Tài liệu Optical Signal Management Modules docx

www.adc.com • +1-952-938-8080 • 1-800-366-3891
175
Optical Signal Management Modules
Introduction 176
Standard Value-Added Module System 177
WideVAM
™
System for Fiber Distribution Frames (FDF) 187
Mini/Micro VAM System for
Next Generation Frames (NGF) 194
Value-Added Module System for Optical
Distribution Frames (OMX
™
600) 200
176
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
176
Value-Added Module System
Introduction
ADC’s Value-Added Connector Module System (VAM System) adds flexibility and functionality to the
optical transport system by enabling telecommunications service providers to easily incorporate optical
components into the network. This versatile platform lays the foundation for the fiber distribution frame
of the future.
The VAM System consists of a variety of chassis and optical components that fit into all existing ADC
fiber distribution frames and various other mounting environments. Optical components may include:
• Splitters
• Wavelength division multiplexers (WDMs)
• Variable attenuators
Features and Benefits

VAM chassis and modules available for all ADC fiber frames
One-stop shop for complete optical transport system requirements
Monitor testing
Enables providers to troubleshoot networks without forcing disruption of service
Enclosed plug-in modules
Optical components are protected from physical and environmental damage
Angled retainers
Maintains minimum bend radius of fiber patch cords
Horizontal mounted plug-in modules
Modules can be added or removed from the chassis without interfering with existing terminated
patch cords
Universal mounted plug-in modules
No need to order different part numbers for left side or right side mounted modules
Extensive product labeling
Customers have all the information required for installation and maintenance without referring
to the user manual or drawings
Flexible platform
Modules can be created for new applications quickly and easily to meet customer requirements
Module Labeling System
Schematics are marked on peel-off labels that can be attached to the chassis designation
labeling system
Custom Configurations
Custom splitter configurations available upon request, call ADC Technical Assistance Center
at 1-800-366-3891.
177
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
177
Description

Unloaded chassis for ADC Front Load frames
No rear cable management or doors attached
to module
Unloaded chassis for ADC Rear Load frame
Rear cable management and doors attached
to module
Catalog Number
1
FDF-STDVAM
FDF-FCMVAM
Dimensions (HxWxD)
8.0" x 21.6" x 8.7"
(20.32 x 54.86 x 22.10 cm)
8.0" x 24.4" x 12.1"
(20.32 x 61.98 x 30.73 cm)
Ordering Information
8 Inch Chassis – 12 Single Plug-In Modules
The FDF VAM chassis was designed to fit into any open chassis location within an existing ADC fiber
distribution frame (FDF). The FDF VAM chassis is available with or without rear cable management. It
can accommodate a maximum of either 12 plug-in modules, 12 bulkhead plates, 12 blank panels or
any combination thereof. The 8" Rear Load chassis mounts in EIA or WECO racks.
FDF-STDVAM
For ADC Front Load Frames ONLY
FDF-FCMVAM
For ADC Rear Load Frames ONLY
Value-Added Module System
ADC Fiber Distribution Frame - Standard Chassis
1
This product is available in black; for this option, add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.

178
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
178
7-Inch Chassis – 12 Single Plug-In Modules
The 7" VAM chassis was designed to fit into any open chassis location
within an existing ADC 7" module system FDF or in an LGX-style
frame. It can accommodate a maximum of 12 single plug-in modules,
12 bulkhead plates, 12 blank panels or any combination thereof.
Adjustable mounting brackets are provided for 19" or 23" rack
mounting environments. The 7" chassis mounts in EIA or WECO racks.
FVM-19X700
Description
Unloaded chassis for ADC 7" style frames
23" VCG included
Unloaded chassis for LGX 7" style frames
with rear doors
23" VCG included
Unloaded chassis for ADC 7" style frames
19" VCG included
Unloaded chassis for LGX 7" style frames
with rear doors
19" VCG included
Front vertical cable guides for
19" mounting environments
Front vertical cable guides for
23" mounting environments
Catalog Number
1

