PLASTICS ADDITIVESAN INDUSTRIAL GUIDE phần 3 pot

Stabilizers 1

Section XX
Stabilizers
2 Plastics Additives

Akcros Chemicals America: Additives for Rigid PVC
Applications:
General Purpose Stabilizers:
T-4654:
Weather Ability: Excellent
Color Hold, Term Stability, Clarity, Flexible PVC, Plastisols:
Recommended
Odor, Lubricity: Good
T-4791:
Color Hold, Rigid Foam: Excellent
Term Stability: Recommended
Clarity, Weather Ability, Flexible PVC, Odor, Lubricity,
Plastisols: Good
T-4905:
Term Stability, Clarity, Weather Ability, Flexible PVC: Excellent
Odor: Recommended
Color Hold, Lubricity, Plastisols: Good
T-5003:
Color Hold, Term Stability, Weather Ability, Lubricity: Excellent
Clarity, Flexible PVC, Odor: Good
T-5005:
Odor, Lubricity, Rigid Foam: Excellent
Color Hold, Term Stability, Clarity, Weather Ability, Flexible
PVC:
Good

T-5007:
Color Hold, Lubricity: Excellent
Term Stability, Weather Ability: Recommended
Clarity, Flexible PVC, Odor: Good
T-5063:
Color Hold, Term Stability, Clarity, Weather Ability, Odor:
Excellent
Flexible PVC: Recommended
Lubricity, Plastisols: Good
T-5095:
Color Hold, Clarity, Odor: Excellent
Term Stability, Weather Ability, Flexible PVC: Recommended
Lubricity: Good
T-5160:
Color Hold, Term Stability, Weather Ability, Lubricity: Excellent
Odor: Good
Stabilizers 3

Akcros Chemicals America: Additives for Rigid PVC Applications
(Continued):
General Purpose Stabilizers (Continued):
T-5172:
Color Hold, Term Stability, Weather Ability: Excellent
Lubricity: Recommended
Odor: Good
T-5178:
Color Hold, Term Stability, Weather Ability, Lubricity: Excellent
Odor: Good
T-7020:
Color Hold, Clarity, Weather Ability, Odor: Excellent

Term Stability, Lubricity: Recommended
Food Grade Applications:
T-883:
Color Hold, Term Stability, Clarity, Weather Ability, Odor:
Excellent
Lubricity: Recommended
T-885:
Color Hold, Term Stability, Clarity, Weather Ability, Odor:
Excellent
Lubricity: Recommended
T-7021:
Color Hold, Term Stability, Clarity, Weather Ability, Odor:
Excellent
Lubricity: Recommended
4 Plastics Additives

Akcros Chemicals America: Additives for Rigid PVC Applications
(Continued):
Specialty Applications:
T-186:
Term Stability, Weather Ability, Flexible PVC, Plastisols:
Excellent
Color Hold, Clarity, Odor: Recommended
Lubricity: Good
T-876:
Weather Ability, Flexible PVC, Plastisols: Excellent
Color Hold, Term Stability, Clarity, Odor: Recommended
Lubricity: Good
T-876A:
Weather Ability, Flexible PVC, Plastisols: Excellent

Color Hold, Term Stability, Clarity, Odor: Recommended
Lubricity: Good
T-878M:
Color Hold, Clarity, Weather Ability, Flexible PVC, Plastisols:
Excellent
Term Stability, Odor: Recommended
Lubricity: Good
T-5507A:
Weather Ability: Excellent
Color Hold, Term Stability, Clarity, Flexible PVC, Odor, Lubricity,
Plastisols: Recommended
TL:
Lubricity, Plastisols: Excellent
Color Hold, Term Stability, Clarity, Weather Ability, Flexible PVC,
Odor: Recommended
Stabilizers 5

