BILL OF QUANTITIES FORM
PROJECT TITLE : __________________________
LOCATION
: __________________________
ITEM
NO.
1
ITEM DESCRIPTION
QUANTITY
UNIT
LIGHTING OUTLETS
Supply ,install, connect and
unit
369
test lighting outlets including
conduits, conduit fittings,
boxes, wiring, cabling,
earthing, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for :
Lighting outlets controlled by
one/two way switch using
copper wire (3x2.5 sqmm) in
20 mm pvc conduit.
1
LIGHTING FIXTURES
Supply, installing, connecting,
unit
144
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for :
Recessed ceiling or suspended
ceiling luminaries with
hand-blown opal glass, satin
matt and metal fitter.
Cable entries for throughwiring
Compact fluorescent lamps 1
TC-TELI · 26 W
mod. 8779 GLASHUTTE
LIMBURG
Subtotal
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
2
3
ITEM DESCRIPTION
UNIT
LIGHTING FIXTURES
Supply, installing, connecting,
Unit
46
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
Recessed ceiling or suspended
ceiling luminaries with handblown opal glass, satin matt
and metal fitter.
Cable entries for throughwiring
Compact fluorescent lamps 1
TC-TELI · 26 W mod. 7981
GLASHUTTE LIMBURG
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
Ceiling luminaries for
direct and indirect light
made of white satin matt
glass and metal fitter.
Compact fluorescent lamps
2 T16R · 55 + 60 W
mod. 8460 GLASHUTTE
LIMBURG
Subtotal
QUANTITY
20
Unit
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
ITEM DESCRIPTION
QUANTITY
UNIT
LIGHTING FIXTURES
4
5
Subtotal
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
Ceiling luminaries for direct
and indirect light made of
white satin matt glass and
metal fitter.
Compact fluorescent lamps 2
T16R · 55 + 22 W
mod. 8459 GLASHUTTE
LIMBURG
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
Ceiling luminaries for direct
and indirect light made of
white satin matt glass and
metal fitter.
Compact fluorescent lamps 2
T16R · 55 + 60 W
mod. 8868 brand
GLASHUTTE LIMBURG
38
Unit
30
Unit
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
ITEM DESCRIPTION
QUANTITY
UNIT
LIGHTING FIXTURES
6
7
Subtotal
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
Pendant luminaries with
crystal glass, partially satin
matt, for free-radiating and
uniform light
Compact fluorescent lamps 1
TC-TELI · 26 W
Mod. 5276 brand
GLASHUTTE LIMBURG
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for:
false ceiling recessed
luminaries with light diffuser,
protection IP44 minimum,
fluo lamp 2x35W
Cable entries for throughwiring - Groung floor kitchen
brand iGuzzini mod. action
6609-6806
4
Unit
26
Number
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
ITEM DESCRIPTION
QUANTITY
UNIT
LIGHTING FIXTURES
8
9
10
Subtotal
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for
pending mounted luminaries
with light diffuser, protection
IP44 minimum, fluo lamp
2x49W
Cable entries for throughwiring - First Floor kitchen
brand iGuzzini mod. action
6609-6808
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for
Emergency wall light
Supply, installing, connecting,
and testing of lighting fixtures
including lamps, all mounting
brackets, starters, ballast,
capacitor & accessories,
fittings, wires, and all
necessary works for proper
operation in accordance with
design drawings, and
electrical specifications for
Mini inverter for fluorescent
lamps from 6W to 65W
34
Number
27
Number
34
Number
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
1
2
3
4
Subtotal
ITEM DESCRIPTION
QUANTITY
UNIT
SWITCHING DEVICES
Supply, install, connect and
39
Number
test of lighting switches
Including all ancillary works
and materials required for
complete installation as
specified and as indicated on
the drawings. ONE WAY
ONE GANG LIGHTING
SWITCH - 10 AMP.
Supply, install, connect and
Number
23
test of lighting switches
Including all ancillary works
and materials required for
complete installation as
specified and as indicated on
the drawings TWO WAY
ONE GANG LIGHTING
SWITCH - 10 AMP.
