Machine design, tập 83, số 16, 2011

September 22, 2011
A Penton Media Publication
Tune in to EngineeringTV.com

High-tech

Zeppelins
page 42

CONVERTING GLASS
BOTTLES TO PET,
page 23
WHEN SOLAR ARRAYS
CATCH FIRE,
page 50
HOW TO SELECT
PNEUMATIC
CYLINDERS,
page 56
AIR CUSHIONS THAT
SELF-ADJUST,
page 64


Stop Your Fretting

Baldor
Dodge® Grip Tight® Adapter ball bearings are
the solution for damage-free shafting, reduced vibration
and greater inventory cost savings. Our unique push/
pull adapter system provides fully-concentric 360°
shaft contact for quick installation or removal.

• Unmatched Quality

Off-the-shelf and shaft ready, Grip Tight Adapter ball
bearings are proven to reduce labor/maintenance
costs and stop your fretting once and for all.

• Lower Total Cost of Ownership

dodge-pt.com

• Quickest Delivery Available

baldor.com

479-646-4711

©2011 Baldor Electric Company

RS# 101

• Superior Reliability


Ultra Lights

8000 psid
.125" Dia. Lee Chek
0.75 Grams

With today's high cost of fuel, it's never been
more important to shed aircraft weight. Fortunately,
The Lee Company had plenty of runway with this
challenge – by making it our priority 60 years ago.
As a result, our Ultra Light products are now even
smaller and lighter – some weighing less than the
page you're reading. And of course, they're just as
reliable as ever. Lee Plugs®, restrictors, valves and
screens are unsurpassed in offering breadth of choice
and peace of mind. No one offers more experience
designing, manufacturing and ensuring zero-defect,
as-promised quality. Which helps explain why we're
on board every commercial and military aircraft that
leaves the ground today.
Call today for the latest edition of our Technical
Hydraulic Handbook, and discover hundreds of ways
to put your next design on a low fuel diet.

The Lee Company
2 Pettipaug Road
Westbrook, CT 06498 USA
860-399-6281
www.theleeco.com

Westbrook

•

London

•

Paris

•

Frankfurt

RS# 102

•

Milan

•

Stockholm


VOLUME 83
ISSUE 16
SEPTEMBER 22, 2011

pneumatics technology guide

cylinder
cushions
adapt
on the
fly

FEATURES

Self-adjusting cushion

self-adjusting air cushions
let machines run smoother and faster.
Authored by:

Michael Guelker
Product Manager, Pneumatic Actuators
Festo USA
Hauppauge, N. Y.
Edited by Kenneth J. Korane


Key points:

42

Adjustable air cushion
Adjustable air cushions control
piston speed by throttling exhaust
air (red) through a needle valve.

• High machine speeds can lead to
damaging vibration and impact loads.
• Conventional pneumatic-cylinder
cushions prevent end-of-stroke
impacts, but require painstaking

adjustment.
• New self-adjusting air cushions adapt
to changing loads and operating
conditions.

Bye-bye blimps.
Willkommen Zeppelins
Goodyear Tire & Rubber Co. is
upgrading its fleet of blimps, turning
them in for larger, more-advanced
Zeppelins.

Resources:
Festo USA, www.festo.com/cms/en-us_
us/index.htm
RS# 622
ion via our
Request free informat
Web site at
Reader Service
esign.com/rsc
www.machined

64

mACHINe Design.com

Self-adjusting air cushions exhaust
compressed air through slots in the
cushion spud.

A common goal throughout the industrial world is to boost productivity
while reducing costs. Increasingly, this means cutting machine cycle times.
For pneumatic devices, this often requires running actuators as fast as possible without introducing excessive shock and vibration to products and
equipment.
To reduce an actuator‘s impact energy, engineers rely on two common types
of integrated cushioning — bumpers and air cushions. Flexible bumpers are
generally made of an elastomer incorporated into the piston or end cap. They
effectively reduce impact noise; however, they only absorb small amounts of
energy, limiting them to slow-speed, small-load, or short-stroke applications.
Operating with higher loads and speeds demands additional cushioning to
avoid damaging the cylinder and machine. Engineers generally use air cushions for end-of-stroke damping in these cases.
Unfortunately, these are not plug-and-play devices. Experienced maintenance technicians must adjust the air-cushion valves, and that depends on the
cylinder’s operating pressure, speed, and load. Subsequent changes to these
parameters means the air cushions need to be reset. Otherwise, the machine
may run slower or face unacceptable impact loads.
A new type of air cushion automatically adapts to changing conditions,
eliminating the headache of manual adjustments. It offers the potential to increase productivity and reduce maintenance costs.

Cushion basics
Air cushions are variable-orifice air dashpots. As the cylinder cycles, a spud
on either side of the piston closes a passage to the main piston chamber. This
traps air in the cylinder end cap and bleeds it off through a small port conSeptember 22, 2011

trolled by a needle valve. The cylinder traps a fixed volume
of air each cycle. But because air is compressible, the load,
velocity, and pressure in the cylinder all affect air-cushion
performance.
For any given set of conditions, there is generally only
a small window of needle-valve adjustments that provide

acceptable cushioning. Closing the needle valve too far results in high initial reaction forces, which slow the load too
quickly. It can also cause end-of-stroke bounce: the piston
oscillates as it decelerates, causing vibration and extending
cycle time.
Open the needle valve too far, however, and the trapped
air does not generate sufficient back pressure. The load
reaches the end of stroke too quickly and the piston hits the
end cap. And as mentioned above, once the needle valve
is properly set, any change in weight, pressure, or velocity affects cushion reaction and means the valve must be
readjusted.

Self-adjusting cushions
Recently developed self-adjusting cushions eliminate
the need for manual adjustment. In principle, they work
the same way as conventional cushions, except the cushioning air exhausts through notches in the cushioning piston, not past an adjustable needle valve.
The geometry of these notches is critical. LongitudiSeptember 22, 2011

64

off accidental fires
50 Heading
in solar arrays
Fighting a PV panel fire is hazardous
enough without having to stand in
water next to a 600-Vdc power source
that can’t be turned off.

56

pneumatics technology guide

guidelines for

SeleCting
CylindeRS
pneumatic cylinders come in thousands
of versions. here are some tips for
choosing the best one for the job.

Guidelines for
selecting cylinders
Pneumatic cylinders come in thousands
of versions. Here are some tips for
choosing the best one for the job.

Authored by:

Sheila Campbell
Product Manager - Actuators
Norgren Inc.
Littleton, Colo.
Edited by Kenneth J. Korane


Key points:

• Pneumatic cylinders come in many
basic versions.
• All cylinders can be tweaked to
better fit an application.

• Custom designs can perform better
and save money when standard
cylinders don’t fit the job.