FVM-19X700
FVM-19X700X11
FVM-19X719
FVM-19X719X11
VCG-25
VCG-45
Dimensions
(HxWxD)
7.0" x 19.0" or 23" x 12"
(17.78 x 48.26 or 58.42 x 30.48 cm)
7.0" x 19.0" or 23" x 11.03"
(17.78 x 48.26 or 58.42 x 28.02)
7.0" x 19.0" or 23" x 12"
(17.78 x 48.26 or 58.42 x 30.48 cm)
7.0" x 19.0" or 23" x 11.03"
(17.78 x 48.26 or 58.42 x 28.02)
Ordering Information
Value-Added Module System
ADC Fiber Distribution Frame - Standard Chassis
5.25-Inch Chassis – 8 Single Plug-In Modules
The 5.25" VAM chassis was designed to fit into any 23" rack
mounting environment. It can accommodate a maximum of
8 plug-in modules, 8 bulkhead plates, 8 blank panels, or any
combination thereof.
Description
Unloaded chassis 23" racks
Catalog Number
!
FDM24-VAM525
Dimensions

(HxWxD)
5.25" x 23" x 12"
(13.34 x 58.42 x 30.48 cm)
Ordering Information
1
This product is available in black; for this option, add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
179
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
179
1
This product is available in black; for this option, add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
4 Inch Chassis – 6 Single Plug-In Modules
The 4" VAM chassis was designed to fit into any 23"
rack mounting environment. It can accommodate a
maximum of 6 plug-in modules, 6 bulkhead plates,
6 blank panels or any combination thereof.
Not for use in FDF
FVM-23X400
Description
Unloaded chassis for 23" racks
Catalog Number
1
FVM-23X400
Dimensions
(HxWxD)
4.0" x 23" x 12"

(10.16 x 58.42 x 30.48 cm)
Ordering Information
3.5 Inch Chassis – 4 Single Plug-In Modules
The 3.5" VAM chassis was designed to fit into
any 19" rack mounting environment. It can
accommodate a maximum of 4 plug-in modules, 4
bulkhead plates, 4 blank panels or any combination
thereof. Adjustable mounting brackets are provided
for 23" mounting environments.
Not for use in FDF
FVM-19X350
Description
Unloaded chassis for 19" or 23" racks
Dimensions
(HxWxD)
3.5" x 19" or 23" x 12"
(8.89 x 48.26 or 58.26 x 30.48 cm)
Ordering Information
1.75 Inch Chassis – 2 Single Plug-In Modules
The 1.75" VAM chassis was designed to fit into any
19" rack mounting environment. It can accommodate
a maximum of 2 plug-in modules, 2 bulkhead plates,
2 blank panels or any combination thereof. Adjustable
mounting brackets are provided for 23" mounting
environments.
Not for use in FDF
FVM-19X175
Description
Unloaded chassis for 19" or 23" racks;
no front door

Dimensions
(HxWxD)
1.75" x 19" or 23" x 12"
(4.45 x 48.26 or 58.26 x 30.48 cm)
Ordering Information
Catalog Number
1
FVM-19X350
Catalog
Number
1
FVM-19X175
Value-Added Module System
Universal Chassis used in Non-ADC Optical Distribution Frame
180
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
180
1
This product is available in black; for this option, add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
FL2000 VAM System Chassis
• Chassis to house ADC VAM plug-in modules in FL2000 installations
• 19" rack mount
• Vertical cable guides included
19.0"
(48.26 cm)
5.0"
(12.7 cm)

5.25"
(13.34 cm)
10.14"
(25.76 cm)
FL2 VAM 9-Position Chassis
Description
Unloaded FL2 VAM chassis
5.25" H (13.34 cm)
Accommodates 4 plug-in modules
7" H (17.78 cm)
Accommodates 6 plug-in modules
10.5" H (26.67 cm)
Accommodates 9 plug-in modules
Catalog Number
1
FL2-4VAM525
FL2-6VAM700
FL2-9VAM105
Dimensions (HxWxD)
5.25" x 19" x 10.14"
(13.34 x 48.26 x 25.76 cm)
6" x 19" x 10.14"
(15.24 x 48.26 x 25.76cm)
10.5" x 19" x 10.14"
(26.67 x 48.26 x 25.76 cm)
Ordering Information
19.0"
(48.26 cm)
10.14"
(25.76 cm)

