AutoIT Help part 64 potx

Function Reference
GUICtrlSetResizing
Defines the resizing method used by a control.
GUICtrlSetResizing ( controlID, resizing )
Parameters
controlID
The control identifier (controlID) as returned by a GUICtrlCreate
function.
resizing
See the Docking Values table below for values that can be used (add
together multiple values if required).

Return Value
Success:

Returns 1.
Failure:

Returns 0.

Remarks
When a GUI window is resized the controls within react - how they react is
determined by this function. To be able to resize a GUI window it needs to have
been created with the $WS_SIZEBOX and $WS_SYSMENU styles. See
GUICreate.

Docking Values Table
Resizing

Value

No displacement of

$GUI_DOCKAUTO 1
resize and reposition according to new window
size
$GUI_DOCKLEFT 2 Left side
$GUI_DOCKRIGHT 4 Right side
$GUI_DOCKHCENTER 8 Position will not move relative to horizontal
center
$GUI_DOCKTOP 32 Top side
$GUI_DOCKBOTTOM 64 Bottom side
$GUI_DOCKVCENTER 128
Position will not move relative to vertical
center
$GUI_DOCKWIDTH 256 Width will not change
$GUI_DOCKHEIGHT 512 Height will not change


Composite resizing
$GUI_DOCKSIZE 768 (256+512) Size will not change
$GUI_DOCKMENUBAR

544
(512+32) so the control will stay at the top of
window with no change in Height
$GUI_DOCKSTATEBAR

576
(512+64) so the control stay at the bottom of
the window with no change in Height

$GUI_DOCKALL 802
(2+32+256+512) so the control will not move
during resizing
$GUI_DOCKBORDERS 102
(2+4+32+64) so the control will grow as the
window

The default resizing for a given control is control dependent see the control doc.
A default value for any control can be set with GUIResizeMode (Option).

The automatic resizing event can be disabled if GUIEventOptions (Option) is set to
1.
Related
GUIEventOptions (Option),GUIResizeMode (Option)
Example

#include <GUIConstantsEx.au3>
#include <WindowsConstants.au3>
#include <EditConstants.au3>

Opt('MustDeclareVars', 1)

Example()

Func Example()
Local $nEdit, $nOk, $nCancel, $msg

Opt("GUICoordMode", 2)
GUICreate("My InputBox", 190, 114, -1, -1, $WS_SIZEBOX +
$WS_SYSMENU) ; start the definition

GUISetIcon("Eiffel Tower.ico")

GUISetFont(8, -1, "Arial")

GUICtrlCreateLabel("Prompt", 8, 7) ; add prompt info
GUICtrlSetResizing(-1, $GUI_DOCKLEFT + $GUI_DOCKTOP)

$nEdit = GUICtrlCreateInput("Default", -1, 3, 175, 20, $ES_PASSWORD) ;
add the input area
GUICtrlSetState($nEdit, $GUI_FOCUS)
GUICtrlSetResizing($nEdit, $GUI_DOCKBOTTOM + $GUI_DOCKHEIGHT)

$nOk = GUICtrlCreateButton("OK", -1, 3, 75, 24) ; add the button that will
close the GUI
GUICtrlSetResizing($nOk, $GUI_DOCKBOTTOM + $GUI_DOCKSIZE +
$GUI_DOCKHCENTER)

$nCancel = GUICtrlCreateButton("Annuler", 25, -1) ; add the button that will
close the GUI
GUICtrlSetResizing($nCancel, $GUI_DOCKBOTTOM + $GUI_DOCKSIZE +
$GUI_DOCKHCENTER)

GUISetState() ; to display the GUI

; Run the GUI until the dialog is closed
While 1
$msg = GUIGetMsg()

If $msg = $GUI_EVENT_CLOSE Then ExitLoop
WEnd

EndFunc ;==>Example



Function Reference
GUICtrlSetState
thay đổi trạng thái của control.
GUICtrlSetState ( controlID, state )
Parameters
controlID control id
state trạng thái

Return Value
Success:

Returns 1.
Failure:

Returns 0.

Remarks

State table
trạng thái

giải nghĩa

ko thay đổi 0
$GUI_UNCHECKED Radio, Checkbox hay ListViewItem ko đc tick nữa
$GUI_CHECKED tick vào Radio, Checkbox hay ListViewItem

$GUI_INDETERMINATE
Checkbox having the tristate attribute will be
greyed.
$GUI_AVISTART bắt đầu chạy Avi control
$GUI_AVISTOP tạm dừng Avi control
$GUI_AVICLOSE dừng luôn, xóa bỏ bộ nhớ Avi control
$GUI_DROPACCEPTED Control sẽ chấp nhận kéo thả trên nó
$GUI_NODROPACCEPTED

Control ko chấp nhận kéo thả trên nó
$GUI_SHOW hiện thị Control đã bị ẩn (hide)
$GUI_HIDE ẩn Control
$GUI_ENABLE cho phép control hoạt động
$GUI_DISABLE cho phép control hoạt động
$GUI_FOCUS
ghi chuyển sự tập tring bàn phím và chuột tới
controol
$GUI_NOFOCUS bỏ focus
$GUI_DEFBUTTON đặt control như nút mặc định trên window
$GUI_EXPAND TreeViewItem sẽ hiện thị hết các items con.
$GUI_ONTOP Control sẽ ở trên các control khác

State values can be summed up as for example $GUI_DISABLE + $GUI_HIDE
sets the control in an disabled and hidden state.

If an AVI control has to be hidden with $GUI_HIDE it should be closed with
$GUI_AVICLOSE.

State of a "contextmenu" control cannot be changed.
State of a "listviewitem" control can be changed if the associated "listview" control

has been created with an extended style $LVS_EX_CHECKBOXES.
$GUI_FOCUS and $GUI_NOFOCUS can be used on specific listviewitem
provided listview control style allows to display it : $LVS_SHOWSELALWAYS.
State of a "menu or a ""menuitem" control cannot be hidden.

! Important information for $GUI_EXPAND: this state is only used for
TreeViewItems. If you want to use this 'action' then at least 1 Sub-TreeViewItem
has to exist/created under this item !
If you want to select another item in a TreeView then you can use $GUI_FOCUS -
the parent TreeView gets the window focus and the specified item is marked as