64

Cylinder cushions
adapt on the fly

Resources:

Norgren Inc., www.norgren.com
RS# 621

Clean, compact,
durable, and fast-acting
air cylinders are workhorses on
packaging machinery.
56

Self-adjusting air cushions let machines
run smoother and faster.

mACHINe Design.com

ion via our
Request free informat
Web site at
Reader Service
esign.com/rsc

www.machined

September 22, 2011

56
Access our Reader Service
Web site to quickly find and
request information on the
products and services found
in the pages of MACHINE DESIGN.
www.machinedesign.com/rsc

2

MACHINE Design.com

SEPTEMBER 22, 2011

mACHINe Design.com

65


Directional
Control
• Solenoid valves
• Manifolds

Air Preparation
•

•
•
•
•

Filters
Regulators
Lubricators
Filter/regulator combos
Relief valves

Check around! You’ll see we’ve
got great prices on ALL the components
you need to complete a pneumatic
control system.

Stainless Steel
Pneumatic
Cylinders

CHECK OUT OUR PRICES ON VALVES and FRL

• Non-repairable
cylinders
• Position switches
• Compact round body
cylinders

AutomationDirect

Product Description

NITRA

MSC

McMaster-Carr

Grainger

Directional Solenoid Valve
5-port, 4-way, 2-position, 1/4” NPT,
24 VDC, single solenoid

$26.75
AVS-5312-24D

$84.81

$62.48

$93.80
3JCN6

Combination Filter/Regulator
1/4” NPT, gauge, mounting bracket

$29.00

$115.47

$74.80

$108.70

AFR-3233

84470475

42007401

6124K513

7390K17

4ZK92

All prices are U.S. published prices. Many other part numbers are available from all vendors. Items are closest equivalents; some minor differences may exist. Automationdirect prices are
from March 2011 Price List. MSC prices are from www.mscdirect.com 2/22/11. McMaster-Carr prices are from www.mcmaster.com 2/22/11. Grainger prices are from www.grainger.com 2/22/11.
Prices subject to change without notice.

Tubing and Hose
• Polyurethane or Nylon
12 tubing in popular colors
• Bonded polyurethane
straight or coiled tubing
• Polyurethane straight
and coiled hose with
fittings

CHECK OUT OUR PRICES ON CYLINDERS
AutomationDirect

Part Description

NITRA

MSC

McMaster-Carr

Grainger

Stainless Steel Air Cylinder
2 inch bore, 4 inch stroke, double acting,
pivot/double end mount

$53.25

$99.37

$73.93

$70.97

Stainless Steel Air Cylinder
3/4 inch bore, 1 inch stroke, single acting
spring return, nose mount

$11.25

$19.18

$15.35

$15.02

Stainless Steel Air Cylinder
1-1/16 inch bore, 6 inch stroke, double
acting, pivot/double end mount

$24.50
A17060DP

$48.20
36696847

$31.83
6498K658

$32.31
6W130

A32040DD

A12010SN

36697563

36696458

6498K478

6498K141

6D881

6W070

All prices are U.S. published prices. Many other part numbers are available from all vendors. Automationdirect prices are from March 2011 Price List. MSC prices are from www.mscdirect.com 2/22/11.
McMaster-Carr prices are from www.mcmaster.com 2/22/11. Grainger prices are from www.grainger.com 2/22/11. Prices subject to change without notice.

www.automationdirect.com/pneumatic-parts

Fittings
• Bulkhead, straight, tee,
elbow, Y, cross and
triple branch unions

Flow Control

www.automationdirect.com

• Manual hand valves,

Go online or call to get complete information,
request your free catalog, or place an order.

stop, check, meter-in,
meter-out and inline

RS# 103

1-800-633-0405


DEPARTMENTS

ON THE COVER
An LZ N07-101 Zepplin

8 EDITORIAL
Food for thought: The distance
between a field and your plate

10 EDITORIAL STAFF
12 LETTERS
18 SCANNING FOR IDEAS
Hybrid sweeper-scrubber goes green
Gas springs provide just the right force

22
32
38
40

REPORTER’S NOTEBOOK
LOOKING BACK
ADVANCED MANUFACTURING
BERKE ON SAFETY

Beware of unsafe guards

68 PNEUMATIC PRODUCTS
72 SOFTWARE PRODUCTS
74 PRODUCT SPOTLIGHT
Bearings & guides

76
88
90
93
94
94

PRODUCTS
BUSINESS INDEX
DATA FILES
AD INDEX
BUSINESS STAFF
BACKTALK

For customized article reprints and permissions
please contact: Penton Reprints, 1-888-858-8851,
e-mail at or visit
pentonreprints.com.
Editorial content is indexed in the Applied Science
Technology Index, the Engineering Index, SciSearch
and Research Alert. Microfilm copies available from
National Archive Publishing Company (NAPC), 300
N. Zeeb Rd., P.O. Box 998, Ann Arbor, MI 48106-0998,

Ph: 734-302-6500 or 800-420-NAPC (6272), extension
6578.
Permission to photocopy is granted for users
registered with the Copyright Clearance Center (CCC)
Inc. to photocopy any article, with the exception of
those for which separate ownership is indicated on
the first page of the article, provided that the base fee
of $1.25 per copy of the article, plus $.60 per page is
paid to CCC, 222 Rosewood Dr., Danvers, MA 01923
(Code No. 0024-9114/11 $1.25 + .60).
Subscription Policy: MACHINE DESIGN is circulated
to research, development, and design engineers
primarily engaged in the design and manufacture
of machinery, electrical/electronic equipment, and
mechanical equipment. To obtain a complimentary
subscription see our Web page at submag.com/sub/
mn. For change of address fill out a new qualification
form at submag.com/sub/mn.
Printed in U.S.A., Copyright © 2011. Penton Media, Inc.
All rights reserved. MACHINE DESIGN (ISSN 0024-9114) is
published semimonthly except for a single issue in
January and July by Penton Media, Inc., 9800 Metcalf
Ave., Overland Park, KS 66212.
Paid subscriptions include issues 1-21. Issue No. 22
(OEM Handbook and Supplier Directory) is available at
additional cost. Rates: U.S.: one year, $139; two years,
$199;. Canada: one year, $159; two years, $239; All other
countries: one year, $199; two years, $299. Cost for back
issues are U.S. $10.00 per copy plus tax, Canada $15.00
per issue plus tax, and Int’l $20.00 per issue. Product

Locator, $50.00 plus tax. Prepaid subscription: Penton
Media (MACHINE DESIGN), P.O. Box 2100, Skokie IL 600767800. Periodicals Postage Paid at Shawnee Mission,
Kans., and at additional mailing offices.
Can GST #R126431964. Canadian Post Publications
Mail Agreement No.40612608. Canada return address:
Bleuchip International, P.O. Box 25542, London, Ont.,
N6C 6B2.
Digital subscription rates: U.S.: one year, $69; two
years, $99;. Canada: one year, $79; two years, $119; All
other countries: one year, $99; two years, $149.
POSTMASTER: Send change of address notice to
Customer Service, MACHINE DESIGN, P.O. Box 2100, Skokie,
IL 60076-7800.

