Datasheet - FO - Cable - Patch Cord & Pigtails - ALL

FIBER OPTIC SOLUTION
Optical
fibers with
connectors
Direction of propagation
ferrule front face
Optical
fiber
Ferrule
Reflections
Physical Contact (PC)
Angled Physical Contact (APC)
MM connections
On MM connectors which are used almost exclusively in
inhouse applications, reflections have no great influence on
transmission quality. For this reason, MM connectors polishing
are offered only with PC-MM.
Optical fiber cables with connectors
KRONE makes to order cable connections for single mode (SM) and multimode applications (MM) with
optical connectors from our production and from other internationally leading manufacturers. Our range
consists of a great variety of cable versions and lengths and connector types. All cables are halogen free and
according to IEC 332-3C and IEC 332-1.
SM connections
The SM connector ferrules are offered with different types of polishing. Losses and reflections which can
occur in the connection depend to a large degree on the form and the surface quality of the ferrule face.
This in turn has a decisive influence on the signal transmission quality, especially in the case of high-rate
digital as well as analogue transmission.
The following ferrule polishing types are characterised:
■ PC polishing (Physical Contact) :
The convex form of the end surfaces ensures that there is no gap between the fiber ends and thus hardly
any reflection. The ferrule end surfaces are pressed against each other, when connected inside the adapter,

so that the opposing fibers come into direct physical contact.
Minimum return loss is 40 dB (SM fibers).
■ UPC polishing (Ultra Physical Contact) :
In the case of UPC polishing, further polishing on the end surface achieves a minimum return loss of 50 dB
(SM fibers).
Just available for SC and FC.
■ APC polishing (Angled Physical Contact) :
Further improvement of the return loss can be achieved by angled polishing technology. The convex end
surfaces of the plug pins are polished at an angle of 8°or 9° to the fiber axis. The resulting reflections are
therefore led out of the fiber core, independent of whether the connection has been established (fiber-fiber
transmission ) .
Minimum return loss is 60 dB (SM cables).
PATCHCORDS AND PIGTAILS
S
FC
DIN
E2000
SC-SM
Applications:
- optical fiber networks
for telecommunication
applications
- LAN, inhouse networks
(Datacom)
- measuring technology
- cable TV
Applications:
- optical fiber networks
- for telecommunication
- applications

- LAN, inhouse networks
- (Datacom)
- measuring technology
- cable TV
Applications:
- optical fiber networks
- for telecommunication
- applications
- LAN, inhouse networks
- (Datacom)
- measuring technology
- cable TV
Applications:
- optical fiber networks
- for telecommunication
- applications
- LAN, inhouse networks
- (Datacom)
- measuring technology
- cable TV
■
can be mounted in rows, giving high
packing density
■
for SM fibers (9/125 µm)
■
cable versions:
buffered fiber (ø 0.9 mm)
cable (ø 3 mm)
duplex cable (2 x ø 3 mm)

■
due to push-pull locking mechanism
easy-to-use with high tensile strength
■
types of polishing : PC, UPC, APC8°,
APC 9°
■
colour coding:
PC, UPC: blue housing
APC: green housing
■
plastic connector housing with ceramic
ferrule
■
plastic adapter housing with ceramic
sleeve, mounted using two M2 screws
or snap-in connection
■
conforms to IEC 874-14, CECC 86260
and FTZ TL 6060-3016
■
compatible to NTT standard
■
for SM fibers (9/125 µm)

optional: MM fibers (50/125

and 62.5/125 µm)
■
cable versions:

buffered fiber (ø 0.9 mm)

cable (ø 3 mm)

duplex cable (2 x ø 3 mm)
■
thread coupling
■
types of polishing :

for SM fibers: PC, UPC, APC8°,

for MM fibers: PC
■
colour coding:

PC, UPC: black bend protection

APC: green bend protection
■
brass connector housing (nickel plated)

with ceramic ferrule
■
brass adapter housing (nickel plated)

with ceramic sleeve, on SF version

mounted using 2 M2 screws or on RF

version using union nut
■
meets IEC 874-7 and CECC 86115-802
■
compact design
■
for SM fibers (9/125 µm)

optional: MM fibers (50/125

and 62.5/125 µm)
■
cable versions:

buffered fiber (ø 0.9 mm)

cable (ø 3 mm)

duplex cable (2 x ø 3 mm)
■
thread coupling
■
types of polishing :

for SM fibers: PC, APC8°,

for MM fibers: PC
■
colour coding:

PC, UPC: black bend protection

APC: green bend protection
■
brass connector housing (nickel plated)

with ceramic ferrule
■
brass adapter housing (nickel plated)

with ceramic sleeve, mounted using 2



union nuts
■
meets DIN 47256, CECC 86135-801 and

FTZ TL 6060-3001, part 1 to 7
■
can be mounted in rows, giving high
packing density
■
integrated dust and laser protection
■
mechanical or colour coding (optional)
■
for SM fibers (9/125 µm)
optional: MM fibers (50/125

and 62.5/125 µm)
■
cable versions:
buffered fiber (ø 0.9 mm)
cable (ø 3 mm)
duplex cable (2 x ø 3 mm)
■
due to push-pull locking easy-to-use
■
types of polishing : PC, APC8°,
■
colour coding:
PC, UPC: blue housing
APC: green housing
■
plastic connector housing with ceramic
ferrule
■
plastic adapter housing with ceramic
sleeve, mounted using
– two M2 screws or metal clip, or
– integrated plastic clip (= compact
adapter
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ return loss: PC polishing:>40 dB
UPC polishing:>50 dB
APC8°polishing:>60 dB
APC9°polishing:>55 dB
■ service life:1000 cycles (PC, APC)

■ tensile strength:100 N (cable)
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ return loss: PC polishing :>40 dB
APC polishing :>60 dB
■ service life:1000 cycles
■ tensile strength:100 N (cable)
■ meets CECC 86275-801 and -802 and
FTZ TL 6060-3015
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ return loss: PC polishing :>40 dB
APC polishing :>60 dB
■ service life:1000 cycles
■ tensile strength:100 N (cable)
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ return loss: PC polishing :>40 dB
UPC polishing :>50 dB
APC polishing :>60 dB
■ service life:1000 cycles (PC, APC)
■ tensile strength:100 N (cable)
Ordering examples
FC/PC patchcord, SM, 3 mm cable
length 3 m 7006 1 222-23
length 5 m 7006 1 222-25
length 10 m 7006 1 222-27
FC/PC pigtail, SM, 0.9 mm buffered fibre
length 3 m 7006 1 120-23
length 5 m 7006 1 120-25

FC/PC Adapter (SF), also for UPC polishing
Qty 1 pc 6824 2 300-04
FC/PC Adapter (RF), also for UPC polishing
Qty 1 pc 6824 2 300-12
FC/APC Adapter (SF)
Qty 1 pc 6824 2 300-06
Ordering examples
DIN/APC8° patchcord, SM, 3 mm cable
length 3 m 7006 1 233-23
length 5 m 7006 1 233-25
length 10 m 7006 1 233-27
DIN/APC8° pigtail, SM, 0.9 mm buffered fiber
length 3 m 7006 1 130-23
length 5 m 7006 1 130-25
DIN adapter for PC and APC polishing
Qty 1 pc 6824 2 300-16
Ordering examples
E2000/PC patchcord, SM, 3 mm cable
length 3 m 7006 1 244-23
length 5 m 7006 1 244-25
length 10 m 7006 1 244-27
E2000/PC pigtail, SM, 0.9 mm buffered fibre
length 3 m 7006 1 140-23
length 5 m 7006 1 140-25
E2000/PC Adapter (incl. screws and clip)
Qty 1 pc 6824 2 300-18
E2000/APC Adapter (incl. screws and clip)
Qty 1 pc 6824 2 300-20
E2000/PC Adapter (compact)
Qty 1 pc 6824 2 300-33