Supply, install, connect and
2
Number
test of lighting switches
Including all ancillary works
and materials required for
complete installation as
specified and as indicated on
the drawings THROUGH
OVER LIGHTING SWITCH
- 10 AMP.
Supply, install, connect and
31
Number
test of lighting switches
Including all ancillary works
and materials required for
complete installation as
specified and as indicated on
the drawings BUTTON
SWITCH FOR IMPULSE
RELAY LIGHTING
CONTROL - 10 AMP.
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
1
2
3
Subtotal
ITEM DESCRIPTION
QUANTITY
UNIT
SOCKETS OUTLET
Supply , install and test socket
Number
143
outlet with copper cables
inside P.V.C pipe for both
exposed or embedded
installation the price shall
include wire or cables and all
required accessories boxes
,fittings and material to
complete the work form panel
to outlet and according to
specifications and drawings.
Outlet for single phase single
socket 16 A with wires
(3x4)mm2 inside 23 mm pipes
Supply , install and test socket
outlet with copper cables
inside P.V.C pipe for both
exposed or embedded
installation the price shall
include wire or cables and all
required accessories boxes
,fittings and material to
complete the work form panel
to outlet and according to
specifications and drawings.
Outlet for single phase power
socket 32 A with wires
(3x6)mm2 inside 23 mm pipes
Supply , install and test socket
outlet with copper cables
inside P.V.C pipe for both
exposed or embedded
installation the price shall
include wire or cables and all
required accessories boxes
,fittings and material to
complete the work form panel
to outlet and according to
specifications and drawings.
outlet for three phases switch
32A industrial socket with
wires (4x6)+6mm2
59
Number
54
Number
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
1
2
3
1
2
3
4
5
6
7
8
9
ITEM DESCRIPTION
Supply , install and test socket
of different rating complete
with all required accessories
according to specifications
and as follows three phases
switch 32A industrial socket
IP 55
Supply , install and test socket
of different rating complete
with all required accessories
according to specifications
and as follows single phase
single socket 16A industrial
socket IP55
Supply , install and test socket
of different rating complete
with all required accessories
according to specifications
and as follows single phase
single socket 16 A
UNIT
Sockets
54
Number
54
Number
89
Number
DISTRIBUTION BOARD
DB-3 NEW
Number
1
DB-A
Number
1
DB-B
Number
1
Number
DB-C
1
Number
DB3-D
1
DB3-BAR-GF
Number
1
Number
DB3-E
1
Number
DB3-BAR-FF
1
PB : protection panel board
Number
54
for kitchen industrial sockets
Subtotal
QUANTITY
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
1
2
3
UNIT
PRICE
WIRES AND CABLES (low tension cables)
Supply , install and test
20
ML
ITEM DESCRIPTION
multicore copper cables
0.6/1.2 KV , PVC/pvc to be
installed in pipes, cable trays
or ducts the price shall include
termination , connection and
identifications, connection to
transformer , diesel generator
and panels complete with all
required accessories and
fittings according to
specifications (section 16120)
and drawings.
CABLE(4x10)CU,
PVC/PVC+10E
Supply , install and test
multicore copper cables
0.6/1.2 KV , PVC/pvc to be
installed in pipes, cable trays
or ducts the price shall include
termination , connection and
identifications, connection to
transformer , diesel generator
and panels complete with all
required accessories and
fittings according to
specifications (section 16120)
and drawings.
CABLE(4x25)CU,
PVC/PVC+16E
Supply , install and test
multicore copper cables
0.6/1.2 KV , PVC/pvc to be
installed in pipes, cable trays
or ducts the price shall include
termination , connection and
identifications, connection to
transformer , diesel generator
and panels complete with all
required accessories and
fittings according to
specifications (section 16120)
and drawings. CABLE
(3x50+25) CU,
PVC/PVC+25E
Subtotal
QUANTITY
UNIT
30
ML
20
ML
TOTAL
PRICE
ITEM
NO.