4

MACHINE Design.com

SEPTEMBER 22, 2011


g on, ak, en anp ec,
a
n, , U rten , B hi OD
o
o
i
L
,
t

n
r
P
i
p no
t ine ga nes , T I %
is ra
rs ni,
h
a
S
V
c
p
e
H
,
d
ild aria res , Tet Mas oup , Pa -Re ach Thee , Kro har -RV ro, K
t
r

t
M ,
ia
-S
M
ta
x
a

n, , An rme , T2 na G tama ass bia CFS rett son RSDF ecAs ls,
y Ce lma et as I, H lum al,
Be Hud RY pp ntro g
g
i
A
l
,
o
H
l ng , U ni,
M Co lob tel
 1 k, A Co cka
,

F
C
,
.
i
&
A
a
,
a
A
c
c
G
ll

ra
di
be s In on canic o, S gies Sys w, F B M O70 T-Pa ics & an P nol
n .M c
c olo ck
o B& LGH al, og eric ech a
l
g
e
i
e
t
B
G
s ,
a
,
n
L m k T lm
c nom F, U ech ie, P ik, 1 ppil H6 diSe ck,
A ogi , U m
a
,
B
e
n
T
c
n
r

o
a
P
r
g Te
M SS ust ech , St VWH f, M mp ake i, L Inc. cno
,
\ ol
,
t
n
d
e
B
P
e
E
rt
s
ms , PK HS, a In rde Ellio FD6 , W it Ch IG, aria sign s, T edat
K allin P Fö sti,  0H ging sv A , S n, M De tem a-R a
er
ev ak,
s ssi
d
B PE Ga RQ ka mo IM sig en
y
e
a
p

S
R
L
c
e
i
experience
a C
h ffe, De the
k I, Ha n, S,
ov adifference
LV and
S, of
P
r
e L one
tarthem
Y
ed DBe
L
D
P
n
s
p M
D
a
A Oy  8Q me ch, Bie and k,
n
, ofk, B

A
a
a
C
m
,
a
e
,

l
&
R
system
solutions!
p
d pa
o m
, LP xtr
s
A Uh
k ar G
P ,S
r
s
K
a
S
e
a

e
n
,
p
t
,
a
V
t
r
, Il lutio 9OD ier, E nchi Sys Build Tet roup teco ine, , Ila Oys ivis
,
o WUR err fra FT
x
G F, U ach , YK ns, , Un [
e
S
e
n
a
V
P
i
n
,
c  $ ia,
La me ach Cerm Aetn , MB ia M ctec lutio sim LHU (
F
s
,

l
a
c
PD Has ipol k, O n, M ing, ini, PKB umb n Pa c So o Vl 3HUU fran
r
l rte Pa str D
n S
d er,
V ac isio ell
a
o
n
L
L
C
sta vil,
o
a
P
v
n
b
T
A
a tem tec V o La . M , Ine ies, eeg man ac, +DVV poll, e, F
T
e, Sys Ray akr ac, G tma olog , Th uh Dim WDU l, Vi cm Mac
i
S s, B er,
V avi k, O n,

,
M
l
n
n
F
S
\
l
y
a
g
,
h
,
r
i
e
C
r
c
T
2
e
a
o
c
n
c
e

n
i
b
,

a
,
n
e
b
l

hin Visio , Al note S T oba Kro mon çHN sme m P c Vis o La M
c
a s
au t, Pa , ES s Gl tta, Thi  %OD , Ko yste yte akr , G.
e
b
r
I
,
a
c
e
n
nta hine tama KHS ckSy i Ber harp -RVH stro ral S ry, R n, M gna c, Si
e
a
A
,

io
s

a
e
c
e
ll
as , Ha ipak ie, P rate on- S SDF ppec , Gen chin Vis , Alb not S T
s YR
a ed str
F
s Ma res au , Pa , ES ck
A
d
c
l
,
i
,
u
o
n r M du low H 1R ck
a enb at HS Pa
r
t
t
g
,
n

n
n

a
n
F
i
m

e
rb ina I ik, 1B MA 0& , T-P & Co kag y, A chin asta ak, K trie, , 1B
ll hn &B O 7 eal ics Pac log as , H dip
us nik E
a
d
M
B ec l, B GH
o
S
a
g
di , Lo ican chn , T2 nic r Me a In tech sti,
rt ppi  6L
e
e
 f, M ck
er k Te lma cca rbe allin rder r Ga tro
rd to
H
a

l
m
S WHP o
i , U me Kö
p ,A
B Fö sta
,
g
As c
t
m
a
o
.
,
W
r
,
o
e
y
io 6\V g,
L
P
L
c
c
e
n
n

 gin it Ch , Pak ani, ns In Tec atro De , PE s, O ima vopa J
D
HF cka osv IG ari
ig ms, Red da, ADS tion er, D , No FND
S
M
a
te sia- , Re ak, olu nni MC H3D os
s
n
e P Ch
y
s nn lap c S mo , T
ig
P o, K
a
,
H
i
I
l
a
a
H
U
h
m
,
h
e

W
P
r
,
oc Bie
,P
MI Uhlm , YK ann rp, T , Sid U([ cAst Che
,
ec hm ha me UULH pe ch, ont
t
S ,
e
m, rs
a
c
n
,
r
a Bu n-S ste 3H Ap Ko
C c
p co chi
e Tet
P
u
d
l
o
,
,
,

y
e
n
i
o
D
i
a
Scan
QR
code
for
more
information
u ex, Gr
VL ack ch ics
ds a S inDAutomation
,O
Ut a M arte nes Perfection
V
k
u
,
n
P
F
c
c
a Hall / Booth
South

5111 o
H 104e www.br-automation.com
i
+ , T- nfra Log Pa fe,
U
erm etn , MB mb heeg , Kr AF, RS#
M
D
lu
n, \VW eal La k,
T
M
,A B
em ief
tta

More than 200 packaging
companies trust in B&R
controls.


What’s new online machinedesign.com
Product and supplier database
MACHINE DESIGN’s OEM Supplier Directory is the place to find manufacturers and
suppliers of products and services for the OEM. The Directory includes more
than 2,500 types of components and systems — everything from engineering
software to dc motors, needle bearings, nuts and bolts, and hydraulic cylinders.
Information is grouped by technology: CAD/CAM, electrical/electronic, fastening/
joining, fluid power, manufacturing processes, materials, and mechanical. It’s
intended to help design engineers make educated, informed purchasing and

specification decisions. Find it at .

