Steamer (Dim Sum)
FSE-1-N2-GET
Steamer with removable rice roll tray (for reference)
FSE-2-N2-GET
37.4”
37.4”
70.9”
70.9”
Ø20.5”
41.3”
31.9”
Optional Accessories of Steamer : Removable rice roll tray
17.3”
20.5”
Remark
23”
5.3”
6.9”
6.9”
31.9”
41.3”
17.7”
Ø20.5”
17.7”
Ø20.5”
41.3”
FSE-1-N2-GET
Specifications of Steamer (Dim Sum)
Standard Accessories of Steamer
(1 set for Single Steamer & 2 sets for Double Steamer)
4.7”
Elevation
Steam container supporter
Plan
20.5”
Handle
2.8”
Mesh
Elevation
FSE-2-N2-GET
Width x Depth x Height (inch)
37.4 x 41.3 x (31.9 + 17.7)
70.9 x 41.3 x (31.9 + 17.7)
Width x Depth x Height (mm)
950 x 1050 x (810+450)
1800 x 1050 x (810+450)
Solenoid
17”
Plan
Elevation
Rice Pan
3.5”
24”
Plan
7-hole plate
Fuel suit for:
FSE-1-N2-GET
Dimensions
Steam container cover
4.5”
Plan
Double Steamer
Model
Elevation
Handle
Steam container
Single Steamer
20.5”
20.5”
Plan
ġġ
8”
Loading (kW) Voltage (V/Ph/Hz)
0.0154 (110~120/1/50~60) or (220~240/1/50~60)
Heat input kW (BTU / hr.)
Town Gas
45 (153546)
2 x 45 (153546)
Propane (L.P. Gas)
45 (153546)
2 x 45 (153546)
Natural Gas
45 (153546)
2 x 45 (153546)
Operating Pressure (inch in Water Column)
Town Gas, Natural Gas, Propane (L.P. Gas)
(must specify gas type before ordering).
If any of these units will be installed in area with hard water
supply, water softener shall be installed before water inlet of the
unit to avoid any damages may occur to the heating chamber.
Daily cleaning & water drain from heat exchange chamber
after daily use.
Town Gas
6
6
Propane (L.P. Gas)
11
11
Natural Gas
7
7
Fuel pipe connection (inch)
Town Gas
Ø1
2 x Ø1
Propane (L.P. Gas)
Ø1
2 x Ø1
Natural Gas
Ø1
2 x Ø1
Ø0.5 / Ø1.5
Ø0.5 / Ø1.5
172 / 272
342 / 502
Water inlet / Drainage pipe (inch)
Water inlet / Drain
Net / Gross Wt. (kgs)
- 5 -
POF-ETL-04-2010-V1