10.47"
(26.6 cm)
5.0"
(12.7 cm)
FL2 VAM 4-Position Chassis
Note: The FL2000 VAM system is designed to accept only front access modules; i.e., all input and output adapters,
pigtails and/or bare fibers must be located on the front of the plug-in modules.
For complete information on ADC’s FL2000 product family, please call 1-800-366-3891, and ask for catalog 803, or
visit our website at www.adc.com.
Value-Added Module System
ADC Fiber Distribution Frame
181
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
181
Catalog Number
VSM -
Module Option
Input front, output front
Input front, output rear
Input rear, output rear
Input rear, output front
2
3
4
5
Split Ratio
1x2
1x2

1x2
1x2
1x2
1x2
1x2
1x2
1x2
1x2
1x2
1x2
2x2
1x3
1x4
1x5
1x6
1x7
1x8
1x9
1x10
1x11
1x12
1x13
1x14
1x15
1x16
1x32
50/50
55/45
60/40
65/35

66.6/33.3
70/30
75/25
80/20
85/15
90/10
95/5
99/1
50/50
33/33/33
25/25/25/25
20/20/20/20/20
16.6/16.6/16.6/
16.6/16.6/16.6
14.3/14.3/14.3/
14.3/14.3/14.3/14/3
12.5/12.5/ 12.5
11.1/11.1/11.1/ 11.1
10/10/10/ 10
9.1/9.1/9.1/ 9.1
8.33/8.33/8.33/ 8.83
7.7/7.7/7.7/ 7.7
7.14/7.14/7.14/ 7.14
6.66/6.66/6.66/ 6.66
6.25/6.25/6.25/ 6.25
3.125/3.125/3.125/ 3.125
See pages 206-208
for specifications.
Other Split Ratios are available.
Call ADC Technical Assistance

Center at 1-800-366-3891.
2000
2100
2200
2300
2350
2400
2500
2600
2700
2800
2900
2950
2030
3900
4900
5300
6000
7000
8000
9000
A110
B111
C112
D113
E114
F115
G116
M132
Number of Splitters

Single Splitter
Dual Splitter (2)
Triple Splitter (3)
A
B
C
Output Connector/Adapter
2U
2A
7U
7A
LA
00
FC ultra polish
FC angled polish
SC

ultra polish
SC

angled polish
LX.5 angled polish
Bare fiber
Input Connector/Adapter
Singlemode
FC ultra polish
FC angled polish
SC

ultra polish

SC

angled polish
LX.5 angled polish
Bare fiber
2U
2A
7U
7A
LA
00
Standard VAMVSM
Input Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
00 = Adapters only on
input and output ports
Output Pigtail Length
IN
OUT
REAR FRONT
Connectorized
pigtail to OSP
port on the
fiber frame
Adapter to
attach patch
cord or pigtail
to OSP port

Adapter to attach
patch cord to
equipment
SPLITTER
COMPONENTS
Connectorized
pigtail (3 mm
jacketed) to
equipment
or to port
on frame
Stub fiber
input spliced
to equipment
or OSP fibers
(2 mm jacketed)
Splitter Module for FDF, FL2000 and non-ADC Optical Distribution Frames
Value-Added Module System
Splitter Module
REAR
3
IN OUT
FRONT
Input Front,
Output Rear
1 x N
OUTPUT
OUTPUT
INPUT
2

IN OUT
FRONTREAR
OUTPUT
INPUT
OUTPUT
Input Front,
Output Front
1 x N
4
Input Rear,
Output Rear
IN OUT
REAR
OUTPUT
OUTPUT
FRONT
INPUT
1 x N
IN OUT
Input Rear,
Output Front
5
REAR FRONT
OUTPUT
OUTPUT
INPUT
1 x N
Other connector types are available. Please contact ADC.
182
6/04 • 1247379

MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
182
A Single
Module
Configuration
Catalog Number
Mux Port Connector/Adapter
2U
2A
7U
7A
LA
00
FC ultra polish
FC angled polish
SC

ultra polish
SC

angled polish
LX.5
®
angled polish
Bare fiber
Demux Port Pigtail Lengt
Configuration
Demux Port
Connector/Adapter

2U
2A
7U
7A
LA
00
FC ultra polish
FC angled polish
SC

ultra polish
SC

angled polish
LX.5
®
angled polish
Bare fiber
Unidirectional multiplexer
Unidirectional demultiplexer
Bidirectional λ
1
Tx/λ
2
Rx
Bidirectional λ
1
Rx/λ
2
Tx