Micro vehicle is tough as nails
At AUVSI Unmanned Systems 2011, QinetiQ debuted their latest micro
unmanned ground vehicle (MUGV) for military and first-responder
robotic missions. The Dragon Runner 10
weighs less than 10 lb — light enough to
throw through windows, into rooms, and
off rooftops. The DR 10 is built to withstand
harsh environments and gather data through
a multitude of interchangeable day and
night sensors, radios, cameras, and robotic
arms. Learn more at www.
engineeringtv.com/video/
Dragon-Runner-10-Easier-toThro.

New bearings catalog

EDITOR’S WEB PICKS

A new catalog from igus covers
plastic bushings, spherical bearings,
and linear bearings and guides. It
helps users select products by industry, application, or criteria such
as load, temperature, friction, and
wear. It also includes drawings and
a number of new products. Get it at
www.igus.com/quickorder.

RS# 105

6

MACHINE Design.com

SEPTEMBER 22, 2011

Enclosures en español

tion, electrical conductivity, thermal
management, EMC/EMI shielding,
and packaging for cushioning and
protection. View it at www.fabrico.
com/markets-applications-batteries.
htm.

Pumps and compressors
The new Thomas Global Catalog
has updated specs and performance data on hundreds of articulated piston, diaphragm, rotary,
and linear oilless air compressors/
vacuum pumps; and peristaltic, linear, and diaphragm liquid pumps.
Selection guides help users quickly
find the right product by technology and model. View or download a
copy at www.gd-thomas.com.

Pentair Technical Products,
Hoffman has a new Web site
( />offering a wide range of Spanishlanguage literature on engineered
enclosures. It includes a specifier’s
guide, product catalog, a white paper on global standards, renewable- Guide to inspection
energy brochure, and an interactive software

selection tool to calculate cooling
Delcam has an online guide relatrequirements based on thermal
ing new developments in its inspecload and enclosure size.
tion software. The site includes a
series of videos on capabilities, enVideo demystifies
hancements to GD&T functions, and
battery insulation
Fabrico’s new video looks at materi- how to speed analysis, efficiently
reuse measured data, and handle
als issues with lithium-ion, nickelcadmium, and other advanced bat- point-cloud data. View the site at
teries. It delves into electrical insula- www.delcam.tv/pi2011/lz.


15
500+
250 MILLION
SERVICE CENTERS

STOCKING DISTRIBUTORS

OF INVENTORY COAST TO COAST

Millions and Millions of Reasons.
One Connection.

Together, we can deliver more uptime, more product innovations and a greater bottom
line value. Connect with Parker for premier customer service and superior product
performance. We are your choice for pioneering products like Robust Port Stud™,
Compact Spiral™ and Trap Seal®. Parker also helps reduce equipment and machinery
downtime by increasing the speed and accuracy of acquiring replacements with our

exclusive PTS. For more information on our 250 million + reasons to choose Parker,
scan the QR code with your smart phone or visit www.parker.com/oneconnection

ENGINEERING YOUR SUCCESS.
www.parker.com 1 800 C-Parker
RS# 106


EDITORIAL
Food for thought:
The distance between a
field and your plate
The Pack Expo trade show is about to kick off and is notable because it caters to the
packaging industry. The packaging industry, in turn, largely revolves around the
packaging of food. So it might be appropriate to examine the recent trend toward
hand-wringing over “food miles.” The idea is that the longer food travels before it
hits your plate, the more energy dissipated and greenhouse gases generated.
At least according to popular mythology. The truth of the matter is that most
energy and greenhouse gases associated with food go into its production, not
its transportation. And that goes equally for food bought at the local farmers’
market as well as for that picked from grocery-store shelves.
The issue of food miles has been thoroughly investigated by two environmental engineers at Carnegie Mellon University in the U. S. and by the Dept. for
Environment, Food and Rural Affairs in the U. K. CMU researchers Christopher
Weber and H. Scott Matthews found that the food-production phase contributed
83% of the average U. S. household’s annual carbon footprint for food consumption. Transportation as a whole accounted for only 11% of greenhouse-gas emissions associated with food. And final delivery from producer to retail contributes
only 4% of that 11%.
It also emerges that transport by ship, rail, and air freight over long distances
is efficient compared with trucking food a comparatively short distance to its
final destination. The trucking phase is responsible for 71% of the total greenhouse gases generated while transporting food. Wholesaling and retailing operations accounted for just 5% of overall emissions.
CMU researchers as well found that globalization has increased the distance

food travels by around 25% since 1997. But this has boosted greenhouse-gas
emissions associated with transport by a mere 5%, simply because ocean shipping is far less energy intensive than overland trucking.
In the U. K., DEFRA examined the “food miles” question partly to see
whether a “buy-local” movement in that country made any sense. DEFRA uncovered percentages similar to those of the CMU research, and also discovered
that “buying local” could lead to more greenhouse-gas emissions rather than
less. The reason is that a lot of produce in the U. K. must be grown in greenhouses rather than in open fields. The energy debt of a greenhouse is a dealkiller, greenhouse gas-wise.
The situation isn’t much better for produce grown in U. K. fields that must
be put in cold storage until it is eventually consumed. U. K. residents generate
fewer greenhouse gases shipping fresh apples in from New Zealand than putting
British apples in a cooler. And when it comes to milk, U. K. dairy farmers use
twice as much energy to produce a metric ton of milk solids than New Zealand
farmers, says DEFRA.
The lesson from all this is that food should be grown where it is most economically virtuous to do so. And the packaging industry needn’t worry about
“buy-local” movements cutting into the need for its products.
— Leland Teschler, Editor

Congratulations to Don Schimizzi, J. Harboy, Rich Werth, Sasa
Pudar, and Bradley Miller. They each won a $100 American
Express gift card as top scorers for August in our World’s
Smartest Design Engineer contest. Challenge yourself
now at www.smartestdesignengineer.com and see if you
can top the scoreboard next month!
RS# 107

SEPTEMBER 22, 2011


Keep Your Machine Running!
Festo’s VTUB pneumatic manifold is not only
reliable, but is also very easy to maintain.

Simply mount valves with one single screw.
Designed for corrosion resistance, your machine
will be running longer and faster with the VTUB.

RS# 108

Global manufacturer of process control and factory automation solutions

For more information:
Call: 1-800-Go-Festo
1-800-463-3786
www.festo.com/us/vtub


OUR ANGLE IS…YOUR GEAR
SHIPPED IN 24 HOURS
OR IT’S
FREE.*

EDITORIAL STAFF

Leland E. Teschler, Editor,

MITRPAK right angle,
three-way, and counterrotating spiral bevel drives
are interchangeable with
Boston Gear, Hub City, Browning…
and we guarantee 24-hour shipment.