4
5
1
2
3
Subtotal
UNIT
PRICE
WIRES AND CABLES (low tension cables)
Supply , install and test
ML
40
ITEM DESCRIPTION
QUANTITY
UNIT
multicore copper cables
0.6/1.2 KV , PVC/pvc to be
installed in pipes, cable trays
or ducts the price shall include
termination , connection and
identifications, connection to
transformer , diesel generator
and panels complete with all
required accessories and
fittings according to
specifications (section 16120)
and drawings. CABLE
(3x70+35) CU,
PVC/PVC+35E
Supply , install and test
multicore copper cables
0.6/1.2 KV , PVC/pvc to be
installed in pipes, cable trays
or ducts the price shall include
termination , connection and
identifications, connection to
transformer , diesel generator
and panels complete with all
required accessories and
fittings according to
specifications (section 16120)
and drawings. CABLE
(3x120+70) CU,
PVC/PVC+70E
10
ML
TELEPHONE SYSTEM AND DATA SYSTEM
Number
18
Supply, install & test
telephone outlet including
conduits, cables 2(2x0.6) mm2
copper, boxes &all other
accessories to put the system
in a good operation to serve
all building, according to
specification drawings.
Supply, install & test
telephone socket RJ11,
complete according to
specification drawings.
Supply, install & test data
(computer) point including
cables (UTP CAT (6)),
conduits, pull boxes and all
accessories from the data
outlet to the patch panel, as
specified
18
Number
9
Number
TOTAL
PRICE
ITEM
NO.
4
5
1
2
3
Subtotal
ITEM DESCRIPTION
QUANTITY
UNIT
Supply and install data socket
RJ 45.
Phone/data and security
system rack
9
Number
1
Number
FIRE DETECTION AND ALARM
Supply ,install, connect and
Number
1
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :-Wiring,
tubes and junction boxes AND
connect to (CCTV system)
(intrusion detection system)
Supply ,install, connect and
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :-Fire
alarm/smoke detection
Control Panel
Supply ,install, connect and
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :-Optical
smoke detector
1
Number
45
Number
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
4
5
6
1
2
3
4
5
Subtotal
ITEM DESCRIPTION
QUANTITY
UNIT
FIRE DETECTION AND ALARM
Supply ,install, connect and
Number
17
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :-Fixed
temperature heat detector
Supply ,install, connect and
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :-Manual
break glass unit
Supply ,install, connect and
test fire alarm components
wiring, including conduits,
conduit fittings, boxes, wires,
cabling, accessories and all
necessary works and materials
required for complete
installation back to panel
boards as specified and as
indicated on the drawings for
the following items :Audio/visual fire alarm
11
Number
12
Number
Surveillance system
control unit for intrusion
Number
1
detection system with phone
dialer
Monitor TV LCD da 19", TFT
camera for CCTV system type
dome, swinging pointing,
multifocal lens, output in
coaxial cable RG59 TYPE indoor mounting
CCTV case for outdoor
mounting
magnetic contact detector for
opening door
1
9
cad
cad
4
cad
6
cad
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
6
7
ITEM DESCRIPTION
QUANTITY
Surveillance system
CCTV wire type RG59 - 75
95
Ohm/100m - Capacità 60pF/m
- all foilder
volumetric detector with
double control system
(infrared and microwave)
13
GRAND TOTAL
______________________________________
Contractors authorized signature over printed name
UNIT
m
Number
UNIT
PRICE
TOTAL
PRICE
BILL OF QUANTITIES FORM
PROJECT TITLE : __________________________
LOCATION
: __________________________
ITEM
NO.
1
2
3
4
5
1
2
3
Subtotal
ITEM DESCRIPTION
QUANTITY
UNIT
SANITARY FIXTURES
Flush tank water closet
Number
17
(E.W.C), complete with tank,
seat, cover, all accessories,
built in dush spray and valves
as per drawings, and
specifications.
Counter lavatory basin
complete with lavatory mixer,
all accessories, and valves &
fitting as per drawings, and
specifications.
Kitchen sink complete with
mixer, all accessories,
valves& fitting as per
drawings, and
specifications.
Solar water heater complete
with all accessories, valves
as per drawings, and
specifications.