45 dB isolation,
pass 1310
45 dB isolation,
pass 1550
(Dual only) unidirectional
multiplexer, unidirectional
demultiplexer*
(Dual only) bidirectional
λ
1
Tx/λ
2
Rx, bidirectional
λ
2
Tx/λ
1
Rx
A
C
E
G
J
K
L
M
WDM Type (λ
1
; λ
2

)
B Dual
C Triple
1 Standard
Isolation
2 High
3 Very High
Mux Port Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
00 = Adapters only on mux
and demux ports
See pages 206-208 for specific
* WDM Type "L" includes
(1) unidirectional multiplexe
(standard isolation) and
(1) unidirectional demultiple
(isolation specified by
next character)
Wavelength
1310 (λ
1
)/1550 (λ
2
)
A
2
3
4

5
MUX front, DEMUX front
MUX front, DEMUX rear
MUX rear, DEMUX rear
MUX rear, DEMUX front
Standard VAM
WDM
WDM-
REAR FRONT
Connectorized
pigtail
Adapter port
Adapter
port
WDM
Connectorized
pigtail
(3 mm
jacketed)
Bare pigtail
(2 mm
jacketed)
Value-Added Module System
WDM Module
WDM Module for FDF, FL2000 and non-ADC Optical Distribution Frames
Wavelength division multiplexers are mounted within modules in single or dual configurations.
The connectors can be mounted on the front and rear, or on the front only.
In the ordering charts, the abbreviation “mux” references the multiplexed
side of the WDM, the side where two optical signals co-exist on one fiber.
The abbreviation “demux” references the demultiplexed side of the WDM,

the side where each signal appears on its own fiber. Both unidirectional
and bidirectional WDMs are available as shown below.
1310
1310 1550
1550
1310
1310 1550
1550
UNIDIRECTIONAL MULTIPLEXER
BIDIRECTIONAL TRANSMISSION
DEMUX MU
X
1310
1310 1550
1550
MUX DEMUX
DEMUX MUX
1310
1310 1550
1550
MUX
DEMUX
UNIDIRECTIONAL DEMULTIPLEXER
Other connector types are available. Please contact ADC.
183
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
183
WDM Module for FDF, FL2000 and non-ADC Optical Distribution Frames

4
Mux Rear,
Demux Rear
REAR
Mux Rear,
Demux Front
5
REAR FRONT
2
FRONTREAR REAR
Demux
Demux
Demux
Mux
Demux
3
FRONT FRONT
Mux Front,
Demux Rear
WDM
Demux
Demux
Mux
Mux
Demux
Demux
Mux
Mux Front,
Demux Front
WDM WDM

WDM
Value-Added Module System
WDM Module
184
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
184
Monitor Module for FDF, FL2000 and non-ADC Optical Distribution Frames
Catalog Number
Input Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
000 = Adapters only
on input, output and
monitor ports
Monitor Pigtail Length
Output Pigtail Length
Splitter Ratio
A
B
C
E
F
H
J
K
90/10
95/05

50/50
80/20
75/25
70/30
60/40
99/01
Module Style
Dual Monitor Cross-Connect
with attenuator
Customer Premises
Customer Premises Monitor
Dual Monitor Cross-Connect
Single Monitor Cross-Connect
with attenuation
Dual Monitor Cross-Connect
Dual Monitor Cross-Connect
Customer Premises
Single Monitor Cross-Connect
1
B
C
D
F
G
J
P
R
Output Connector
Type Singlemode
2U

2A
7U
7A
LA
FC ultra polish
FC angled polish
SC ultra polish
SC angled polish
LX.5
®
angled polish
VMM -
Monitor Connector
Type Singlemode
2U
2A
7U
7A
LA
FC ultra polish
FC angled polish
SC ultra polish
SC angled polish
LX.5
®
angled polish
Input Connector
Type Singlemode
2U
2A

7U
7A
LA
FC ultra polish
FC angled polish
SC ultra polish
SC angled polish
LX.5
®
angled polish
1
2
3
1 circuit
2 circuits
3 circuits
Number of
Circuits per VAM
See pages 206-208 for specifications.
Value-Added Module System
Monitor Module
Other connector types are available. Please contact ADC.
185
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
185
Monitor Module for FDF, FL2000 and non-ADC Optical Distribution Frames
Dual Monitor
Cross-Connect