Akcros Chemicals America: Stabilizers for Flexible Vinyl:
AKCROS’ ABC Line-Foam Stabilizer/Activators:
Akcros stabilizer/activators have been formulated to provide
controlled, uniform gas evolution for the production of PVC foams
utilizing azodicarbonamide as the blowing agent. The ABC series of
blowing agent catalysts are primary materials and act as both heat
stabilizers and gas generation activators. No secondary stabilizer is
normally required. Thus, with the availability of such blowing agent
catalysts, the use range of azodicarbonamide is extended to a
significant degree.
ABC-1:
Decomposition Range: 340 to 360F
Activity Rate: High

ABC-2:
Decomposition Range: 330 to 350F
Activity Rate: High
ABC-6*:
Decomposition Range: 390 to 400F
Activity Rate: Low
ABC-7:
Decomposition Range: 390 to 410F
Activity Rate: Low
ABC-18:
Decomposition Range: 340 to 360F
Activity Rate: Medium
ABC-4810:
Decomposition Range: 330 to 350F
Activity Rate: High
· *Note: ABC-6 functions as a stabilizer/de-activator resulting
· in a controlled blow with very fine cell structure.
6 Plastics Additives

Akcros Chemicals America: Stabilizers for Flexible Vinyl:
Calcium Zinc Based Stabilizers:
General Purpose:
LT-2001M:
Heat Stability, Printability, Plastisol: Excellent
Lubricity, Clarity, Extrusion/Inj.Mldg., Calendering: Good
LT-4468:
Plastisol: Excellent
Printability: Recommended
Heat Stability, Clarity: Good
CAZ-4842:

Heat Stability, Plastisol: Excellent
Clarity: Good
CAZ-4949:
Heat Stability: Excellent
Lubricity, Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering:
Recommended
Food Contact:
CZ-11D:
Foam Activation, Extrusion/Inj.Mldg., Calendering, Plastisol:
Recommended
Heat Stability, Lubricity, Clarity: Good
CZ-19A:
Heat Stability, Lubricity, Foam Activation, Extrusion/Inj.Mldg.,
Calendering: Recommended
Clarity: Good
CZL-717:
Clarity, Plastisol: Excellent
Heat Stability, Low Plateout, Printability: Recommended
Foam Activation, Calendering: Good
CZL-720:
Clarity, Plastisol: Excellent
Printability: Recommended
Heat Stability, Low Plateout, Foam Activation: Good
CZL-720A:
Clarity, Plastisol: Excellent
Heat Stability, Printability: Recommended
Low Plateout, Foam Activation, Extrusion/Inj.Mldg., Calendering:
Good
Stabilizers 7

Akros Chemicals America: Stabilizers for Flexible Vinyl:
Chelators and Auxiliaries:
CH-55 (FDA):
Printability, Extrusion/Inj.Mldg., Calendering, Plastisol:
Recommended
Heat Stability, Clarity: Good
CH-301:
Printability: Excellent
Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended
Clarity, Plastisol: Good
P-2307*:
Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering,
Plastisol: Recommended
Low-odor/Volatility, Printability: Good
SA-5038:
Printability: Excellent
Heat Stability, Foam Activation, Extrusion/Inj.Mldg., Calendering:
Recommended
Ca Stearate:
Heat Stability, Lubricity: Excellent
Low-odor/Volatility, Extrusion/Inj.Mldg., Calendering: Recommended
Printability: Good
Zn Stearate:
Lubricity: Excellent
Low-odor/Volatility, Foam Activation, Extrusion/Inj.Mldg.,
Calendering: Recommended
Heat Stability, Clarity, Printability: Good
*Note: PLASTOFLEX 2307 is a high-quality epoxidized soy bean oil
with a minimum oxirane content of 6.8%.
8 Plastics Additives

