Tài liệu Datasheet - FO - Cable - Indoor - Riser PVC FR Rated docx

FIBER OPTIC SOLUTIONS
Mechanical & Environmental Characteristics
Test 3 to 8 Fibers 12 to 24 Fiber 36 to 72 Fiber
Crush Resistance: EIA-FOTP-41A 1500 N/cm 1500 N/cm 1500 N/cm
Impact Resistance (@ 1.6 N/m): EIA-FOTP-25B 500 Impacts 1000 Impacts 2000 Impacts
Flexing: EIA-FOTP-104A 1000 Cycles 1000 Cycles 1000 Cycles
Maximum Pulling Load: EIA-FOTP-33A 1000 Newtons 1800 Newtons 2700 Newtons
(224 lbs.) (403 lbs.) (604 lbs.)
Maximum Safe Operating Load: 300 Newtons 600 Newtons 1000 Newtons
(67 lbs.) (135 lbs.) (224 lbs.)
Minimum Bend Radius:
At Max. Load: 8.5 cm (3.4≤≤ ) 11 cm (4.4≤≤ ) 20 x cable O.D.
Unloaded: 5.0 cm (2.0≤ ) 8.0 cm (3.2≤ ) 10 x cable O.D.
Maximum Vertical Rise: 325m (1000 ft.) 500m (1640 ft.) 500m (1640 ft.)
(UL) Listed Type OFNP (Plenum): UL910 Pass Pass Pass
(UL) Listed Type OFNR (Riser): UL1666 Pass Pass Pass
Fiber Proof Test: 100 KPSI 100 KPSI 100 KPSI
Operating Temperature: -20°C to +70°C -20°C to +70°C -20°C to +70°C
Storage Temperature: -40°C to +70°C -40°C to +70°C -40°C to +70°C
Installation Temperature: 0°C to +70°C 0°C to +70°C 0°C to +70°C
Flame Retardant Overall Jackets yes yes yes
Optical Specifications
Max. Typical Guaranteed Core Clad
Atten. Atten. Min. Dia. Dia. Numerical
Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture
50/125 Multimode 3.5/1.5* 2.6/0.6* 400/400* 50 ± 3 125 ±2 0.200 ± 0.015
62.5/125 FDDI Multimode 3.5/1.5* 2.7/0.75* 160/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015
62.5/125 Gigabit Multimode 3.5/1.5* 2.7/0.75* 200/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015
100/140 Multimode 6.0/3.0* 4.5/2.0* 100/100* 100 + 3 140 + 4 0.290 ± 0.020
Single-mode 0.5/0.5** 0.35/0.35** Mode Field 9.3 ± 0.5 125 ± 2 0.13
(SMF-28) Diameter @1300nm

* Attenuation and Bandwidth values for Multimode: 850nm/1300nm
** Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm
Compact,
Building
Riser-Rated
Features:
■ Utilizes 900 µm PVC buffer
■ Superior crush and impact
resistance
■ Readily available in
conventional 6-, 12- and
24-fiber constructions; up
to 72 fibers offered
■ Constructions above 24
fibers feature fiber
subgroups
■ Easy-to-strip outer jacket
■ Flame retardant (UL Listed
OFNR or OFNP)
■ All-dielectric construction
fibers are surrounded by a
KEVLAR® strength
member
■ All cables tested to EIA/TIA
FOTP standards
Benefits:
■ Easy-to-strip 245/900 µm
PVC buffer
■ Optimized for all standard
connectors (900 µm

components)
■ 6- or 12-fiber subgroups
(above 24 fibers) allow for
easy routing of fibers to
termination points, while
maintaining fiber
protection
■ Best low-cost solution for
high fiber count
constructions
INDOOR CABLES
Cable and Jacket Specifications and Ordering Information
Cable Cable
Cable No. of UL Diameter Weight Jacket
Part Number Type Fibers Type (in) (mm) (Nom. lbs./km) Type
6006INHCBCXXX Distribution 6 OFNR (Riser) 0.235 5.9 80 Flame Retardant PVC
6008INHCBCXXX Distribution 8 OFNR (Riser) 0.280 7.1 125 Flame Retardant PVC
6012INHCBCXXX Distribution 12 OFNR (Riser) 0.310 7.9 140 Flame Retardant PVC
6018INHCBCXXX Distribution 18 OFNR (Riser) 0.310 7.9 140 Flame Retardant PVC
6024INHCBCXXX Distribution 24 OFNR (Riser) 0.370 9.4 215 Flame Retardant PVC
6036INHCBCXXX Distribution 36 OFNR (Riser) 0.680 17.2 576 Flame Retardant PVC
6048INHCBCXXX Distribution 48 OFNR (Riser) 0.780 19.8 676 Flame Retardant PVC
6072INHCBCXXX Distribution 72 OFNR (Riser) 0.850 21.6 913 Flame Retardant PVC
7004LZHIOCXXX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen
7006LZHIOCXXX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen
7008LZHIOCXXX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen
7012LZHIOCXXX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
7018LZHIOCXXX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
7024LZHIOCXXX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen
XXX = Fiber type, substitute this symbol in part number for desired fiber type as follows:

10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber, 100 = 100/140 Fiber.
Multimode riser and plenum cables are available in orange.
Single-mode riser and plenum cables are available in yellow.
KEVLAR is a registered trademark of the DuPont Co.
KRONE Australia
Tel: +61 2 4388 4422
Fax: +61 2 4388 4499
E-mail:
KRONE China
Tel: +86 21 5442 3680
Fax: +86 21 5442 2711
E-mail:
KRONE Hong Kong
Tel: +852 2865 4888
Fax: +852 2861 1444
E-mail:
KRONE Japan
Tel: +81 3 3549 0311
Fax: +81 3 5565 2858
E-mail:
KRONE India
Tel: +91 80 225 1904
Fax: +91 80 225 1693
E-mail:
KRONE Indonesia
Tel: +62 21 520 0231
Fax: +62 21 522 1312
E-mail:
KRONE Taiwan
Tel: +886 2 2784 1680

Fax: +886 2 2702 5050
E-mail:
KRONE New Zealand
Tel: +64 4 576 9213
Fax: +64 4 576 9243
E-mail:
KRONE Vietnam
Tel: +84 4 934 3968- Ext:145, 146
Fax: +84 4 934 3956
E-mail:
KRONE Philippines
Tel: +632 848 9901
Fax: +632 848 9904
E-mail: larry.cunanan@.krone.com
KRONE Singapore & Malaysia
Tel: +65 538 8628
Fax: +65 538 8636
E-mail:
KRONE Korea
Tel: +82 2 565 4844
Fax: +82 2 555 5779
E-mail:
KRONE Thailand
Tel: +662 637 8301
Fax: +662 637 8306
E-mail:
www.kroneasia.com
Compact Building Cable, 12 Fiber, PVC-FR/LSZH Compact Building Cable, 36 Fiber