D
Tx
Rx
Tx MON
Rx MON
Tx
Rx
SPLITTER
90%
10%
SPLITTER
90%
10%
Dual Monitor
Cross-Connect
G
Rx
Tx Mon
Rx Mon
Rx
Tx
1 x 2
1 x 2
Tx
Insertion/Detection
Cross-Connect
F
Tx
Rx
Mon

Rx
Tx
1 x 2
VAR
ATTN
Customer Premises
Monitor Module
B
SRC Rx
CUST MON
SRC MON
CUST Rx
SRC Tx
CUST Tx
1 x 2
SPLITTER A
1 x 2
SPLITTER B
XX%
XX%
XX%
XX%
CUST
MON
SRC
MON
SRC Rx
CUST Rx
CUST Tx
SRC Tx

1 x 2
SPLITTER
Customer Premises
Monitor Module
P
1 x 2
SPLITTER
XX.XX%
XX.XX%
XX.XX%
XX.XX%
Dual Monitor Cross-
Connect with Var. Attn.
1
Tx
Rx Mon
Tx Mon
Tx
Rx
1 x 2
1 x 2
Rx
VAR
ATTN
Dual Monitor
Cross-Connect
J
Tx
Mon Tx
Mon Rx

Rx
Rx SRC
Tx SRC
1 x 2
1 x 2
Single Monitor
Cross-Connect
R
Tx
AI
Rx
Tx
A
Tx MON
A2
Rx
1 x 2
SPLITTER
XX.XX%
XX.XX%
Customer Premises
Monitor Module
C
SOURCE
MON
CUSTOMER
MON
CUSTOMER
Rx
CUSTOMER

Rx
SOURCE
Tx
SOURCE
Tx
SPLITTER
SPLITTER
10%
90%
10%
90%
Value-Added Module System
Monitor Module
186
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
186
Bulkhead Plates and Blanks
ADC
ADC
ADC
ADC
VAM-BLNK
VAM-6PBX
Description
Blank plate
Six position bulkhead plates loaded with:
Singlemode
FC adapters

FC angled polish adapters
SC adapters
SC angled polish adapters
(3) duplex SC adapters
Catalog
Number*
VAM-BLNK
VAM-6PB2
VAM-A6PB2
VAM-6PB7
VAM-A6PB5
VAM-D6PB7
Ordering Information
Terminators
Terminator plugs should be ordered for each unterminated leg on ultra polish adapter ports. For
configurations with pigtails an adapter is also required.
Description
FC connector
SC connector
Catalog Number
FOC-TERMFC-P
FOC-TERMSC-P
Ordering Information
* These products are available in black; for this option, simply add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
Value-Added Module System
Other connector types are available. Please contact ADC.
187
6/04 • 1247379
MSO Market Solutions

www.adc.com • +1-952-938-8080 • 1-800-366-3891
187
Value-Added Module System
Fiber Distribution Frame (FDF) WideVAM
™
WideVAM
™
Chassis
Description
Unloaded chassis for ADC
front load frames; accommodates
6 WideVAM modules
Catalog Number
1
FDF-STDWVAM
Dimensions
(HxWxD)
8" x 21.60" x 8.84"
(20.32 x 54.86 x 22.45 cm)
Ordering Information
Description
Unloaded chassis for ADC
rear load frames; accommodates
6 WideVAM modules
Catalog Number
1
FDF-FCMWVAM
Dimensions
(HxWxD)
8" x 24.41" x 12.11"

(20.32 x 62 x 30.76 cm)
Ordering Information
ADC’s WideVAM family of products allows for an even more
efficient integration of optical components into the FDF.
WideVAM chassis are available for both the 8" FDF product
family and universal 19"/23" rack mount environments. The
WideVAM chassis continue to provide the utmost protection,
modularity and flexibility for all optical component needs.
The WideVAM incorporates 18 front and 10 rear ports to
provide 50 percent more density than the standard FDF VAM.
7-inch and 8-inch WideVAM chassis are available, ensuring
consistent, superior cable management within the frame.
1
This product is available in black; add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
188
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
188
Value-Added Module System
Fiber Distribution Frame (FDF) WideVAM
™
WideVAM
™
Chassis
Description
3.5" unloaded chassis;
accommodates 2 WideVAM modules
Catalog Number

