Tải bản đầy đủ (.pdf) (2 trang)

Tài liệu Datasheet - FO - Cable - In & Outdoor - LSZH jacketed pptx

Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (602.46 KB, 2 trang )

Mechanical & Environmental Characteristics
4-12 Fibers 18-24 Fibers
Crush Resistance (EIA-FOTP-41A): 1500 N/cm 1500 N/cm
Impact Resistance (EIA-FOTP-25A): 1000 impacts 1000 impacts
Flexing (EIA-FOTP-104A): 1000 cycles 1000 cycles
Maximum Pulling Load (EIA-FOTP-33A): 1000 Newtons 1800 Newtons
(224 lbs.) (403 lbs.)
Maximum Safe Operating Load: 600 Newtons 1000 Newtons
(134 lbs.) (224 lbs.)
Minimum Bend Radius:
At Max. Load: 20 x cable O.D. 20 x cable O.D.
Unloaded: 10 x cable O.D. 10 x cable O.D.
Maximum Vertical Rise: 325 meters 325 meters
Fiber Proof Test: 100 KPSI 100 KPSI
Operating Temperature: -40°C to +70°C -40°C to +70°C
Storage Temperature (non-flexing): -40°C to +70°C -40°C to +70°C
Installation Temperature: 0°C to +70°C 0°C to +70°C
*6- to 72-Fiber
Optical Specifications
Max. Typical Guaranteed Core Clad
Atten. Atten. Min. Dia. Dia. Numerical
Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture
50/125 Multimode 3.5/1.5* 2.6/0.6* 400/400* 50 ± 3 125 ±2 0.200 ± 0.015
62.5/125 FDDI Multimode 3.5/1.5* 2.7/0.75* 160/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015
62.5/125 Gigabit Multimode 3.5/1.5* 2.7/0.75* 200/500* 62.5 ± 3 125 ± 2 0.275 ± 0.015
100/140 Multimode 6.0/3.0* 4.5/2.0* 100/100* 100 + 3 140 + 4 0.290 ± 0.020
Single-mode 1.0/1.0** 0.35/0.35** Mode Field 9.3 ± 0.5 125 ± 2 0.13
(SMF-28) Diameter @1300nm
* Attenuation and Bandwidth values for Multimode: 850nm/1300nm
** Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm
FIBER OPTIC SOLUTIONS


Tight-Buffered,
Low-Smoke,
Zero-Halogen
Jacketed
Features:
■ Available in single-mode
as well as 50 and 62.5 µm
multimode versions
■ Excellent crush, cut and
abrasion resistance
■ Available with 4–24 fibers
■ Excellent flame retardancy
(UL Listed OFNR/OFCR)
■ UV stable jacket
■ Flexible design/easy to
install
■ Color-coded buffered
fibers
■ All cables tested to EIA/TIA
FOTP standards
Benefits:
■ Saves time, labor; ideal for
direct connectorization.
■ Pull and terminate; no
need to splice at building
entrance.
■ Ideal for installation in
conduits between
buildings (non-armored)
■ Offers a convenient

alternative to PVC riser
cables
■ Armored version available
for rodent resistance
INDOOR/OUTDOOR CABLES
Cable and Jacket Specifications and Ordering Information
Cable Cable
Cable No. of UL Diameter Weight Jacket
Part Number Type Fibers Type (in) (mm) (Nom. lbs./km) Type
7004LZHIOCXXX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen
7006LZHIOCXXX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen
7008LZHIOCXXX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen
7012LZHIOCXXX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
7018LZHIOCXXX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
7024LZHIOCXXX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen
7004LZHBKOXXX Breakout 4 OFNR (Riser) 0.365 9.3 200 Low Smoke Zero Halogen
7006LZHBKOXXX Breakout 6 OFNR (Riser) 0.450 11.4 310 Low Smoke Zero Halogen
7008LZHBKOXXX Breakout 8 OFNR (Riser) 0.500 12.7 380 Low Smoke Zero Halogen
7012LZHBKOXXX Breakout 12 OFNR (Riser) 0.665 16.9 680 Low Smoke Zero Halogen
7018LZHBKOXXX Breakout 18 OFNR (Riser) 0.640 16.3 600 Low Smoke Zero Halogen
7024LZHBKOXXX Breakout 24 OFNR (Riser) 0.720 18.3 730 Low Smoke Zero Halogen
7004LZHBKAXXX Armored Breakout 4 OFCR (Riser) 0.650 16.5 825 Low Smoke Zero Halogen
7006LZHBKAXXX Armored Breakout 6 OFCR (Riser) 0.675 17.2 935 Low Smoke Zero Halogen
7008LZHBKAXXX Armored Breakout 8 OFCR (Riser) 0.785 19.9 1170 Low Smoke Zero Halogen
7012LZHBKAXXX Armored Breakout 12 OFCR (Riser) 0.850 21.6 1440 Low Smoke Zero Halogen
7018LZHBKAXXX Armored Breakout 18 OFCR (Riser) 0.850 21.6 1355 Low Smoke Zero Halogen
7024LZHBKAXXX Armored Breakout 24 OFCR (Riser) 0.990 25.2 1800 Low Smoke Zero Halogen
XXX = Fiber type, substitute this symbol in part number for desired fiber type as follows:
10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber, 100 = 100/140 Fiber.
Multimode riser and plenum cables are available in orange.

Single-mode riser and plenum cables are available in yellow.
KEVLAR is a registered trademark of the DuPont Co.
KRONE Australia
Tel: +61 2 4388 4422
Fax: +61 2 4388 4499
E-mail:
KRONE China
Tel: +86 21 5442 3680
Fax: +86 21 5442 2711
E-mail:
KRONE Hong Kong
Tel: +852 2865 4888
Fax: +852 2861 1444
E-mail:
KRONE Japan
Tel: +81 3 3549 0311
Fax: +81 3 5565 2858
E-mail:
KRONE India
Tel: +91 80 225 1904
Fax: +91 80 225 1693
E-mail:
KRONE Indonesia
Tel: +62 21 520 0231
Fax: +62 21 522 1312
E-mail:
KRONE Taiwan
Tel: +886 2 2784 1680
Fax: +886 2 2702 5050
E-mail:

KRONE New Zealand
Tel: +64 4 576 9213
Fax: +64 4 576 9243
E-mail:
KRONE Vietnam
Tel: +84 4 934 3968- Ext:145, 146
Fax: +84 4 934 3956
E-mail:
KRONE Philippines
Tel: +632 848 9901
Fax: +632 848 9904
E-mail: larry.cunanan@.krone.com
KRONE Singapore & Malaysia
Tel: +65 538 8628
Fax: +65 538 8636
E-mail:
KRONE Korea
Tel: +82 2 565 4844
Fax: +82 2 555 5779
E-mail:
KRONE Thailand
Tel: +662 637 8301
Fax: +662 637 8306
E-mail:
Breakout Cable, 12-Fiber
www.kroneasia.com
Indoor/Outdoor, Low Smoke Zero Halogen Cable
Armored Breakout Cable, 12-Fiber

×