Akcros Chemicals America: Stabilizers for Flexible Vinyl:
Metal
Soap Based Stabilizers:
Barium Cadmium Based Stabilizers:
BC-103A:
Heat Stability, Clarity, Foam Activation, Extrusion/Inj. Mldg.,
Calendering, Plastisol: Recommended
Printability: Good
BC-103L:
Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended
Lubricity, Clarity, Printability, Plastisol: Good
BC-111:
Extrusion/Inj.Mldg., Calendering: Recommended
Heat Stability, Clarity, Printability, Plastisol: Good
BC-4746S:
Heat Stability, Printability, Extrusion/Inj. Mldg., Calendering:
Excellent
Lubricity, Clarity, Low Plateout: Recommended
Low-odor/Volatility: Good
BC-4962:
Heat Stability, Lubricity, Extrusion/Inj. Mldg., Calendering:
Excellent
Barium Zinc Based Stabilizers:
LT-4797:
Heat Stability, Low Plateout, Printability: Recommended
Clarity, Low Fog, Extrusion/Inj.Mldg., Calendering, Plastisol: Good
LT-4798:
Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg.,
Plastisol: Recommended

Lubricity, Foam Activation, Calendering: Good
LT-4813:
Heat Stability, Low Plateout, Printability, Calendering: Excellent
Lubricity, Clarity, Foam Activation, Extrusion/Inj. Mldg.:
Recommended
BZ-4903M:
Heat Stability, Extrusion/Inj. Mldg., Calendering: Recommended
Lubricity, Clarity: Good
BZ-4929:
Heat Stability, Foam Activation: Excellent
Extrusion/Inj.Mldg., Calendering: Recommended
Printability: Good
Stabilizers 9

Akcros Chemicals America: Stabilizers for Flexible Vinyl:
Metal Soap Based Stabilizers (Continued):
Barium Zinc Based Stabilizers (Continued):
BZ-4946:
Clarity: Excellent
Heat Stability, Low Plateout, Printability, Extrusion/Inj. Mldg.,
Calendering: Recommended
Lubricity: Good
BZ-4951:
Heat Stability, Lubricity, Calendering: Excellent
Low-odor/Volatility, Extrusion/Inj. Mldg.: Recommended
BZ-4975:
Low-odor/Volatility: Excellent
Heat Stability, Extrusion/Inj.Mldg.: Recommended
Lubricity, Clarity: Good
BZ-4996:

Clarity: Excellent
Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended
Lubricity, Low Plateout: Good
BZ-5023:
Low-odor/Volatility, Low Fog: Excellent
Heat Stability, Extrusion/Inj.Mldg.: Recommended
Low Plateout: Good
BZ-5043:
Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering: Excellent
Low Plateout, Printability: Excellent
Lubricity: Good
BZ-5046:
Low Fog: Excellent
Heat Stability, Extrusion/Inj.Mldg., Calendering: Recommended
BZ-4922:
Heat Stability, Lubricity, Low-odor/Volatiliy: Excellent
Low Fog, Foam Activation: Recommended
Barium Zinc ESO Blends:
LT-4801:
Plastisol: Recommended
Heat Stability, Clarity, Printability, Extrusion/Inj.Mldg.,
Calendering: Good
LT-4803:
Heat Stability, Clarity, Extrusion/Inj.Mldg., Calendering,
Plastisol: Recommended
Printability, Foam Activation: Good
BZ-4864:
Printability, Calendering: Recommended
Heat Stability, Clarity, Low Plateout, Extrusion/Inj.Mldg.: Good
10 Plastics Additives

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Carboxylates:
Butyl:
DBTL/C:
Fields: Plastisol
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
Limited self-lubrication, Very good initial color,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 70
Color Gardner (max.): 3
Density at 20C (g/cm3): 1.05
M 15:
Fields: Plastisol
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
Limited self-lubrication, Very good initial color,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 130
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.08
MS:
Fields: Extrusion, Blown Films, Rigid PVC: Technical, Semi-rigid
PVC, Flexible PVC
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color, Low
fogging, Stabilizing E-PVC, High Vicat temperature
Powder
Color Gardner (max.): White
Density at 20C (g/cm3): 1.50
MSL:

Fields: Extrusion, Rigid PVC: Technical
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 800
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.34
Stabilizers 11

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Carboxylates (Continued):
Butyl (Continued):
MSQ/N:
Fields: Extrusion, Blown Films, Rigid PVC: Technical, Semi-rigid PVC
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 400
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.22
MST:
Fields: Plastisol
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 300
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.15
Octyl:
MSO:

