Trình quản lý SIMATIC
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.1
Information and Training Center
Knowledge for Automation
Từ quá trình đến chương trình
Project Management
SIMATIC Manager
Hardware
FB21
OB1
I1.0
SIMATIC S7
Q4.0
Software
Process
Siemens AG 1999. All rights reserved.
I1.1
Date:
File:
29.10.15
PRO1_02E.2
Information and Training Center
Knowledge for Automation
Công cụ STEP 7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.3
Information and Training Center
Knowledge for Automation
Khởi động trình quản lý SIMATIC
or
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.4
Information and Training Center
Knowledge for Automation
Thực đơn quản lý và thanh công cụ SIMATIC
Thanh tiêu đề
Thanh thực đơn
Thanh công cụ
Thanh trạng thái
Thanh nhiệm vụ
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.5
Information and Training Center
Knowledge for Automation
Thanh công cụ của trình quản lý SIMATIC
Windows 95 Symbols
STEP 7 Symbols
Những nút truy cập màn hình
Card nhớ S7
Tải xuống (vào PLC)
Bộ lọc có định nghĩa
Bộ lọc tích cực
Mô phỏng modul (S7-PLCSIM)
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.6
Information and Training Center
Knowledge for Automation
Cấu trúc chương trình STEP 7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.7
Information and Training Center
Knowledge for Automation
Tổng quan trình quản lý trực tuyến, ngoại tuyến SIMATIC
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.8
Information and Training Center
Knowledge for Automation
Vị trí nhớ chương trình
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.9
Information and Training Center
Knowledge for Automation
Tạo một chương trình
Enter project
name here
and confirm
with "OK"
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.10
Information and Training Center
Knowledge for Automation
Chèn một chương trình S7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.11
Information and Training Center
Knowledge for Automation
Chèn thêm khối vào S7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.12
Information and Training Center
Knowledge for Automation
Hệ thống trợ giúp của STEP 7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.13
Information and Training Center
Knowledge for Automation
Các trợ giúp ngữ cảnh của STEP 7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.14
Information and Training Center
Knowledge for Automation
Thư viện mẫu
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.15
Information and Training Center
Knowledge for Automation
Bài tập: Tạo một chương trình
Nhập tên
chương trình
và ấn "OK"
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.16
Information and Training Center
Knowledge for Automation
Bài tập: Chèn một chương trình S7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.17
Information and Training Center
Knowledge for Automation
Bài tập: Chèn một khối vào S7
SIMATIC S7
Siemens AG 1999. All rights reserved.
Date:
File:
29.10.15
PRO1_02E.18
Information and Training Center
Knowledge for Automation
Bài tập: Reset bộ nhớ CPU
Làm bằng tay
1.
2.
Yêu cầu 3.
Reset
bộ nhớ
1.
Thể hiện
Reset
bộ nhớ 2.
Chọn vị trí STOP
Giữ núm trọn ở vị
trí “MRES” cho đến
khi đèn STOP chớp
chậm 2 lần
Nhả núm chọn
(tự động trở về vị
trí STOP)
1.
3.
Thực đơn tuỳ chọn:
PLC -> Clear/Reset
Giữ núm chọn ở vị
trí “MRES “đèn
STOP chớp nhanh
Nhả núm chọn
(Tự động trở về
vị trí “STOP”)
1.
Xác nhận Reset bộ
nhớ bằng cách ấn
“OK”.
SIMATIC S7
Siemens AG 1999. All rights reserved.
Sau khi có Card nhớ
Từ máy lẩp trình
2.
Núm chọn lựa ở vị
trí “RUN-P”
Thực đơn tuỳ chọn:
PLC -> Operating
Mode -> Stop
1.
2.
3. Đèn LED “STOP”
chớp chậm.
1. Giữ núm trọn ở vị
trí “MRES“
(“STOP” LED chớp
nhanh)
•
Date:
File:
29.10.15
PRO1_02E.19
Núm chọn lựa ở vị
trí “STOP”
Cài Card nhớ
Nhả nút chọn lựa
để tự động trở về
vị trí “STOP”
Information and Training Center
Knowledge for Automation