16
Number
20
Number
1
L.S
Floor drain with 50 mm
35
Number
diameter outlet and stainless
steel cover as drawings
&specifications.
DOMESTIC WATER SYSTEM
Polypropylene water pipes
m
“PN 20"and all fitting,
accessories to complete all
domestic water network as
drawings &specification
100 mm diameter
Polypropylene water pipes
20
m
“PN 20"and all fitting,
accessories to complete all
domestic water network as
drawings &specification
32 mm diameter
Polypropylene water pipes
75
m
“PN 20"and all fitting,
accessories to complete all
domestic water network as
drawings &specification
25 mm diameter
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
4
1
2
3
4
5
ITEM DESCRIPTION
QUANTITY
Supply and install dry
1
inspection chamber of size 80
×120 contains water meter and
gate valves in cabinets as
specified and shown on
drawings complete with
valves supports ,etc
DRAINAGE SYSTEM
All embedded drainage pipes
outside the building should be
U. P.V.C 6 bar complete with
all fitting &accessories as
drawings & specification.
Embedded pipes with
160 mm diameter
All embedded drainage pipes
40
outside the building should be
U. P.V.C 6 bar complete with
all fitting &accessories as
drawings & specification.
Embedded pipes with
110 mm diameter
All drainage & ventilation
80
pipes suspended on wall or
ceiling or at ducts should be
P.V.C 6 bar complete with all
fitting, accessories& caps for
each stack as drawings &
specifications.
Suspended pipes with
110 mm diameter
All drainage & ventilation
25
pipes suspended on wall or
ceiling or at ducts should be
P.V.C 6 bar complete with all
fitting, accessories& caps for
each stack as drawings &
specifications.
Suspended pipes with
50 mm diameter
Inspection chamber (I.C) , in
brick walls 0.25 m, for depth
up to 1.00 m, and 0.38m for
more than 1.00 m depth
double cast-iron cover of
weight 125 Kg.
0.60x0.60m
GRAND TOTAL
UNIT
Number
Number
Number
Number
Number
Number
UNIT
PRICE
TOTAL
PRICE
•
The cost of any sanitary fixture should includes install and supply all fittings,
accessories, valves, drainage, domestic cold &hot water pipes inside toilets kitchen.
All cold & hot water pipes shall be poly Propylene (PP) pipes PN (20) . All drainage
pipes shall be UPVC pipes as per specifications.
GENERAL:
The works mentioned herein shall include but not limited to: supply, install completing
with necessary accessories, testing and commissioning of all items according to the
applicable specifications, codes, environmental conditions, manufacture's
recommendations and as shown on the project drawings. Related civil and mechanical
works which is necessary to complete the installation is the responsibility of the
contractor. Full detailed shop drawings should be prepared and approved from the owner
prior to the installation. For site works the items include but not limited excavation in all
types of soil to the required levels, water dry out if required, filling up with original soil
if it is good or other suitable soil, return all things to its original case and taking off all
wastes from the site to the nearest place according to the advice of the supervisor
engineer
______________________________________
Contractors authorized signature over printed name
BILL OF QUANTITIES FORM
PROJECT TITLE : __________________________
LOCATION
: __________________________
2
3
Subtotal
QUANTITY
UNIT
2
Lump
sum
2
Lump
sum
Demolishing the required staircases
using the suitable tools to execute the
works (don't use heavy hammers).
Concrete only to be demolished,
leaving the steel bars fixed as it is; also
don't demolish any of the staircase
surrounding beams. Item includes
repairing the damage resulting from the
demolishing works. Item also includes
getting rid of all unneeded resulted
demolished materials in the public
waste sites otherwise the contractor
will be charged for any governmental
penalties.
Reconstruction of reinforced concrete
stairs, needed foundations, shear walls
according to the new design.
Item includes all requirements and
preparation for executing the works ,
also includes preparations and
modifications needed in the
surrounded beams according to the
construction drawings, making holes
for implanting steel bars using the
suitable chemical materials is included
in price.