Fields: Blown Films, Rigid PVC: Nontox
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color, Low
fogging, High Vicat temperature
Powder
Color Gardner (max.): White
Density at 20C (g/cm3): 1.23
MSO/L:
Fields: Blown Films, Rigid PVC: Nontox
Properties: Transparent, Weather resistant, Low odor, Phenol-free,
No self-lubrication, Very good initial color
Viscosity at 20C (mPa.s): 300
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.18
12 Plastics Additives

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptides:
Butyl:
M21-50
Fields: Extrusion, Blown Films, Injection/Blow Molding, Flexible
PVC, Plastisol
Properties: Transparent, Low odor, No self-lubrication, Very good
initial color, Very good color hold
Viscosity at 20C (mPa.s): 50
Color Gardner (max.): 2
Density at 20C (g/cm3): 0.99
M-25:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC

Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term
stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 90
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.13
M25S:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Technical: Semi-rigid PVC, Flexible PVC,
Plastisol
Properties: Transparent, Low odor, Phenol-free, No self-lubrication,
Very good initial color, Very good color hold, Very good
long term stability, Low fogging, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 90
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.13
M 25-85:
Fields: Calendering, Extrusion, Rigid PVC: Technical, Semi-rigid PVC
Properties: Transparent, Phenol-free, Limited self-lubrication, Very
good initial color, Very good color hold
Viscosity at 20C (mPa.s): 80
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.08
Stabilizers 13

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptides (Continued):
Butyl (Continued):
M26SF
:

Fields: Calendering, Extrusion, Rigid PVC: Technical, Semi-rigid PVC
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term
stability
Viscosity at 20C (mPa.s): 100
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.14
M 170:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Technical, Semi-rigid PVC, Flexible PVC
Properties: Transparent, Phenol-free, Limited self-lubrication, Very
good initial color, Very good color hold, Very good long
term stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 80
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.10
M-260:
Fields: Plastisol
Properties: Transparent, No self-lubrication, Very good initial
color, (Very good color hold, Stabilizing E-PVC)
Viscosity at 20C (mPa.s): 250
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.12
M 69:
Fields: Semi-rigid PVC, Flexible PVC, Plastisol
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 150
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.06

M69S:
Fields: Semi-rigid PVC, Flexible PVC, Plastisol
Properties: Transparent, Low odor, Phenol-free, No-self lubrication,
Very good initial color, Very good color hold, Stabil-
izing E-PVC
Viscosity at 20C (mPa.s): 150
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.06
14 Plastics Additives

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptides (Continued):
Butyl (Continued):
M70:
Fields: Calendering, Extrusion, Blown Films, Flexible PVC,
Plastisol
Properties: Transparent, Phenol-free, No self-lubrication, Very
good initial color, Very good color hold, Stabilizing
E-PVC
Viscosity at 20C (mPa.s): 100
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.01
M 71:
Fields: Extrusion, Injection Blow Molding, Rigid PVC: Technical,
Semi-rigid PVC
Properties: Transparent, Limited self-lubrication, Very good
initial color, Very good color hold
Viscosity at 20C (mPa.s): 100
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.10

X-AB 7:
Fields: Calendering, Blown Films, Rigid PVC: Technical, Semi-rigid
PVC, Flexible PVC
Properties: Transparent, Phenol free, Limited self-lubrication, Very
good initial color, Very good color hold, Very good long
term stability
Viscosity at 20C (mPa.s): 110
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.12
Stabilizers 15

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptides (Continued):
Octyl:
OM 510 S:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox,
Properties: Transparent, Low odor, Phenol-free, No self-lubrication,
Very good initial color, Very good color hold, Very good
long term stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 150
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.11
OM 700:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term
stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 110

Color Gardner (max.): 2
Density at 20C (g/cm3): 1.10
OM 700 S:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Low odor, Phenol-free, No self-lubrication,
Very good initial color, Very good color hold, Very good
long term stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 110
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.10
OM 710:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long
stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 130
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.11
16 Plastics Additives