Kenneth J. Korane, Managing Editor,

SENIOR EDITORS
Leslie Gordon,
Stephen J. Mraz

For complete specifications and

AUTOMOTIVE &
NEWS FEATURES

CAD files, log onto www.mitrpak.com,

Stephen J. Mraz,


or call us at 800-648-7725. Learn
how MITRPAK minimizes backlash by

CAD/CAM

using locknuts, rather than conventional

Leslie Gordon,


spacers and rings.
* Contact us for details.

ELECTRICAL, ELECTRONICS

MITRPAK

Robert J. Repas, Jr.,


Power Transmission Products
38 River Road, Uxbridge, MA 01569
Tel: 508-278-2422 • Fax: 800-346-0018 • 800-648-7725
www.mitrpak.com

FASTENING, JOINING
RS# 109

Jessica Shapiro,


AC Motor Drives

Kenneth J. Korane,


Conveyors • Pumps • Packaging Machines • Ovens • Mixers
• Blowers • Fans • Door & Gate Openers • Treadmills

Leslie Gordon,

Kenneth J. Korane,

for OEM Applications

FLUID POWER

MANUFACTURING

MATERIALS
Jessica Shapiro,


MECHANICAL
Kenneth J. Korane,

Jessica Shapiro,


CONTRIBUTING EDITOR
Victoria Burt,
Chassis/IP-20, Nema 1/IP-40 and Nema 4X/IP65 models

EDITORIAL PRODUCTION

Provides Speed Control for:

Denise Greco,
Editorial Production Manager
Randall L. Rubenking, Art Director

AC Induction, Brushless DC & PSC Motors Subfractional thru 5 HP
115, 208/230, 400/460 VAC – 50/60 Hz 1Ø & 3Ø Input

* Rated 1.0 Amp output with non-isolated input, 1k qty

KB Electronics, Inc.

12095 N.W. 39th Street • Coral Springs, FL 33065-2516
954 346-4900 • Fax: 954 346-3377 • Outside FL 800 221-6570
www.kbelectronics.com • e-mail:

from

$55! *

“A Complete Line of Motor Drives”

1300 E. 9th St. Cleveland, OH 44114-1503
RS# 110
10

MACHINE Design.com

SEPTEMBER 22, 2011


We have the motion solutions.™
DŽŽŐŽŵƉŽŶĞŶƚƐ'ƌŽƵƉŚĂƐŝŶŶŽǀĂƟǀĞƐŽůƵƟŽŶƐĨŽƌLJŽƵƌŵŽƟŽŶŶĞĞĚƐ tĞĂƌĞĂǁŽƌůĚ
ůĞĂĚĞƌŝŶƐůŝƉƌŝŶŐƚĞĐŚŶŽůŽŐLJ ƐĞƌǀŽŵŽƚŽƌĂŶĚƌĞƐŽůǀĞƌĚĞƐŝŐŶĂŶĚĮďĞƌŽƉƟĐƌŽƚĂƌLJũŽŝŶƚƐ
ĨŽƌŚŝŐŚďĂŶĚǁŝĚƚŚĂƉƉůŝĐĂƟŽŶƐ
DŽĚĞůƐĂƌĞĂǀĂŝůĂďůĞŝŶŚŽƵƐĞĚ ƚŚƌŽƵŐŚͲďŽƌĞ ƉĂŶĐĂŬĞĂŶĚƐŝŶŐůĞŽƌŵƵůƟͲĐŚĂŶŶĞůĮďĞƌŽƉƟĐ
ĐŽŶĮŐƵƌĂƟŽŶƐ ^ƚĂŶĚĂƌĚ ŽīͲƚŚĞͲƐŚĞůĨĚĞƐŝŐŶƐĂƌĞƌĞĂĚLJĨŽƌƋƵŝĐŬĚĞůŝǀĞƌLJŽƌƉƌŽĚƵĐƚƐĐĂŶ
ďĞĐƵƐƚŽŵŝnjĞĚĨŽƌLJŽƵƌƵŶŝƋƵĞƉƌŽũĞĐƚƐ

ZĞůŝĂďŝůŝƚLJŝƐďƵŝůƚŝŶƚŽĞĂĐŚƉƌŽĚƵĐƚ džƚĞŶƐŝǀĞůŝĨĞƚĞƐƟŶŐŵĞĂŶƐŽƵƌƉƌŽĚƵĐƚƐ
ĂƌĞĚĞƐŝŐŶĞĚĂŶĚŵĂŶƵĨĂĐƚƵƌĞĚƚŽŽīĞƌůŽŶŐůŝĨĞ tŝƚŚŽǀĞƌϱϬLJĞĂƌƐŽĨ
ĞdžƉĞƌŝĞŶĐĞ ŽƵƌĞŶŐŝŶĞĞƌƐǁŽƌŬƚŽŐĞƚŚĞƌǁŝƚŚLJŽƵƌĚĞƐŝŐŶƚĞĂŵƚŽ
ƐĞůĞĐƚũƵƐƚƚŚĞƌŝŐŚƚŵĂƚĐŚ
Looking for more? Scan with your
smartphone to view our complete
product offering and specifications.
DŽƟŽŶdĞĐŚŶŽůŽŐLJ &ŝďĞƌKƉƟĐƐ ůĞĐƚƌŽŶŝĐ^LJƐƚĞŵƐ
нϭͲϱϰϬͲϱϱϮͲϯϬϭϭ ϬϬͲϯϯϲͲϮϭϭϮ;h^ͿŵĐŐΛŵŽŽŐ ĐŽŵ

www.moog.com/components
RS# 111

Aerospace Products:
9 ^ůŝƉZŝŶŐƐ
9dŽƌƋƵĞDŽƚŽƌƐ
9

ĐƚƵĂƚŽƌƐ
9 ZĞƐŽůǀĞƌƐ
9 &ŝďĞƌKƉƟĐZŽƚĂƌLJ:ŽŝŶƚƐ
9 ƵŝůĚͲdŽͲWƌŝŶƚ^ŽůƵƟŽŶƐ


LETTERS
Details, details, details

The recent article on hardness
testing was interesting and useful (“Getting Help from Hardness Testing,” July 7). It provides
technical information on various

types of hardness, one of the important mechanical properties of
materials in general, especially
for metal cutting.
But there are a few discrepancies:
• The definition of “ANSI” 4130
steel is incorrect. ANSI is an
acronym for the American National Standards Institute. Correct definition of this grade of
steel is AISI/ASTM 4130 (AISI
stands for American Iron and
Steel Institute, and ASTM stands
for American Society for Testing
and Materials).
• The description of the steel heat
treatment that increases hardness left out the critical fact that
for annealing, the rate of furnace
cooling (so many degrees per

hour) and the final cooled temperature should be provided.
Otherwise, the tensile and yield
strengths of a given grade of
steel cannot be verified.
• The information on Brinell hardness did not mention the standard ball and standard loads for
a Brinell hardness tester. The balls
should be 10.0 mm in diameter
and made of hardened steel and
tungsten carbide. Balls that aren’t