Supply and installation of granite tiles
for the previous mentioned stair light
colors like beige are suggested, if not
available black color is suggested with
width 1.2 m., thicknesses of tiles (4 cm
for runs, 2 cm for risers) skirt with
thickness of 2cm and 12 cm height,
treads should be done on the external
end of the runs and nose chamfering.
Granite Sample should be approved by
the consultants. Item includes all
requirements for executing and
completing the work.
supply
1
ITEM DESCRIPTION
50.4
m.l.
50.4
m.l.
installation
ITEM
NO.
UNIT
PRICE
TOTAL
PRICE
5
6
7
8
Subtotal
Alternative item:
Supply and constructing brick masonry
handrail for the stair cases mentioned
in item no. (2) According to the
construction drawings with height of
1m. and with 0.12 m. thickness . Item
includes all requirements for executing
and completing the work.
Supply and construction of new
reinforced concrete stairs, needed
foundations, shear walls at the
classrooms corridor ends according to
the new design. Item includes all
requirements, materials and
preparation for executing and
completing the works.
Supply and installation of granite tiles
for the previous mentioned stair light
colors like beige are suggested, if not
available black color is suggested with
width 2.00 m., thicknesses of tiles (4
cm for runs, 2 cm for risers) skirt with
thickness of 2cm and 12 cm height,
treads should be done on the external
end of the runs and nose chamfering.
Granite Sample should be approved by
the consultants. Item includes all
requirements for executing and
completing the work.
UNIT
supply
installation
Alternative item:
Supply and installation of FILETTO
HASANA for the previous mentioned
stair with width 1.2 m. thicknesses of
tiles (4 cm for runs, 2 cm for risers)
skirt with thickness 2cm and 12 cm
height ,treads should be done on the
external end of the runs and nose
chamfering. Marble Sample should be
approved by the consultants.
Item includes all requirements for
executing and completing the work.
Supply and constructing reinforced
concrete handrail for the stair cases
mentioned in item no. (2) According to
the construction drawings with height
of 1m. and with 0.10 m. thickness .
Item includes all requirements for
executing and completing the work.
QUANTITY
50.4
m.l.
50.4
m.l.
14.3
m.l.
14.3
m.l.
2
Lump
sum
supply
4
ITEM DESCRIPTION
installation
ITEM
NO.
82
m.l.
82
m.l.
UNIT
PRICE
TOTAL
PRICE
10
11
12
13
Subtotal
Alternative item:
Supply and installation of FILETTO
HASNA for the previous mentioned
stair with width 2.00 m. thicknesses of
tiles (4 cm for runs, 2 cm for risers)
skirt with thickness 2cm and 12 cm
height ,treads should be done on the
external end of the runs and nose
chamfering. Marble Sample should be
approved by the consultants. Item
includes all requirements for executing
and completing the work.
Supply and constructing reinforced
concrete handrail for the stair cases
mentioned in item no. (7) According to
the construction drawings with height
of 1m. and with 0.20 m. thickness .
Item includes all requirements for
executing and completing the work.
Alternative item:
Supply and constructing brick masonry
handrail for the stair cases mentioned
in item no. (7) According to the
construction drawings with height of
1m. and with 0.20 m. thickness . Item
includes all requirements for executing
and completing the work.
Demolishing of the required brick
walls with thickness 12 -20 cm.
Item includes repairing the damage
resulting from the demolishing works.
Item also includes getting rid of all
unneeded demolished materials in the
public waste sites, otherwise the
contractor will be charged for any
governmental penalties.
Demolishing in the reinforced concrete
slab to make the required holes for the
needed ducts according to the
architectural drawings. Item includes
repairing the damage resulting from the
demolishing works. Item also includes
getting rid of all unneeded demolished
materials in the public waste sites.
Contractor will be charged for any
governmental penalties.
QUANTITY
UNIT
supply
9
ITEM DESCRIPTION
installation
ITEM
NO.
82
m.l.
82
m.l.
20.8
m.l.
20.8
m.l.
526.2
m2
12
Lump
sum
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
14
15
16
17
18
Subtotal
ITEM DESCRIPTION
Demolishing of the required brick
walls with thickness 21 -60 cm.
