37S06T0 rear wheel drive automatic transmission repair 2004

automatic
transmission

rear-wheel drive
automatic transmission
repair
student reference book

COURSE CODE: 37S06T0
ORDER NUMBER: FCS-13883-REF
September 2, 2004

Ford Customer Service Division
Technical Training


Course 37S06T0, Slide 1


Course 37S06T0, Slide 2

Appropriate service methods and proper repair procedures are essential for the
safe, reliable operation of all motor vehicles, as well as the personal safety of the
individual doing the work.
This document provides general directions for accomplishing service and repair
work with tested, effective techniques. Following them will help assure reliability.
There are numerous variations in procedures, techniques, tools, and parts for
servicing vehicles, as well as in the skill of the individual doing the work. This
document cannot possibly anticipate all such variations and provide advice or
cautions as to each. Accordingly, anyone who departs from instructions provided in
this document must first establish that he compromises neither his personal safety

nor the vehicle integrity by his choice of methods, tools or parts.
As you read through the shop manual procedures, you will come across NOTES,
CAUTIONS, and WARNINGS. Each one is there for a specific purpose. NOTES
give you added information that will help you to complete a particular procedure.
CAUTIONS are given to prevent you from making an error that could damage the


vehicle. WARNINGS remind you to be especially careful in those areas where
carelessness can cause personal injury. The following list contains some general
WARNINGS that you should follow when you work on a vehicle.
Always wear safety glasses for eye protection.
Use safety stands whenever a procedure requires you to be under the vehicle.
Be sure that the ignition switch is always in the OFF position, unless otherwise
required by the procedure.
Set the parking brake when working on the vehicle. If you have an automatic
transmission, set it in PARK unless instructed otherwise for a specific service
operation. Operate the engine only in a well-ventilated area to avoid the danger of
carbon monoxide.
Keep yourself and your clothing away from moving part when the engine is running,
especially the fan and belts.
To prevent serious burns, avoid contact with hot metal parts such as the radiator,
exhaust manifold, tail pipe, catalytic converter and muffler.
Do not smoke while working on the vehicle.
To avoid injury, always remove rings, watches, loose hanging jewelry, and loose
clothing before beginning to work on a vehicle. Tie long hair securely behind your
head.
Keep hands and other objects clear of the radiator fan blades. Electric cooling fans
can start to operate at any time by an increase in under hood temperatures, even
though the ignition is in the OFF position. Therefore, care should be taken to ensure
that the electric cooling fan is completely disconnected when working under the

hood.


Course 37S06T0, Slide 3


Course 37S06T0, Slide 4

The Automatic Transmission Curriculum consists of 8 courses addressing automatic
transmission theory of operation, diagnosis, and service. Each course in the
curriculum is a “building block” for the next course in the curriculum.
This curriculum is designed for technicians who want to learn the methods and
techniques to properly diagnose and service automatic transmission systems and
components. The skills and knowledge gained from this curriculum will enable
technicians to pursue training in other service specialty areas.
The Automatic Transmission Update course is a Web-based Training (WBT) course
designed as an ongoing source of information on new transmissions/transaxles.
The course is required for currently certified technicians. New technicians do not
have to take it.
Currently this course addresses the TorqShift transmission. Future versions of the
course will cover new content.


All technicians will be required to take future versions of the Automatic Transmission
Update course to remain certified.
Technicians will be notified of need to take the course by electronic field
communication. When technicians take the course, it sets the time clock for when
they have to take the next update course.

Course 37S06T0, Slide 5

The Automatic Transmission Curriculum consists of 8 courses addressing automatic
transmission theory of operation, diagnosis, and service. Each course in the
curriculum is a “building block” for the next course in the curriculum.
This curriculum is designed for technicians who want to learn the methods and
techniques to properly diagnose and service automatic transmission systems and
components. The skills and knowledge gained from this curriculum will enable
technicians to pursue training in other service specialty areas.


Course 37S06T0, Slide 6


Course 37S06T0, Slide 7


Course 37S06T0, Slide 8


Course 37S06T0, Slide 9


Course 37S06T0, Slide 10


Course 37S06T0, Slide 11


Course 37S06T0, Slide 12

Course 37S06T0, Slide 13


Course 37S06T0, Slide 14


Course 37S06T0, Slide 15


Course 37S06T0, Slide 16


Course 37S06T0, Slide 17


Course 37S06T0, Slide 18


Course 37S06T0, Slide 19


Course 37S06T0, Slide 20


Course 37S06T0, Slide 21


Course 37S06T0, Slide 22