Caùc chöùc naêng kieåm tra
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.1
Information and Training Center
Knowledge for Automation
Kieåm tra vaø quan saùt (Status)
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.2
Information and Training Center
Knowledge for Automation
Caực cheỏ ủoọ hoaùt ủoọng ụỷ traùng thaựi chửụng trỡnh
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.3
Information and Training Center
Knowledge for Automation
Sử dụng điểm Trigger ở trạng thái chương trình
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.4
Information and Training Center
Knowledge for Automation
Chọn thông tin hiển thò trạng thái chương trình
LAD/STL/FBD Editor -> Options ->Customize
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
... Hay trạng thái đang chạy với
việc nhấp chuột phải
on
29.10.15
STOE_06VN.5
Information and Training Center
Knowledge for Automation
Kích hoaït coâng cuï "Monitor/Modify Variables"
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.6
Information and Training Center
Knowledge for Automation
Vaøo baûng bieán
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.7
Information and Training Center
Knowledge for Automation
Quan saựt vaứ ủieu khieồn bieỏn
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.8
Information and Training Center
Knowledge for Automation
Đặt điểm Trigger
PII
Bắt đầu xử lý chương trình chu kỳ
Xử lý
chương trình
chu kỳ
Chuyển đổi:
RUN --> STOP
Kết thúc xử lý
chương trình chu kỳ
PIQ
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.9
Information and Training Center
Knowledge for Automation
Lửu trửừ moọt baỷng bieỏn
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.10
Information and Training Center
Knowledge for Automation
Mụỷ moọt baỷng bieỏn
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.11
Information and Training Center
Knowledge for Automation
Tạo kết nối với CPU
Các CPU có thể kết nối
CPU được
kết nối
trực tiếp
Station 1
CPU đã được
thiết kế
(VAT từ HW
-Station
“Station 2“)
Station 2
Station 3
PG
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.12
Information and Training Center
Knowledge for Automation
Điều khiển các ngõ ra ở chế độ Stop
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.13
Information and Training Center
Knowledge for Automation
Cöôõng böùc (Forcing)
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.14
Information and Training Center
Knowledge for Automation
Ñieåm döøng (phaàn 1) (Breakpoints)
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.15
Information and Training Center
Knowledge for Automation
Điểm dừng (Phần 2)
Điểm
dừng
Câu lệnh
tiếp theo
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.16
Information and Training Center
Knowledge for Automation
Bài tập: Quan sát và điều khiển các biến
Thiết bò luyện tập 32 kênh
Thiết bò luyện tập 16 kênh
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.17
Information and Training Center
Knowledge for Automation
Bài tập: Điều khiển biến ở chế độ Stop
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.18
Information and Training Center
Knowledge for Automation
Bài tập: Sử dụng điểm trigger ở điều khiển biến
Thêm Network vào OB 1 ở S7 program "My Program"
(Q 4.6)
(Q 4.6)
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.19
Information and Training Center
Knowledge for Automation
Baứi taọp: Cửụừng bửực
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.20
Information and Training Center
Knowledge for Automation
Bài tập: Phối hợp quan sát trạng thái chương trình và biến
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
STOE_06VN.21
Information and Training Center
Knowledge for Automation