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptides (Continued):
Octyl (Continued):
OM 710 D:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term

stability, Stabilizing E-PVC
Viscosity at 20C (MPa.s): 120
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.10
OM 710 N:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term
stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 130
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.09
OM 710 S:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Nontox
Properties: Transparent, Low odor, Phenol-free, No self-lubrication,
Very good initial color, Very good color hold, Very good
long term stability, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 130
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.11
OM 1000:
Fields: Calendering, Rigid PVC: Nontox
Properties: Transparent, Phenol-free, Good self-lubrication, Very
good initial color, Very good color hold
Viscosity at 20C (mPa.s): 400
Color Gardner (max.): 6
Density at 20C (g/cm3): 1.00
Stabilizers 17

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptide/Carboxylates:
Butyl:
M 25-32:
Fields: Extrusion, Flexible PVC, Plastisol
Properties: Transparent, Weather resistant, Phenol-free, No self-
lubrication, Very good initial color, Very good color
hold, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 200
Color Gardner (max): 2
Density at 20C (g/cm3): 1.09
M 36:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Technical, Semi-rigid PVC
Properties: Transparent, Phenol-free, No self-lubrication, Very good
initial color, Very good color hold, Very good long term
stability, Low fogging, Stabilizing E-PVC, High Vicat
temperature
Powder
Color: White
Density at 20C (g/cm3): 1.49
M 62:
Fields: Plastisol
Properties: Transparent, Weather resistant, Phenol-free, No self-
lubrication, Very good initial color, very good color
hold, Kicking activity, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 280
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.15

M62A:
Fields: Plastisol
Properties: Transparent, Weather resistant, Phenol-free, No self-
lubrication, Very good initial color, Very good color
hold, Kicking activity, Stabilizing E-PVC
Viscosity at 20C (mPa.s): 200
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.15
18 Plastics Additives

Baerlocher U.S.A.: BAEROSTAB Organotin Stabilizers: Organotin
Mercaptide/Carboxylates (Continued):
Butyl (Continued):
M 63:
Fields: Extrusion, Rigid PVC: Technical
Properties: Weather resistant, Phenol-free, Good self-lubrication,
Very good initial color, Very good color hold
Viscosity at 20C (mPa.s): 130
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.07
M 90:
Fields: Plastisol
Properties: Transparent, Weather resistant, Phenol-free, No self-
lubrication, Very good initial color, Very good color
hold, Very good long term stability, Kicking activity,
Stabilizing E-PVC
Viscosity at 20C (mPa.s): 110
Color Gardner (Max.): 2
Density at 20C (g/cm3): 1.16
MST/M 260:

Fields: Plastisol
Properties: Transparent, Weather resistant, No self-lubrication,
Very good initial color, Very good color hold, Very
good long term stability
Viscosity at 20C (mPa.s): 300
Color Gardner (max.): 2
Density at 20C (g/cm3): 1.14
Octyl:
OM 36:
Fields: Calendering, Extrusion, Blown Films, Injection/Blow Molding,
Rigid PVC: Technical, Semi-rigid PVC
Properties: Transparent, Low odor, Phenol-free, No self-lubrication,
Very good initial color, Very good color hold, Very good
long term stability, Low fogging, Stabilizing E-PVC,
High Vicat temperature
Powder
Color: White
Density at 20C (g/cm3): 1.28
Stabilizers 19

Baerlocher U.S.A.: Lead Stabilizers: Lead Commodities:
BAROSTAB V 220 MC:
Chemical basic: Tribasic lead sulphate
Residue on ignition (%): 96.0-98.0
Lead content (%): 81.0-83.0
Moisture (%): max. 0.2
Density (g/cm3): 6.6
Barostab V 420 MC:
Chemical basic: tetrabasic lead sulphate
Residue on ignition (%): 97.0-99.0