1
FVM-19X350W-M6
Dimensions
(HxWxD)
3.5" x 19" x 11.97"
(8.89 x 48.26 x 30.40 cm)
Ordering Information
Description
7" unloaded chassis;
accommodates 6 WideVAM modules
Catalog Number
1
FVM-19X700W
Dimensions
(HxWxD)
7" x 19" x 11.94"
(17.78 x 48.26 x 30.33 cm)
Ordering Information
1
This product is available in black; add “-BK” to the end of the catalog number.
Please contact the Technical Assistance Center at 1-800-366-3891 with any questions.
189
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
189
Value-Added Module System
Splitter Module
Splitter Module for Fiber Distribution Frame (FDF) WideVAM
™

4
Input Rear,
Output Rear
IN OUT
REAR
2
IN OUT
FRONTREAR REAR
OUTPUT
OUTPUT
OUTPUT
INPUT
OUTPUT
3
IN OUT
FRONT FRONT
Input Front,
Output Rear
1 x N
OUTPUT
OUTPUT
INPUT
INPUT
Input Front,
Output Front
1 x N 1 x N
IN OUT
Input Rear,
Output Front
5

REAR FRONT
OUTPUT
OUTPUT
INPUT
1 x N
Other connector types are available. Please contact ADC.
Catalog Number
VSMW- __ __ __ __ __ __ __ __ __ __ ____ ____
Split Ratio
2000 1x2 50/50
2100 1x2 55/45
2200 1x2 60/40
2300 1x2 65/35
2350 1x2 66.6/33.3
2400 1x2 70/30
2500 1x2 75/25
2600 1x2 80/20
2700 1x2 85/15
2800 1x2 90/10
2900 1x2 95/5
2950 1x2 99/1
2030 1x2 50/50
3900 1x3 33/33/33
4900 1x4 25/25/25/25
5300 1x5 20/20/20/20/20
6000 1x6 16.6/16.6/ 16.6
7000 1x7 14.3/14.3/ 14.3
8000 1x8 12.5/12.5/ 12.5
9000 1x9 11.1/11.1/ 11.1
A110 1x10 10/10/10/ 10

B111 1x11 9.1/9.1/ 9.1
C112 1x12 8.33/8.33 8.33
D113 1x13 7.7/7.7/ 7.7
E114 1x14 7.14/7.14 7.14
F115 1x15 6.66/6.66/ 6.66
G116 1x16 6.25/6.25/ 6.25
M132 1x17 3.125/3.125/ 3.125
Input Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
00 = Adapters only on
input and output ports
Output Pigtail Length
Module Option
2 Input front, output front
3 Input front, output rear
4 Input rear, output rear
5 Input rear, output front
Input Connector/Adapter
Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Output Connector/Adapter

Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Number of Splitters
A Single splitter
B Dual splitter
C Triple splitter
Other split ratios are available.
Call ADC Technical Assistance
Center at 1-800-366-3891.
See pages 206-208 for specifications.
190
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
190
Value-Added Module System
WDM Module
WDM Module for Fiber Distribution Frame (FDF) WideVAM
™
In the ordering charts, the abbreviation “mux” references the multiplexed
side of the WDM, the side where two optical signals coexist on one fiber.
The abbreviation “demux” references the demultiplexed side of the WDM,
the side where each signal appears on its own fiber. Both unidirectional

and bidirectional WDMs are available as shown below.
1310
1310 1550
1550
1310
1310 1550
1550
UNIDIRECTIONAL MULTIPLEXER
BIDIRECTIONAL TRANSMISSION
DEMUX MU
X
1310
1310 1550
1550
MUX DEMUX
DEMUX MUX
1310
1310 1550
1550
MUX
DEMUX
UNIDIRECTIONAL DEMULTIPLEXER
Catalog Number
WDMW- __ __ __ __ __ __ __ __ __ ____ ____
Mux Port
Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
00 = Adapters only on

mux and demux ports
Demux Port
Pigtail Length
Configuration
2 MUX front, DEMUX front
3 MUX front, DEMUX rear
4 MUX rear, DEMUX rear
5 MUX rear, DEMUX front
Demux Port
Connector/Adapter
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Mux Port
Connector/Adapter
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Wavelength
A 1310 (λ1)/1550(λ2)

