vehicles use a reference book called
the Hollander Interchange Manual. In this yearly publication, every vehicle part is given
a number. If a part from another vehicle has the same Hollander number, then the parts
are interchangeable.
Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458

07458


UNSPRUNG WEIGHT
A suspension system has allow the wheels to move up and down
quickly over bumps and dips without affecting the entire weight of
the car or truck. The lighter the total weight of the components, the
better the handling and ride. This is called unsprung weight.
The idea of very light weight resulted in magnesium wheels for
racing cars, very light yet strong. Aftermarket wheels that
resemble racing wheels are often referred to as mag wheels.
Unsprung weight should be kept as low as possible.
Sprung weight is the term used to identify the weight of the car or
truck that does not move up and down and is supported or sprung
by the suspension.

Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,

River,NJ
NJ07458
07458


TYPES OF SUSPENSIONS
Early suspension systems on
old horse wagons, buggies,
and older vehicles used a solid
axle for front and rear wheels.

Figure 85–6 When one wheel hits a bump or
drops into a hole, both left and right wheels
are moved. Because both wheels are affected,
the ride is often harsh and feels stiff.

Figure 85–5 Solid I-beam axle with leaf springs.

If one wheel hit a bump, the
other wheel was affected, as
shown above.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.

Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Most vehicles today use a separate control-arm-type of suspension
for each front wheel, which allows for movement of one front
wheel without affecting the other front wheel. This type of front
suspension is called independent suspension.
Figure 85–7 A typical independent front suspension used on a rear-wheel-drive vehicle. Each
wheel can hit a bump or hole in the road independently without affecting the opposite wheel.

Continued
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.
Inc.
Pearson
PearsonPrentice

PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458


Springs A suspension spring serves two purposes. It acts as a
buffer between the suspension and frame to absorb vertical wheel
and suspension movement without passing it on to the frame. Each
spring transfers part of the vehicle weight to the suspension
component it rests on, which transfers it to the wheels.
All springs give way to absorb the vertical force of the moving
wheel during jounce, then release that force during rebound as they
return to their original shape and position. Leaf springs flatten, coil
and air springs compress, and torsion bars twist.
Spring Materials Most are made of a tempered steel alloy known
as spring steel, usually chrome silicon or chrome-vanadium alloy.
Tempering is controlled heating and cooling metal to increase the
ability of the metal to return to, or spring back to, its original shape
after being twisted or compressed.
Automotive Technology: Principles, Diagnosis, and Service, 3rd Edition
By James D. Halderman

©©2008
2009Pearson
PearsonEducation,
Education,Inc.

Inc.
Pearson
PearsonPrentice
PrenticeHall
Hall- -Upper
UpperSaddle
SaddleRiver,
River,NJ
NJ07458
07458