Tài liệu SONEPLEX SNMP MANAGEMENT ACCESS POINT pptx

The Soneplex
®
management access point (MAP) chassis
adapts and concentrates telemetry byte oriented serial
(TBOS) alarm and control signals into simplified network
management protocol (SNMP) messages. Equipment
formerly monitored by TBOS can now be added to SNMP
management systems used by other data or transmission
products, eliminating the TBOS overlay network. The MAP
enables centralized end-to-end circuit visibility, reduces
overall costs of the management network and provides a
unified SNMP presentation to the operations personnel.
ADC’s Soneplex system is the lowest total cost solution for
carriers to grow their T1/E1-based business services. The
Soneplex system lowers the cost of T1/E1-based services
over copper or fiber, using HDSL or Optical DS2/E2
technology, in a single platform. From operations, mainte-
nance and provisioning, the Soneplex system is designed to
take costs out of today’s T1/E1 delivery approach, adding
profit to your bottom line.
FEATURES
• Supported by HP™ OpenView NMS or ADC GUI
• Ethernet LAN and serial PPP network interface ports
• Six subscriber RS-232 ports
• Forty-eight alarm contact closure inputs
• ANSI/ETSI compliant 1 rack unit chassis
• Supports Telnet access to all six subscriber ports
The Soneplex System
from ADC. The T1/E1
Service Delivery Experts
S

ONEPLEX
®
SNMP
M
ANAGEMENT
A
CCESS
P
OINT
22/98
461
Soneplex
®
SNMP MAP
The MAP element management system (EMS) software is integrated into the HP
OpenView network management system (NMS) and installs quickly. The ADC graphical
user interface (GUI) lets a network operator easily and intuitively monitor equipment
status, review alarm logs, load pre-existing ADC TBOS definitions, or customize the
display appearance. An operator can also configure the MAP to support third-party
TBOS equipment by creating and storing additional TBOS bit definition files.
The MAP concentrates six subscriber interfaces. Each interface can be configured
independently for different TBOS bit definitions. When used with ADC's Soneplex
platform, one MAP chassis can monitor 168 T1/E1 circuits. When used with ADC's Fiber
Loop Converters, 192 T1/E1 circuits can be viewed. For larger networks, the GUI EMS
allows multiple MAPs to be displayed at a single console. The MAP can be connected to
the SNMP network in two ways. First, there is an ethernet 10baseT interface for applica-
tions that require a direct connection into a local area network (LAN). Second, the MAP
has an RS-232C interface that supports point-to-point protocol (PPP) for remote access
using a modem.
Forty-eight alarm contact closure inputs are provided by the MAP. These inputs create

SNMP traps and can be used for site maintenance alarms or to monitor other transmis-
sion equipment such as the ADC T1/E1 Dual Fiber Loop Converters.
The compact one rack-unit MAP chassis is ANSI/ETSI compliant and requires minimal
space and installation time. No modification to currently operating equipment is needed
other than connecting the TBOS interface. Therefore, valuable customer service is never
interrupted. Additionally, redundant DC inputs provide an added level of security in the
event of a power input failure.
The MAP’s embedded proxy agent supports Telnet connections to each of the subscriber
ports. This enables full remote access to the Soneplex platform craft interface.
Description
Application
Soneplex
MAP
LAN
Soneplex
ECX
Fractional E1 HDSL
T1 HDSL, T1 QLX, RLX, DS3 MUX
E1 QFLC, T1 QFLC,
DS3 FLC
48 Contact Closure Inputs
- thermal alarms
- power fail alarms
- door open alarm
48 Contact Closure Inputs
- T1/E1 DFLC Modules
- thermal alarms
- power fail alarm
- door open alarm
Soneplex

Modem
Modem
PPP
RS-232
Soneplex
Soneplex
Soneplex
Soneplex
FLC
FLC
FLC
FLC
FLC
FLC
Network Management System
Soneplex
MAP
3
2/98
461
Soneplex
®
SNMP MAP
PHYSICAL
Dimensions (HxWxD):
Powering:
Temperature:
Humidity:
INTERFACES
Network:

Subscriber:
Configuration:
INDICATORS AND CONTROLS:
SOFTWARE UPDATES:
NETWORK MANAGEMENT CONSOLE
Hardware:
Network Manager:
HPOV Integration:
Element Manager:
COMPLIANCE
Mechanical:
Safety:
EMC:
Climatic:
TBOS:
SNMP:
RFCs:
1.75" x 17" x 10.2" (44 x 432 x 259 mm)
mounts in 19" or 600 mm rack
integrated cable management
-48 VDC, 260mA, 12.5W nominal
-40 VDC to -72 VDC operating range
redundant A and B inputs
screw terminal connector, separate chassis
ground lug
-5°C to 50°C
5% to 95%, non-condensing
Port 1: TCP/IP / IEEE 802.3 Ethernet / RJ45
SNMP and Telnet
Port 2: TCP/IP / RS232C / DB25

SNMP, PPP, and Telnet
Ports 1-6: TBOS / RS232 / DB9
each port independently configured for user
TBOS bit definitions; Telnet session into
network interface can be assigned to any
subscriber interface
ASCII / RS232 / DB9
VT100 terminal (or equivalent)
Power On LED front and rear, Reset button
Download over either network interface port
Protocol: TCP/IP FTP
Sun workstation - Solaris™ V2.4 or higher
Personal Computer- Microsoft WinNT™ 4.0
HP OpenView™
ADC MapAlert software
ADC MapEM software
NEBS, ETSI ETS 300 119
UL 1950, EN 60950
FCC part 15 class A, EN 55022, EN 61000
ETSI EN 300 019
AT&T, Compatibility Bulletin CB-149,
Section B2
Version 1
1155, 1157, 1212, 1213, 1317, 1471
Specifications
461 2/98 Original © 1998 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products,
ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our
headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously
enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.

ADC Telecommunications, Inc.
P.O. Box 1101
Minneapolis, Minnesota 55440-1101
FAX: (612) 946-3292
From North America, Call Toll Free: 1-800-366-3891, Ext 3223
Outside of North America: 612-938-8080
Home Page Address:
International Sales Offices: Belgium 32-2-712-6500 • United Kingdom 44-734-441955
• Montreal, Quebec (514) 677-9166 • Vancouver, BC (604) 270-1675 • Toronto, Ont.
(905) 629-3104 • Ottawa, Ont. (613) 723-2171 • Singapore 65-225-8228 •Venezuela 58-
2-286-1444 • Mexico City, Mexico 525-658-4519 • Buenos Aires, Argentina (541) 449-
2669 • Sao Paulo, Brasil 55-11-3040-0666 • Sydney, Australia 61-2-9975-1499 •
Melbourne, Australia 61-3-9585-3931 • Beijing, China 86-10-6500-7001 • Dusseldorf,
Germany 49-211-530-6550 • Seoul, Korea 82-2-333-8989
Soneplex
®
SNMP MAP
Ordering
Information
Soneplex SNMP Management Access Point
Description
Catalog Number
SPX-MAP1A