* WDM Type “L” includes
(1) unidirectional multiplexer
(standard isolation) and
(1) unidirectional demultiplexer
(isolation specified by next character)
See pages 206-208 for specifications.
Module
Configuration
A Single
B Dual
C Triple
Isolation
1 Standard
2 High
3 Very high
WDM Type (λ1, λ2)
A Unidirectional multiplexer
C Unidirectional demultiplexer
E Bidirectional l1 Tx/l2 Rx
G Bidirectional l
1 Rx/l2 Tx
J 45 dB isolation, pass 1310
K 45 dB isolation, pass 1550
L (Dual only) unidirectional
multiplexer, unidirectional
demultiplexer*
M (Dual only) bidirectional
l
1 Tx/l2 Rx, bidirectional
l

2 Tx/l1 Rx
Other connector types are available. Please contact ADC.
191
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
191
Value-Added Module System
WDM Module
4
Mux Rear,
Demux Rear
REAR
Mux Rear,
Demux Front
5
REAR FRONT
2
FRONTREAR REAR
Demux
Demux
Demux
Mux
Demux
3
FRONT FRONT
Mux Front,
Demux Rear
WDM
Demux

Demux
Mux
Mux
Demux
Demux
Mux
Mux Front,
Demux Front
WDM WDM
WDM
WDM Module for Fiber Distribution Frame (FDF) WideVAM
™
192
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
192
Value-Added Module System
Monitor Module
Monitor Module for Fiber Distribution Frame (FDF) WideVAM
™
Catalog Number
VMMW-__ __ __ __ __ __ __ __ __
Input Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
000 = Adapters only on
input, output and
monitor ports

Monitor Pigtail Length
Input Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Output Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Monitor Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish

00 Bare fiber
Number of Circuits
per VAM
1 1 circuit
2 2 circuits
3 3 circuits
Split Ratio
A 90/10
B 95/05
C 50/50
E 80/20
F 75/25
H 70/30
J 60/40
K 99/01
Module Style
B Cross-connect customer
premises
D Dual monitor cross-connect
G Dual monitor cross-connect
J Dual monitor
P Customer premises
R Single monitor cross-connect
Output Pigtail Length
Other connector types are available. Please contact ADC.
See pages 206-208 for specifications.
193
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891

193
Value-Added Module System
Monitor Module
Monitor Module for Fiber Distribution Frame (FDF) WideVAM
™
Dual Monitor
Cross-Connect
D
Tx
Rx
Tx MON
Rx MON
Tx
Rx
SPLITTER
90%
10%
SPLITTER
90%
10%
Single Monitor
Cross-Connect
R
Dual Monitor
Cross-Connect
G
Rx
Tx Mon
Rx Mon
Rx

Tx
1 x 2
1 x 2
Tx
Customer Premises
Monitor Module
B
SRC Rx
CUST MON
SRC MON
CUST Rx
SRC Tx
CUST Tx
1 x 2
SPLITTER A
1 x 2
SPLITTER B
XX%
XX%
XX%
XX%
CUST
MON
SRC
MON
SRC Rx
CUST Rx
CUST Tx
SRC Tx
1 x 2

SPLITTER
Customer Premises
Monitor Module
P
1 x 2
SPLITTER
XX.XX%
XX.XX%
XX.XX%
XX.XX%
Tx
AI
Rx
Tx
A
Tx MON
A2
Rx
1 x 2
SPLITTER
XX.XX%
XX.XX%
Dual Monitor
Cross-Connect
J
Tx
Mon Tx
Mon Rx
Rx
Rx SRC

Tx SRC
1 x 2
1 x 2
194
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
194
Other connector types are available. Please contact ADC.
Value-Added Module System
ADC Next Generation Frames (NGF) Mini-Vam
The NGF VAM chassis is designed to mount on all standard NGF frame styles and is interchangeable
with termination, splice, and storage modules. Each chassis accommodates up to 12 mini-VAM modules.
Catalog Number
Block Style*
1
2
SC
FC
NGF - TB D
Block Orientation
L
R
Left
Right
Cable Exit Direction (Rear)
U
D
Upward
Downward