E2000/APC Adapter (compact)
Qty 1 pc 6824 2 300-31
Ordering example
SC/APC8° patchcord, SM, 3 mm cable
length 3 m 7006 1 211-33 7006 1 211-23
length 5 m 7006 1 211-35 7006 1 211-25
length 10 M7006 1 211-37 7006 1 211-27
SC/APC8° pigtail, SM, 0.9 mm buffered fibre
length 3 m 7006 1 110-33 7006 1 110-33
length 5 m 7006 1 110-35 7006 1 110-35
SC/PC Adapter, also for UPC polishing
Qty 1 pc 6824 2 300-00
SC/APC Adapter
Qty 1 pc 6824 2 300-02
Ordering examples
ST/PC patchcord, 3 mm cable
MM (50/125) MM (62.5/125)
length
2 m 7006 2 255-12 7006 3 255-12
length
5 m 7006 2 255-15 7006 3 255-15
ST/PC pigtail, 900µm buffered fibre
MM (50/125) MM (62.5/125)
length
3 m 7006 2 150-13 7006 3 150-13
length
5 m 7006 2 150-15 7006 3 150-15
ST adapter
Qty 1 pc 6824 2 300-08
Ordering examples

SC-MM patchcord, 3 mm cable
MM (50/125) MM (62.5/125)
length 2 m 7006 2 211-12 7006 3 211-12
length 5 m 7006 2 211-15 7006 3 211-15
SC-MM pigtail, 900µm buffered fibre
MM (50/125) MM (62.5/125)
length 3 m 7006 2 110-13 7006 3 110-13
length 5 m 7006 2 110-15 7006 3 110-15
SC-MM Adapter (ceramic)
Qty 1 pc 6824 2 213-00
SC-MM Adapter (phosphor bronze)
Qty 1 pc 6824 2 215-00
SC-MM
SC-Duplex
MT-RJ
ST
Applications:
- LAN, inhouse networks
- (Datacom)
- computer peripherals
Applications:
- LAN, inhouse networks
- (Datacom)
- computer peripherals
Applications:
- LAN, inhouse networks
- (Datacom)

Applications:
- LAN, inhouse networks

- (Datacom)

■
compatible with AT&T-STII standard
■
for MM fibers (50/125 µm
and 62.5/125 µm)
■
cable versions:
buffered fiber (ø 0.9 mm)
cable (ø 3 mm)
duplex cable (2 x ø 3 mm)
■
bayonet coupling, quick and easy-to-use
■
types of polishing : PC
■
Zinc diecast connector housing
with ceramic ferrule
■
Zinc diecast adapter housing with
ceramic sleeve, mounted using union nut
■
meets IEC 874-10 and CECC BFOC/2.5
■
can be mounted in rows, giving high
packing density
■
for MM fibers (50/125 µm and 62.5/125
µm)

■
cable versions:
buffered fiber (ø 0.9 mm)
cable (ø 3 mm)
duplex cable (2 x ø 3 mm)
■
due to push-pull locking mechanism
easy-to-use with high tensile strength
■
types of polishing : PC
■
colour coding: beige housing
■
connector housing in plastic with
ceramic ferrule
■
adapter housing in plastic with ceramic
or phosphor bronze sleeve, mounted
using 2 M2 screws or snap-in connection.
■
meets EN 50173 and ANSI/TIA/EIA-568-A
■
compatible with AT&T-STII standard
■
for MM fibers (50/125 µm and 62.5/125
µm)
■
cable versions:
duplex cable (2 x ø 3 mm)
■

due to push-pull locking mechanism
easy-to-use with high tensile strength
■
types of polishing : PC
■
colour coding: beige housing
■
connector housing in plastic with
ceramic ferrule
■
adapter housing in plastic with ceramic
or phosphor bronze sleeve, mounted
using 2 M2 screws or snap-in connection.
■
meets EN 50173 and ANSI/TIA/EIA-568-A
■
for MM fibers (50/125 µm and 62.5/125
µm)
■
types of polishing : PC
■
colour: dark grey
■
connector housing in plastic with
ceramic ferrule
■
meets EN 186530 (draft) and
ANSI/TIA/EIA-568-B, ISO/IEC 11801
■ insertion loss: < 0.5 dB
typ.0.2 dB