10 mm should meet ASTM E 10 requirements. The test uses loads of
500, 1,000, 1,500, 2,000, 2,500, and
3,000 kgf. And the 500-kgf load is

for testing relatively soft metals
such as copper and aluminum alloys. The 3,000-kgf load is mainly
used to test steels and cast irons.
• The article left out the range of
the most accurate readings (the
minimum and the maximum values) for Brinell and Rockwell (HRB

RS# 112


Produce smart phones faster
with high speed bearings

Ever wonder how producers of extremely advanced
consumer electronics, like smart phones, manage to
keep launching new generations of these products
at such a ferocious tempo with consistently high
quality?
SKF product manager Satyen Bohidar and SKF’s
sales team have part of the answer – SKF-SNFA
high-speed super precision bearings. They allow
the machine tools used for manufacturing key
components of these products to run flawlessly
and precisely at up to 60.000 rpm 365 days
a year.
The result? Smart products are brought to
the market even faster. It’s another great example
of knowledge engineering at work. Find out more
at www.skf.com/poke

The Power of Knowledge Engineering

Milling spindle running
at 40.000 rpm

SKF-SNFA high-speed
bearings

Satyen Bohidar,
SKF Product Manager

RS# 113


LETTERS
and HRC) hardness numbers.
• The information in the table
“Sample hardness ranges for
metals” is inaccurate. A tungstencarbide ball indenter lets you
measure the hardness of heattreated steels up to a maximum
of 627 HB. If the Rockwell hardness is 105 HRB, scale C should
be used because numbers higher
than 100 are inaccurate. If hardness is less than 20 HRC, scale B
should be used for the same reason, i.e., hardness numbers of 19
HRC and lower are inaccurate.
Edmund Isakov

Nail remover update
The Sept. 23 issue from last year featured a nail-pulling gun in the Inventor’s Corner column. It asked readers
to suggest names for the soon-to-bepatented invention. Here are some of

the letters we received, as well as an
update from the inventor.

Nailout, or Nail-out?
Trevor Rowe
How about the “Nail Biter.”
LeRoy Henkel
My son and I read the article about
the pneumatic nail remover. My
13-year-old son, Wyatt, suggests
“NailOut.” He enjoys building with
wood but he says removing nails is
too much work.
H. Hopkins
The name “Nail Ripper” would
make the tool sound robust, which
I think is what you need to encourage sales.
Ted Brydges
I’m partial to the Anti Nail Gun name.
Dan Brenton
Name it the DeNailer, or simply
Pneumatic Nail Puller.
Gary Partsman

I recently filed the patent to cover
this invention in the U. S. and Canada. And we chose a name from the
several hundred suggestions we received mostly due to the magazine
article, the “Nail Shark.”
The response I got from the article was really inspiring. I had e-mail
from a great number of companies

ready to buy several right away. It
turns out there is a whole industry
that does nothing but take apart old
buildings to recycle the wood. They
do it mostly by hand. A gentleman I
corresponded with from Habitat for
Humanity said that they routinely
buy and tear down old houses, and
if they could more economically take
them apart, it would save them millions every year.
The first-round prototype built
over this past year pulled out big and
small nails and even a few dry wall
screws. The second version is just
about ready to be prototyped.
I have estimated that there may

Cable entries made easy

Roxtec EzEntry™ – seals for cabinets and enclosures

Multidiameter™ by Roxtec







No more cutting off connectors

Easy to install
Adapts to cable dimensions
Area efficient
Available in several sizes
Fewer knockouts

 Complete light-weight kits
 Seals multiple pre-terminated

cables in one opening
 Protects against water, dust

and vibration

RS# 114
MACHINE Design.com

SEPTEMBER 22, 2011

800 520 4769, 918 254 9872
918 254 2544
EMAIL , www.roxtec.com
PHONE

www.roxtec.com/ezentry

14

Sealed to UL/NEMA and IP ratings

FAX


MODULAR POWER
IS NO LONGER
A PIPE DREAM.
Installs as fast as it delivers. powerfast™ takes the rigidity out of wiring for
power. TURCK’s modular cordset power distribution system saves up to 40% of
labor, time and contractor installation costs. Not only is it easier to install, it’s
easily scalable and changeable. Made-to-length, quick connect IP67, IP68 and
IP69K molded cordsets are available in four connector sizes rated up to 30
amps. Plus receptacles, tees, reducers and cable drops, to deliver power as you
need to motors, drives, sensors and a host of electrical devices.

NFPA 79
compliant

Made in North America and in stock for immediate availability.
1-800-544-7769 www.turck.us
RS# 115

SENSORS | NET WORKS/FIELDBUS | RFID | CONNECTIVITY | INTRINSIC SAFETY
©2011 TURCK Inc. NFPA is a trademark of the National Fire Protection Agency.


LETTERS
be a demand for 250,000 or more in
the first few years. There are between
1 and 2 million carpenters in the U. S.

and Canada, and nearly every one
I have spoken with said they would
buy one of these the first chance they
get.— Jake Kittell

A better way to learn FEA
I wholeheartedly concur with the
thrust of the recent FE Update column (“Surface Contact 101: Block
and Ramp with Friction,” July 7).
However, I think the example chosen was way too difficult for novice FEA users. During the 1980s,
I was a structural loads engineer
working on the Space Shuttle at
Rockwell. The company developed a course for training new users on FEA that contained a series
of problems, each progressively
more difficult than the previous
one, that could be solved by hand.
You could then model and solve
them using FEA.