Item includes repairing the damage
resulting from the demolishing works.
Item also includes getting rid of all
unneeded demolished materials in the
public waste sites.
Contractor will be charged for any
governmental penalties.
Supply and installation of light cement
brick walls or other corresponding type
according to the required design.
Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
Price only:
Supply and installation of light cement
brick walls or other corresponding type
according to the required design.
Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
Scraping the required existing
plastering for walls or ceilings, and the
mortar beneath it until reaching the
brick clear surface or the concrete slab.
Item includes repairing the damage
resulting from the scraping works. Item
also includes getting rid of all
unneeded scarped materials in the
public waste sites. Contractor will be
charged for any governmental
penalties.
* Undefined quantity will be defined
on site, according to requirements
Scraping the required existing ceramic
tiles for walls and the mortar beneath it
until reaching the brick clear surface.
Item includes repairing the damage
resulting from the scraping works. Item
also includes getting rid of all
unneeded scarped materials in the
public waste sites.
Contractor will be charged for any
governmental penalties.
QUANTITY
UNIT
5.6
m3
1078.6
m2
m3
2500
m2
343.4
m2
UNIT
PRICE
TOTAL
PRICE
21
22
23
24
25
Subtotal
Supply and painting of 3 coats of latex
paint for ceilings including all the
preparatory steps before painting final
coats. Sample and color should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Supply and painting of 3 coats of
plastic paint for walls including all the
preparatory steps before painting final
coats. Sample and color should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Alternative item:
Supply and painting of 3 coats of oil
paint for walls including all the
preparatory steps before painting final
coats. Sample and color should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Alternative item:
Supply and painting of 3 coats of
lacquer paint (matt or shiny) for walls
and ceilings including all the
preparatory steps before painting final
coats. Sample and color should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Supply and installation of vertical
curved ceramic tiles as a junction unit
between two sides of ceramic walls.
Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
620.5
m2
supply
UNIT
Installation
20
Supply and installation of cement
plastering for the new walls and the
scraped wall surfaces according to the
required design.
Supply and installation of local
ceramic tiles for walls according to the
required design.
Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
QUANTITY
1679.5
m2
1679.5
m2
3607.85
m2
3865
m2
3865
m2
3865
m2
supply
19
ITEM DESCRIPTION
Installatio
n
ITEM
NO.
138.6
m.l.
138.6
m.l.
UNIT
PRICE
TOTAL
PRICE
ITEM
NO.
ITEM DESCRIPTION
26
Supply and installation of PVC
rounded edges as a vertical junction
unit between two sides of ceramic
walls; color should be matched with
ceramic tiles color. Sample should be
approved. Item includes all
requirements for executing the work
and complete finishes.
27
Supply and installation of stainless
steel angle edges (5 X 5 cm) with
length of 2m and thickness of 1.5 mm
as a vertical unit cover to protect
ceramic edges .Sample should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Demolishing the required ceramic or
marble floors including its skirts if
exist. Item includes repairing the
damage resulting from the demolishing
works. Item also includes getting rid of
all unneeded demolished materials and
the filling sand beneath the demolished
tiles in the public waste sites.
Contractor will be charged for any
governmental penalties.
28
29
30
Subtotal
QUANTITY
UNIT
170
m.l.
106
m.l.
1420.5
m2
1047.6
m2
558
m2
Smoothing and polishing the existing
expired mosaic tiles of the classrooms
and the corridor floors, Item includes
dismantling of the expired tiles and
replace them by new similar one
(around 20% of the given total area).
Item also includes grouting with the
suitable white cement mortar. Sample
of new tiles should be approved. Item
includes all requirements for executing
the work and complete finishes.
Supply and installation of bitumen
water proofing layer (insoumat) for
kitchens and bathrooms. Item includes
covering with two layers lied on two
opposite direction to each other ,
considering skirts of minimum 25
cm.Item includes all requirements for
executing the work and complete
finishes.