Lead content (%): 82.0-84.0
Moisture (%): max. 0.2
Density (g/cm3): 7.2
PEBETAL:
Chemical basic: dibasic lead phthalate
Residue on ignition (%): 78.5-80.5
Lead content (%): 74.0-76.0
Moisture (%): max. 0.2
Density (g/cm3): 4.5
Barostab Pb 51 S:
Chemical basic: dibasic lead stearate
Residue on ignition (%): 54.5-56.5
Lead content (%): 50.0-52.0
Moisture (%): max. 0.2
Density (g/cm3): 2.0
Barostab Pb 28 F:
Chemical basic: neutral lead stearate
Residue on ignition (%): 28.5-30.5
Lead content (%): 27.0-29.0
Moisture (%): max. 1.0
Density (g/cm3): 1.4
PEBEFOS FP:
Chemical basic: dibasic lead phosphite
Residue on ignition (%): 97.9-99.9
Lead content (%): 81.0-83.0
Moisture (%): max. 0.8
Density (g/cm3): 7.0
PEBEFOS (SULFOFOS C):
Chemical basic: dibasic lead phosphite/sulphite
Residue on ignition (%): 97.9-99.9

Lead content (%): 81.0-83.0
Moisture (%): max. 0.8
Density (g/cm3): 6.1
20 Plastics Additives

Baerlocher U.S.A.: Lead Stabilizers: Characteristics of
Commodity Modifications:
Basis BAROSTAB V 220 MC:
BAROSTAB E 500:
Residue on ignition (%): 83.1-87.1
Lead content (%): 72.0-76.0
Density (g/cm3): 3.8
Barostab TX 500:
Residue on ignition (%): 79.5-82.5
Lead content (%): 66.5-69.5
Density (g/cm3): 3.3
Barostab SMS 500:
Residue on ignition (%): 80.6-83.6
Lead content (%): 66.5-69.5
Density (g/cm3): 3.3
Barostab V 220 MC/DOP:
Residue on ignition (%): 93.0-96.0
Lead content (%): 78.0-81.0
Density (g/cm3): 5.6
Barostab V 220 MC/DIDP:
Residue on ignition (%): 93.0-96.0
Lead content (%): 78.0-81.0
Density (g/cm3): 5.6
Barostab V 220 TM:
Residue on ignition (%): 93.0-96.0

Lead content (%): 78.0-81.0
Density (g/cm3): 5.6
Barostab V 220 MC/B:
Residue on ignition (%): 93.0-96.0
Lead content (%): 78.0-81.0
Density (g/cm3): 5.8
Barostab V 220 MC/DIS:
Residue on ignition (%): 92.0-95.0
Lead content (%): 72.0-76.0
Density (g/cm3): 5.4
Barostab V 220 LD:
Residue on ignition (%): 88.0-91.0
Lead content (%): 72.0-76.0
Density (g/cm3): 4.6
Barostab V 220 LTM:
Residue on ignition (%): 86.0-89.0
Lead content (%): 70.0-73.0
Density (g/cm3): 4.1
Stabilizers 21

Baerlocher U.S.A.: Lead Stabilizers: Characteristics of
Commodity Modifications (Continued):
Basis BAROSTAB V 420 MC:
Barostab V 420 MC-B/DOP
:
Residue on ignition (%): 90.0-93.0
Lead content (%): 76.0-79.0
Density (g/cm3): 5.2
Basis PEBETAL:
Barostab E 503:

Residue on ignition (%): 67.7-69.7
Lead content (%): 62.6-65.6
Density (g/cm3): 3.0
Pebetal B:
Residue on ignition (%): 76.0-79.0
Lead content (%): 70.6-73.6
Density (g/cm3): 4.3
Pebetal-DOP:
Residue on ignition (%): 76.0-79.0
Lead content (%): 70.6-73.6
Density (g/cm3): 4.1
Pebetal TM:
Residue on ignition (%): 76.0-79.0
Lead content (%): 70.6-73.6
Density (g/cm3): 4.1
Pebetal LTM:
Residue on ignition (%): 71.1-73.1
Lead content (%): 64.0-67.0
Density (g/cm3): 3.3
22 Plastics Additives