Zero backlash

In place of the example shown
in this article, I would suggest a
two-step approach. First, solve a
truss that is statically determinate
by hand. Then solve it by FEA. Then
solve a truss that is not statically
determinate (i.e., something that
involves additional relationships
like Castigliano) before you solve

it by FEA. After modeling and solving several simple problems such
as this, you can progress to something more difficult such as modeling nonlinear behavior in FEA.
Warren Merriman

350 psi of vacuum?
In an article on vacuum forming
(“Vacuum-Formed Plastics Fool
Filmgoers,” July 7), it said the technicians “apply about 350 psi of
vacuum.“ This doesn’t really make
sense. Maybe someone meant
pressure?
John Matthews

Good catch. There’s about 350 lb of air
pressure over the area of the sheet. The
process applies a vacuum of about 25
in.-Hg. — Jessica Shapiro

Some serious sarcasm
I have been carefully reading all the
articles associated with electric vehicles (EVs). There is a way to extend
the range of EVs that is so obvious
I do not understand how everyone
is missing it. All EVs should be designed with motors for propulsion on
two wheels and alternators on two
wheels to generate electricity. Ergo,
we will greatly extend the range of
EVs and save a lot of ergs.
I feel sure that when this proposal
is turned into law by our Congress,

sales of EVs will soar. Having solved
this problem, Congress can then address major other issues such as repealing some of those annoying laws
of physics and letting us buy incandescent bulbs.
Jeff Scanlon

Put some teeth

in your motion control
Accuracy to ±30 μm
(±0.0018")
Unlimited run lengths

Speed up to
36 ft. per sec.
(11 m/sec)
Low-friction,
low noise

± 5 μm (±0.0002")
repeatability

RPS tackles your toughest motion applications.
The innovative, new Precision Roller Pinion System (RPS)
from Nexen handles your most demanding linear motion
control applications. Simply put, no other motion system
offers the combination of speed, positional accuracy, stroke
length, load capacity and zero backlash performance. Not to
mention it’s also extremely quiet, 99% efficient, and so
refined it can run without lubrication. Replace inferior rack
and pinion, ball screw and belt drive technologies with

higher performance and lower maintenance solution.

Learn more at www.nexengroup.com
Call 800.843.7445
RS# 116


IT’S MOTION
CONTROL VERSUS
MOTHER NATURE
ON CENTRE COURT.
©2010 Moog. All rights reserved.

WHEN IT COMES TO HIGH PERFORMANCE MOTION CONTROL, MOOG EXPERTS ARE THERE.
When design engineers sought the best way to control the new retractable roof at Wimbledon’s famed Centre Court, they turned
to Moog. The result was an innovative all-electric installation that provides 148 axes of control via high performance electric
actuators, servo motors, servo drives, closed-loop controls and software. Now, more than 1,100 metric tons (1,212 tons) of steel
and 5,200 square meters (17,060 square feet) of fabric move swiftly and safely to prevent rain delays.
Moog’s combination of motion control expertise and world-class solutions
can make the difference for you too—no matter what industry you’re in.
For more information call 866-580-7610.

How can we improve your machine design?
View our Wimbledon video at />
WHAT MOVES YOUR WORLD

RS# 117
moog.com/industrial

SCANNING FOR IDEAS
Edited by Stephen J. Mraz

Hybrid sweeper-scrubber goes green
The CS7000 sweeper-scrubber from Nilfisk-Advance, Plymouth, Minn. (www.
advance-us.com), can use a variety of hybrid drives — LP gas/electric or diesel/
electric — for power. There’s also an all-electric version. And it uses electric motors
to eliminate most of the hydraulics commonly used on traditional ride-on cleaning
equipment.
The hybrid version uses liquid propane or a diesel engine to drive a high-capacity
ac-brushless alternator which is hooked to a 36-V battery pack. The batteries’
primary purposes are to provide supplemental peak load sharing
and to keep the machine working for a short time in case
the engine fails. The 36-V power drives the ac motors for steering and propulsion, while
dc motors propel the sweepers and scrubbers. All
Polymer body
the motors
panels won’t
dent or corrode,
or damage
surroundings

Three-stage
vacuum motor

Filter with
variablefrequency
shaker

Heavygauge steel

unibody
frame

75-gallon
corrosionproof
recovery tank

7-cu-ft drysweeper debris
hopper

Dust suppression
(optional)

r
are IP55 wash-down rated. Engine speed adjusts to deliver all the power needed to
formation via ou
Request free in Web site at
support various machine operating modes. The hybrid machines use 50% less fuel
Reader Service
c
design.com/rs
and emit fewer CO2 emissions.
ww w.machine
The all-electric version, dubbed 3Power, uses the same electric drives and delivers
5.4 hr of run time on a single charge, which is about 65% more run time than competing electric cleaners. It relies on conventional lead-acid batteries.
The vehicles use a cylindrical sweeper with a separate disc scrubber. This lets the
cleaner sweep and scrub in one pass without putting cleaning soluWANT MORE?
tion into the debris hopper, keeping swept up debris dry. An optional
Focus on this code image
dust-suppression feature reduces airborne dust by 85% compared to

using your smartphone and
motorized side brooms. And a nanofiber filter resists clogging.
free software from www.
neoreader.com, and you will be
The cleaner-scrubber can be used for industrial buildings such as
connected to related content
warehouses, factories, and shipping facilities, and in outside areas such
on machinedesign.com.
as park grounds and parking lots.
/>RS# 401

18

MACHINE Design.com

SEPTEMBER 22, 2011


NB’s Ultra Precise Slide Guides
Easily Pass Your ‘Multiple Choices’ Test

You have so many choices within each guide class
– the NB standards, unique guides.
s  LUBRICANT SYSTEMS WITH LUBRICANT OPTIONS
s 1UICK DELIVERY FROM 53 INVENTORY
s 2EMARKABLE INTERCHANGEABILITY
s -YRIAD MIX AND MATCH STYLES
s MM TO MM RAIL WIDTHS
s %XTENDED BLOCK OPTIONS
s #HOICE OF COATING

Fiber sheet lubricant
delivery makes guides
easier to maintain.*

s  SEAL OPTIONS

Four ball circuits for
more load and accuracy.

(YHU\FRPSRQHQWLV
PDQXIDFWXUHGLQ
RXU,62
IDFWRU\LQ-DSDQ
1RRQHEHDWVRXU
TXDOLW\

Precision ground raceways provide
smoother ball movement.
Guide shown is from the SGL family
within the NB Slide Guide product line.

Hanover Park, IL 60133
Fax: (630) 295-8881
1-800-521-2045

San Jose, CA 95131
Fax: (408) 435 1850
1-888-562-4175

www.nbcorporation.com

RS# 118

*Optional fiber sheet
shown installed.

Ramsey, NJ 07446
Fax: 201-236-5112
1-800-981-8190


SCANNING FOR IDEAS

Gas springs provide just the right force
Cylinder filled
with highpressure
nitrogen

Metering
orifice for
defined
extension
velocities
Steel body

Several
mounting
options
available,
including
stud thread,

angle ball
joint, clevis
fork, and
swivel eye.

