Bản vẽ nhà kho (ta)final (1)

MSSV NHÓM 4 TỶ LỆ ĐÓNG GÓP
B2203939 HỌ VÀ TÊN 100%
B2203940 Trương Quốc Huy 100%
B2203941 Lê Thị Thanh Hương 100%
B2203942 Đặng Hoàng Khanh 100%
Trương Hoàng Hạ Long

5 6

600 7 8

1000

250 4 3 12
11
OFFICE 2 9
1 10
15
0 600 100
900
200

1. With top-view, re-draw the floor plan of the warehouse in the tour by

using a 2D sketch.

2. On your sketch, annotate functional areas of the warehouse, including

storage,staging, office, docks, etc.

1. Truck docks

2. Incoming goods area

3. Quality control

4. Wide aisle cantilever rack & four-way forklift

5. Lean-lift

6. Wide aisle & cable drum racking system

7. LKT bins for small parts

8. Narrow aisle racking system

9. Oversized gate

10. Oversized truck dock

11. Outgoing goods area

12. Outgoning goods area including packaging

3. Provide an estimate for the size each functional area as a fraction of

the warehouse’s size.

=> In 2D sketch

4.In each functional area, identify operations that can be observed during

your tour. (Trong mỗi khu vực chức năng, xác định các hoạt động có thể
quan sát được trong suốt chuyến tham quan của bạn.)

1. Truck Docks is the place which park trucks and containers park.
2. Incoming goods area is the place receiving and classifying goods

that suits
3. storage.
4. Quality control is the place checking, controlling and rating the

quality of goods
5. before packaging and bringing them into the market.
6. Wide asile, cantilever rack & four-way forklift is the place for

shelves as well as
7. asile for staff and four-way forklift park.
8. Lean-lift is a verticle storage system using method of operation as

elevator.
9. Wide aisle & Cable drum racking system place cable.
10. KTL bins for small parts, consisting of 32,000 bins.
11. Narrow aisle racking system.
12. Oversized Gate.
13. Oversized Truck Dock.
14. Outgoing goods area export products to trucks and containers.
15. Outgoing goods area including pakaging.

5. How many handling units are there in the warehouse? Provide pictures
of them if possible.

- 32,000 thùng chứa.

- 24500 tấm pallet để hàng hóa.

6. Is there a special storage area, such as Forward-pick or temperature-
controlled, in the warehouse? If there is, highlight it on your sketch.
- Yes, there is.
- The mentioned - above areas will be highlighted by green in the sketch.

7. How many types of containers that have been used in the warehouse
for shipping? Provide pictures of them if possible.
- Container 20 feet

- Covered trailer

8. Have you seen any dunnage or void fill materials during the tour?
Provide the images of them if possible.

9. Is there any cross-docking operation in the warehouse? If there is,
highlight it on your sketch.

- Yes, there is. Those operations are conducted in the following functional areas. (Có
các hoạt động cross-docking diễn ra trong nhà kho. Các hoạt động đó xảy ra ở các bộ
phận).

+ Truck docks
+ Dock door
+ Incoming goods area
+ Quality control
+ Outgoing goods area including pakaging

+ Oversized Gate
+ Oversized Truck Dock
+ Outgoing goods area export products to trucks and containers
The above-mentioned area will be highlighted in green in the sketch.