Baerlocher U.S.A.: Lead Stabilizers: Characteristics of
Commodity Modifications (Continued):
Basis BAROSTAB Pb 51 S:
Barostab E 504:
Residue on ignition (%): 49.0-52.0
Lead content (%): 44.5-47.5
Density (g/cm3): 1.8
BAROPAN Pb 51 S/ES:
Residue on ignition (%): 51.8-54.8

Lead content (%): 45.0-47.0
Density (g/cm3): 1.9
Barostab Pb 51 S/DOP:
Residue on ignition (%): 52.8-55.8
Lead content (%): 48.0-51.0
Density (g/cm3): 1.9
Barostab Pb 51 S/TM:
Residue on ignition (%): 52.8-55.8
Lead content (%): 48.0-51.0
Density (g/cm3): 1.9
Basis Pb 28 F:
Barostab Pb 28 AV:
Residue on ignition (%): 28.4-30.4
Lead content (%): 27.0-29.0
Density (g/cm3): 1.4
Barostab TX Pb 28:
Residue on ignition (%): 29.0-31.0
Lead content (%): 28.0-30.0
Density (g/cm3): 1.4
Stabilizers 23

Baerlocher U.S.A.: Lead Stabilizers: Characteristics of
Commodity Modifications (Continued):
Basis PEBEFOS FP:
BAROSTAB E 502 FP:
Residue on ignition (%): 87.3-90.3
Lead content (%): 73.0-76.0
Density (g/cm): 4.4
Pebefos FP/ND:
Residue on ignition (%): 94.0-97.0

Lead content (%): 78.8-81.0
Density (g/cm3): 5.9
Pebefos XS:
Residue on ignition (%): 78.0-81.0
Lead content (%): 64.5-67.5
Density (g/cm3): 3.2
Basis Pebefos:
Barostab E 502:
Residue on ignition (%): 88.2-91.2
Lead content (%): 73.0-76.0
Density (g/cm3): 4.0
Pebefos /ND:
Residue on ignition (%): 95.0-98.0
Lead content (%): 78.0-81.0
Density (g/cm3): 5.3
Barostab SMS 502:
Residue on ignition (%): 81.9-84.9
Lead content (%): 67.8-70.8
Density (g/cm3): 3.2
24 Plastics Additives

Ciba Specialty Chemicals: Additives for Polyolefins:
Antioxidants (AO) & Processing Stabilizers:
Primary Antioxidants:
Irganox 1010:
High molecular weight, phenolic AO with low volatility; extends
long-term thermal stability (LTTS)
Irganox 1035:
Phenolic AO for cross-linked or carbon black containing systems
(i.e. cable compounds)

Irganox 1076:
Highly compatible, low-color phenolic AO for PE; available in
preferred product forms.
Irganox 1081:
High performance, highly compatible AO for cross-linked PE (i.e.
high voltage power cable)
Irganox 1330:
Extraction resistant phenolic AO with low water carryover for film
and tape
Irganox 1425 WL:
Phenolic AO with high extraction resistance; polyethylene wax
carrier
Irganox 3114:
Highly effective, non-discoloring phenolic antioxidant, high
extraction resistance
Irganox E 201:
Vitamin E, a highly efficient phenolic AO with consumer appeal and
excellent MF stability
Irganox E 217:
Granular, dispersible solid with GRAS coaddditives for food and
medical packaging
Irganox E 218:
Low dust vitamin E blend with calcium stearate for food and medical
packaging
Irganox MD 1024:
High performance phenolic AO for applications requiring metal
deactivation (Cu passivator)
Stabilizers 25

Ciba Specialty Chemicals: Additives for Polyolefins:

Antioxidants (AO) & Processing Stabilizers (Continued):
Primary Antioxidants (Continued):
Irganox E 201:
Vitamin E, a high efficiency phenolic AO with consumer appeal and
excellent MF stability
Irganox E 217:
Granular, dispersible solid with GRAS co-additives for food and
medical packaging
Irganox E 218:
Low dust vitamin E blend with calcium stearate for food and medical
packaging
Irganox MD 1024:
High performance phenolic AO for applications requiring metal
deactivation (Cu passivator)