Oil-zone
filling for
end position
damping,
and
lubrication

Grease
chamber
Treated steel
rod

Self-contained and maintenance-free gas springs from Ace Controls Inc.,
Farmington Hills, Mich. (www.acecontrols.com), provide a range of forces to
provide controlled motion for lids, hoods, doors, panels, and machine guards.
They are available in sizes from 15 to 28 mm in diameter with forces from 10 to
2,500 N. They all have steel piston rods and cylinders, and grease chambers for
low break-away forces. They work in any orientation, although mounting with
the rod down is preferred. An internal valve lets the users adjust the force to an
application’s requirement. When operating in hot temperatures, it is important
to note that for every increase of 18°F (or 10°C), spring force increases by 3.4%.
RS# 402

New! Contrinex Series 4050 photoelectric sensors
with highly effective background suppression

Operating distance is independent of target
color, shape or surface structure
• Long operating distance of 500 mm, with a setting range
from 20 to 500 mm
• Distance set by a 3-turn potentiometer with position indication
• Rugged, small PBTP housing suitable for rough environments
• Red light beam considerably simplifies alignment
• Switching frequency of 500 Hz
• Outstanding optical characteristics provide a virtually negligible
blind zone (< 1 mm at s = 300 mm)
Contrinex Inc.
Old Saybrook, CT 06475
Toll free: (866) 289-2899

Fax: (860) 388-3574
E-mail:
www.contrinex.com

Visit our Design Site at www.contrinex.com

20

MACHINE Design.com

SEPTEMBER 22, 2011

RS# 119

The Series 4050 features a
rugged 40 x 50 x 15 mm PBTP

housing suitable for rough
environments


RS# 120


REPORTER’S NOTEBOOK
Molded panel lets solar-powered
trash compactor catch rays
The design of a solarpowered trash compactor for city streets used
several plastic-molding
issues to make it practical.
The original compactor made by BigBelly
Solar in Needham, Mass.,
worked well but was
costly to manufacture.
The Mack Molding Co.
in Arlington, Vt., worked
with BigBelly to address
the cost problems.
To shield the solar
panel from the elements,
Mack injection molds a
clear cover from highOnce the trash compactor senses it is full, it sends a wireless
message to a central server so a work crew can empty the bins.
impact, UV-resistant
polycarbonate resin on a
1,000-ton press. The large
part must be perfectly

clear to expose the solar panel below
to the sun. The 27.75 × 20.39 × 4.39-in.
part is molded with just one gate to
avoid knit lines that would interfere
with sunlight hitting the solar cells.
Mack also compression-molds side
panels and a hopper cover from thermoplastic olefin that has been 100%
recycled from car bumpers. Wall thicknesses vary and the side walls are thinner than the main wall. The molding
gate was located on the thinner side
wall so that it is invisible after assembly.
Mack conducted mold-flow analysis,
as well as experiments with tooling, to
set cycle time, temperature, and injection pressure. It finalized a mold that
would give technicians more
Mack fabricates the back panel and door out
Resources:
control over the process. The
of metal. The unit can be custom painted,
BigBelly Solar, (781) 444-6002,
tool design was also critical
silk-screened with logos or other artwork, or
www.bigbellysolar.com
RS# 406
in terms of the location and
vinyl wrapped with custom artwork.
Mack Molding Co., (802) 375-0349,
direction of water lines. EngiThe point of equipping these trash rewww.mack.com
RS# 407
neers were able to downsize
ceptacles with solar power is to let service

For a video of the solar-powered
the tool by using a hot runner
personnel make fewer stops to empty its
trash compactor in action
bar, which lets the part run
32-gallon bin. The solar cells charge a bat(shot sideways, unfortunately):
in a smaller press with better
tery which provides all the power needed to
/>economics.
periodically compact trash. Thus, the recepwatch?v=eDFX1I0e3kg
The trash bin in the comtacle can sit anywhere because it needn’t
pactor is rotomolded of lowTrash compactor… continued on page 27
density polyethylene resin.
22

MACHINE Design.com

SEPTEMBER 22, 2011


Barbecue sauce and wine give up on glass
Clear plastic bottles are nothing
new in food and beverage packaging, but they are now being used
in markets where products were
traditionally tied to glass. Many
companies are choosing bottles
made of polyethylene terephthalate (PET) because they are as clear
as glass and less likely to break.
And customers see the bottles as a
greener alternative to glass.

The wine market is one that has
been slow to adopt new forms of
packaging. Many consumers still
believe wine should be packaged in
traditional 750-mL glass bottles with
foil-covered corks. Nonetheless,
boxed wines and single-serve bottles are becoming more common.
This is especially true in venues like parks, concerts, sporting
events, and airplanes. In these
areas, broken glass can be a significant hazard, so vendors and
beverage companies have looked
to plastic.
Fetzer, Hopland, Calif.,
Cecchetti Wine Co., Sonoma,
Calif., and Sutter
Home, St. Helena,
Calif., are among
the companies that
have converted
single-serve 187-mL
wine bottles from
glass to lightweight
PET from Amcor
Rigid Plastics,
Melbourne,

Resources:

Australia. The bottles preserve the
look of the original glass containers and can be run through existing filling lines with minor adjustments.

FDA-approved silicon-oxide
coatings developed by KHS Plasmax GmbH, Hamburg, Germany,
seal the containers from the inside
to keep contents from oxidizing
and give PET-bottled wine the
same shelf life as wines bottled in
glass. The film is less than 100-nm
thick and removes easily during
Converting singlerecycling.
serve 187-mL wine
Eliminating the potential for
bottles from glass
bottles to break during shipping is
to PET makes the
a major cost savings. Another adcontainers more
vantage is the lighter weight — PET
convenient for
containers weigh 1/6th that of glass
consumers, who
can use them
bottles with the same volume —
wherever broken
which saves transportation costs
glass is a hazard.
and cuts fuel consumption.
They also save
Sutter holds 38% of the singlebreakage and fuel
serve market, which is expected
costs in shipping
to amount to 2.2 million cases this

and are more easily
recycled than glass. year. Fetzer is the tenth largest
winery in the U. S. and a leading
provider of copacking services.

Amcor Rigid Plastics, www.amcor.com
Cecchetti Wine Co., www.cecchettiwineco.com
Fetzer, www.fetzer.com
KHS Plasmax GmbH, www.khsplasmax.com
Mrs. Griffin’s Barbecue Sauce, www.
griffinsbbq.com
Sutter Home, www.sutterhome.com

And Cecchetti supplies Redtree
wines to Air Canada, British Airways, and Continental Airlines,
and is exploring retail distribution
of 1-L PET-packaged wines in the
Midwest.
Another consumer product
moving to PET containers from
glass is barbecue sauce. Mrs.
Griffin’s Barbecue Sauce, Macon,
Ga., has been a well-established
brand in the southeastern U. S.
since 1935. It recently converted
its 12-oz ring-neck and 32-oz
decanter-style glass bottles to PET
packages from Amcor and uses its
existing filling lines.
Mrs. Griffin’s president and CEO

SEPTEMBER 22, 2011

PET… continued on page 27
MACHINE Design.com

23