Polyparaphenelene vinylene by pushkar badgujar



-Pushkar Badgujar
-FE 2
-1244

1. What is Electroluminescence?
2. Basic principles and working .
3. PPV(Polyparaphenylene vinylene)
4. Applications
5. Specific Example(OLED)


•
Electroluminescence (EL) is an optical phenomenon and electrical phenomenon in which a
material emits light in response to the passage of an electric current or to a strong electric field.
•
Textbook defn. “ The property in which a material produces bright light of different colours when
stimulated electronically is known as electroluminesence. The material which shows
electroluminescence,is called as electroluminescent material. ”
•
Examples of electroluminescent materials:
1.Electroluminescent devices are fabricated using either organic or inorganic electroluminescent
materials. The active materials are generally semiconductors of wide enough bandwidth to allow
exit of the light.
2.The most typical inorganic thin-film EL (TFEL) is ZnS:Mn with yellow-orange emission.
Examples of the range of EL material include:
3.Powdered zinc sulfide doped with copper (producing greenish light) or silver (producing bright
blue light)
4.Thin-film zinc sulfide doped with manganese (producing orange-red color)
5.Naturally blue diamond, which includes a trace of boron that acts as a dopant.

6.Semiconductors containing Group III and Group V elements, such as indium phosphide
(InP), gallium arsenide (GaAs), and gallium nitride (GaN).
7.Certain organic semiconductors, such as [Ru(bpy)
3
]
2+
(PF
6
-
)
2
, where bpy is 2,2'-bipyridine

•
Poly(p-phenylene vinylene) (PPV,
or polyphenylene vinylene) is a conducting
polymer.
•
PPV is the only polymer of this type that has so far
been successfully processed into a highly ordered
crystalline thin film.
•
PPV is easily synthesized in good purity and high
molecular weight.
poly(1,4-phenylene-1,2-ethenediyl)
•
Although insoluble in water, its precursors(a precursor is a compound that participates in
the chemical reaction that produces another compound.) can be manipulated in aqueous
solution.
•

The small optical band gap and its bright yellow fluorescence makes PPV a candidate in many
electronic applications such as light-emitting diodes (LED) and photovoltaic devices.
•
Moreover, PPV can be easily doped to form electrically conductive materials.
•
Its physical and electronic properties can be altered by the inclusion of functional side groups.

•
PPV can be synthesized by Wittig-type couplings between the bis(ylide) derived from an aromatic bisphosphonium salt and
dialdehyde, especially 1,4-benzenedialdehyde.
•
Textbook method employs the use of a precursor polymer poly α-n-octyl sulphinyl paraphenylene ethylene by heating it in
vacuum. Elimination of n-octylthiol introduces the double bonds in the chain.
reaction as follows :

•
PPV is a diamagnetic material and has a very low intrinsic electrical conductivity, on
the order of 10-13 S/cm.
•

The electrical conductivity increases upon doping with iodine, ferric chloride, alkali
metals, or acids. However, the stability of these doped materials is relatively low. In
general, unaligned, unsubstituted PPV presents only moderate conductivity with
doping.
•
Alkoxy-substituted PPVs are generally easier to oxidize than the parent PPV and
hence have much higher conductivities. Longer side chains lower the conductivity and
hinder interchain hopping of charge carriers.

•

Due to its stability, processability, and electrical and optical properties, PPV has
been considered for a wide variety of applications.
[1]
In 1989 the first polymer-
based light emitting diode (LED) was discovered using PPV as the emissive layer.
•
Polymers are speculated to have advantages over molecular materials in LEDs, such
as ease of processing, reduced tendency for crystallization, and greater thermal and
mechanical stability. Ever since the first breakthrough in 1989, a large number of
PPV derivatives have been synthesized and used for LED applications.
•
Although solid-state lasing has yet to be demonstrated in an organic LED, poly[2-methoxy-5-(2’-
ethylhexyloxy)-p-phenylene vinylene] (MEH-PPV) has been proven to be a promising laser dye due to
its high fluorescence efficiency in solution.
•
Polyphenylene vinylene is capable of electroluminescence, leading to applications in
polymer-based organic light emitting diodes. PPV was used as the emissive layer in the
first polymer light-emitting diodes.Devices based on PPV emit yellow-green light, and
derivatives of PPV obtained by substitution are often used when light of a different color
is required.
•
. In presence of even a small amount of oxygen, singlet oxygen is formed during
operation, by energy transfer from the excited polymer molecules to oxygen
molecules. These oxygen radicals then attack the structure of the polymer, leading to
its degradation. Special precautions therefore have to be kept during
manufacturing of PPV in order to prevent oxygen contamination.
•
PPV is also used as an electron-donating material in organic solar
cells. Although PPV-based devices suffer from poor absorption
and photodegradation, PPV and PPV derivatives (especially MEH-PPV and MDMO-

PPV) find frequent application in research cells.
OLED organic light-emitting diode
•
An OLED (organic light-emitting diode) is a light-emitting diode (LED) in which the emissive electroluminescent layer is a
film oforganic compound which emits light in response to an electric current. This layer of organic semiconductor material is
situated between two electrodes. Generally, at least one of these electrodes is transparent. OLEDs are used to create digital
displays in devices such as television screens, computer monitors, portable systems such as mobile phones, handheld games
consoles and PDAs.
•
An OLED display works without a backlight. Thus, it can display deep black levels and can be thinner and lighter than a liquid
crystal display (LCD). In low ambient light conditions such as a dark room an OLED screen can achieve a higher contrast
ratio than an LCD, whether the LCD uses cold cathode fluorescent lamps or LED backlight. Due to its low thermal conductivity, an
OLED typically emits less light per area .
!"#$
•
A typical OLED is composed of a layer of organic materials situated between two electrodes,
the anode and cathode, all deposited on a substrate. The organic molecules are electrically
conductive as a result of delocalization of pi electrons caused by conjugation over all or part
of the molecule.
•
During operation, a voltage is applied across the OLED such that the anode is positive with
respect to the cathode. A current of electrons flows through the device from cathode to
anode, as electrons are injected into the LUMO of the organic layer at the cathode and
withdrawn from the HOMO at the anode. This latter process may also be described as the
injection of electron holes into the HOMO. Electrostatic forces bring the electrons and the
holes towards each other and they recombine forming an exciton, a bound state of the
electron and hole. This happens closer to the emissive layer, because in organic
semiconductors holes are generally more mobile than electrons. The decay of this excited
state results in a relaxation of the energy levels of the electron, accompanied by emission
of radiation whose frequency is in the visible region. The frequency of this radiation depends

on the band gap of the material, in this case the difference in energy between the HOMO and
LUMO.
Schematic of a bilayer OLED: 1. Cathode (−), 2. Emissive (Polymer)Layer, 3. Emission of radiation,
4. Conductive Layer, 5. Anode (+)