■ service life:1000 cycles
■ tensile strength:50 N (cable)
Ordering examples
DIN/APC8° patchcord, SM, 3 mm cable
length 3 m 7006 1 233-23
length 5 m 7006 1 233-25
length 10 m 7006 1 233-27
DIN/APC8° pigtail, SM, 0.9 mm buffered fiber
length 3 m 7006 1 130-23
length 5 m 7006 1 130-25
DIN adapter for PC and APC polishing
Qty 1 pc 6824 2 300-16
Ordering
Call for more
NEW!
information!
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ service life:1000 cycles (PC, APC)
■ tensile strength:100 N (cable)
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ service life:1000 cycles
■ tensile strength:100 N (cable)
■ insertion loss: < 0.5 dB
typ.0.2 dB
■ service life:1000 cycles
■ tensile strength:100 N (cable)
HK/F16/02/2001
Qty. = 1 pc.

Order No.:
length: 1 = 1 m
2 = 2 m
3 = 3 m
4 = 4 m
5 = 5 m
6 = 8 m
7 = 10 m
8 = 15 m
9 = 20 m
conn. 1 and 2: 1 = SC
2 = FC
3 = DIN
4 = E2000
5 = ST
7 = Duplex-SC
0 = no connector (-> Pigtail)
polishing:1 = PC-MM
2 = PC-SM
5 = UPC
3 = APC8º
4 = APC9°
cable: 1 = buffered fiber
2 = cable
5 = duplex cable
fiber: 1 = SM
2 = MM (50/125)
3 = MM (62,5/125)
0
6

7
0
Standard Deutsche Telekom AG
Combination possibilities: SC-SM FC DIN E2000 ST SC-MM SC-Duplex
Fiber type SM (9/125 µm)
MM (GI, 50/125 µm)
MM (GI, 62.5/125 µm)
Cable buffered fiber
(ø 0.9 mm)
Cable
(ø 3 mm)
Duplex cable
(2 x ø 3 mm)
Polishing PC-MM
PC-SM (RL > 40 dB)
UPC (RL > 50 dB)
APC8° (RL > 60 dB)
APC9° (RL > 55 dB)
KRONE Australia
Tel: +61 2 4388 4422
Fax: +61 2 4388 4499
E-mail:
KRONE China
Tel: +86 21 5442 3680
Fax: +86 21 5442 2711
E-mail:
KRONE Hong Kong
Tel: +852 2865 4888
Fax: +852 2861 1444
E-mail:

KRONE Japan
Tel: +81 3 3549 0311
Fax: +81 3 5565 2858
E-mail:
KRONE India
Tel: +91 80 225 1904
Fax: +91 80 225 1693
E-mail:
KRONE Indonesia
Tel: +62 21 520 0231
Fax: +62 21 522 1312
E-mail:
KRONE Taiwan
Tel: +886 2 2784 1680
Fax: +886 2 2702 5050
E-mail:
KRONE New Zealand
Tel: +64 4 576 9213
Fax: +64 4 576 9243
E-mail:
KRONE Vietnam
Tel: +84 4 934 3968- Ext:145, 146
Fax: +84 4 934 3956
E-mail:
KRONE Philippines
Tel: +632 848 9901
Fax: +632 848 9904
E-mail: larry.cunanan@.krone.com
KRONE Singapore & Malaysia
Tel: +65 538 8628

Fax: +65 538 8636
E-mail:
KRONE Korea
Tel: +82 2 565 4844
Fax: +82 2 555 5779
E-mail:
KRONE Thailand
Tel: +662 637 8301
Fax: +662 637 8306
E-mail:
www.kroneasia.com