*engineering measurement will be on
the horizontal plan of the space
UNIT
PRICE
TOTAL
PRICE
34
35
Subtotal
Supply and installation of granite skirts
with 12 cm height and thickness 2 cm
for classrooms, teacher’s room and
corridors. Item includes chamfering the
upper edge of the skirt .Sample should
be approved. Item includes all
requirements for executing the work
and complete finishes.
Alternative item:
Supply and installation of local marble
skirts with 12 cm height and thickness
2 cm for classrooms, teacher’s room
and corridors. Item includes
chamfering the upper edge of the skirt
.Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
supply
Installation
supply
Installation
supply
Installation
Supply and installation of local
ceramic tiles for bathrooms floors
according to the required design.
Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
UNIT
862.5
m2
862.5
m2
348.3
m2
348.3
m2
286.15
m2
286.15
m2
747
m2
747
m2
747
m2
747
m2
supply
33
Supply and installation of local
ceramic tiles for kitchens floors
(Nonskid ceramic tiles 20x20 cm)
according to the required design.
Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
installation
32
Supply and installation of local
ceramic tiles for restaurants &
surrounding corridors floors according
to the required design.
Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
QUANTITY
supply
31
ITEM DESCRIPTION
installation
ITEM
NO.
UNIT
PRICE
TOTAL
PRICE
39
40
Subtotal
Alternative item:
Supply and installation of marble skirts
with 12 cm height and thickness 2 cm
for the restaurants. Item includes
chamfering the upper edge of the skirt.
Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
Price only:
Supply and installation of local marble
tiles with thickness of 2 cm for floors.
Item includes grouting with the
suitable white cement mortar,
smoothing and polishing the whole
areas. Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
supply
installation
supply
installation
supply
installation
Alternative item:
Supply and installation of granite skirts
with 12 cm height and thickness 2 cm
for the restaurants. Item includes
chamfering the upper edge of the skirt.
Sample should be approved. Item
includes all requirements for executing
the work and complete finishes.
supply
38
Supply and installation of regular
ceramic skirts for the restaurants.
Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
installation
37
Alternative item:
Supply and installation of regular
ceramic skirts for classrooms, teacher’s
room and corridors. Sample should be
approved. Item includes all
requirements for executing the work
and complete finishes.
QUANTITY
supply
36
ITEM DESCRIPTION
installation
ITEM
NO.
UNIT
747
m2
747
m2
116.26
m.l.
116.26
m.l.
116.26
m.l.
116.26
m.l.
116.26
m.l.
116.26
m.l.
m2
m2
UNIT
PRICE
TOTAL
PRICE
42
43
44
45
Subtotal
Price only:
Supply and installation of granite tiles
with thickness of 2 cm for floors.
Item includes grouting with the
suitable white cement mortar,
smoothing and polishing the whole
areas. Sample should be approved.
Item includes all requirements for
executing the work and complete
finishes.
Supply and installation of new flush
oak veneers wooden door with new
suitable wooden frame, price includes
dismantling of the existing wooden
doors and supplying and installing new
knops, hinges and all needed
accessories. item also includes lustring
and fixing stainless steel U- section
shape on the bottom of the door leaf .
Item includes all requirements for
executing the work and complete
finishes.
Alternative item:
Dismantling the existing wooden
doors, removing the old paints,
smoothing and repaint with the
required paint. Price includes wood
repairing and changing all needed
accessories re-installing again.
Sample of all accessories should be
approved. Item includes all
requirements for executing the work
and complete finishes.
Alternative item:
Cladding both sides of the existing
wooden doors with oak veneers. Item
includes modifying the existing door
frames to fit the new door thickness.
Price includes supply and installation
of new knops, hinges and all needed
accessories, also includes polishing and
all requirements for executing the work
and complete finishes.
Sample of all accessories should be
approved.
Supply and installation of suspended
gypsum board fall ceiling in the
restaurant of the ground floor
according to the new design.
QUANTITY
supply
41
ITEM DESCRIPTION
UNIT
m2
installation
ITEM
NO.
m2
28
no.
28
no.
28
no.
103
m2
UNIT
PRICE
TOTAL
PRICE