NGF VAM Chassis
* NGF VAMs with LX.5
®
adapters can be placed in either of these block styles.
Please contact ADC Technical Assistance Center at 1-800-366-3891 with any questions.
* Chassis accept package style H.
Description
Unloaded chassis for ADC NGF;
accommodates 12 MicroVAMS.
Order chassis for left or right side of NGF;
add L or R to end of catalog number.
Catalog Number*
NGF-VSPM-7000
Dimensions
(HxWxD)
11.65" x 4.67" x 17.94"
(29.6 x 11.9 x 45.6 cm)
Ordering Information
ADC Next Generation Frame (NGF) Micro-VAM Chassis
1X2 VIDEO WDM
MICROVAM
195
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
195
Value-Added Module System
Splitter Module
Splitter Module for Next Generation Frames (NGF)
2

IN OUT
FRONTREAR
OUTPUT
INPUT
OUTPUT
3
OUTPU
OUTPU
Input Front,
Output Front
1 x N
IN OUT
Input Rear,
Output Front
5
REAR FRONT
OUTPUT
OUTPUT
INPUT
1 x N
Catalog Number
NGF-V__ __ __ __ __ __ __ __ __ __ ____ ____
Module Option
2 Input front, output front
5 Input rear, output front
Split Ratio
2000 1x2 50/50
2100 1x2 55/45
2200 1x2 60/40
2300 1x2 65/35

2350 1x2 66.6/33.3
2400 1x2 70/30
2500 1x2 75/25
2600 1x2 80/20
2700 1x2 85/15
2800 1x2 90/10
2900 1x2 95/5
2950 1x2 99/1
2030 1x2 50/50
3900 1x3 33/33/33
4900 1x4 25/25/25/25
5300 1x5 20/20/20/20/20
6000 1x6 16.6/16.6/16.6
16/6/16.6/16.6
7000 1x7 14.3/14.3/14.3/14.3
14.3/14.3/14.3
8000 1x8 12.5/12.5/ 12.5
Input Connector/Adapter
Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Input Pigtail Length
Example (In Meters):
01 = 1 m

10 = 10 m
00 = Adapters only on
input and output ports
Output Pigtail Length
Output Connector/Adapter
Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Number of Splitters
A Single splitter
B Dual splitter
C Triple splitter
Other split ratios are available.
Call ADC Technical Assistance
Center at 1-800-366-3891.
See pages 206-208 for specifications.
Other connector types are available. Please contact ADC.
196
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
196
Value-Added Module System
WDM Module

WDM Module for Next Generation Frames (NGF)
In the ordering charts, the abbreviation “mux” references the multiplexed
side of the WDM, the side where two optical signals coexist on one fiber.
The abbreviation “demux” references the demultiplexed side of the WDM,
the side where each signal appears on its own fiber. Both unidirectional
and bidirectional WDMs are available as shown below.
1310
1310 1550
1550
1310
1310 1550
1550
UNIDIRECTIONAL MULTIPLEXER
BIDIRECTIONAL TRANSMISSION
DEMUX MU
X
1310
1310 1550
1550
MUX DEMUX
DEMUX MUX
1310
1310 1550
1550
MUX
DEMUX
UNIDIRECTIONAL DEMULTIPLEXER
Catalog Number
NGF-W__ __ __ __ __ __ __ __ __ ____ ____
Mux Port

Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
00 = Adapters only on
mux and demux ports
Demux Port
Pigtail Length
Configuration
2 MUX front, DEMUX front
5 MUX rear, DEMUX front
Demux Port
Connector/Adapter
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Mux Port
Connector/Adapter
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish

00 Bare fiber
Wavelength
A 1310 (λ1)/1550(λ2)
* WDM Type “L” includes
(1) unidirectional multiplexer
(standard isolation) and
(1) unidirectional demultiplexer
(isolation specified by next character)
See pages 206-208 for specifications.
Module
Configuration
A Single
B Dual
C Triple
Isolation
1 Standard
2 High
3 Very high
WDM Type (λ1, λ2)
A Unidirectional multiplexer
C Unidirectional demultiplexer
E Bidirectional λ1 Tx/λ2 Rx
G Bidirectional λ1 Rx/λ2 Tx
J 45 dB isolation, pass 1310
K 45 dB isolation, pass 1550
L (Dual only) unidirectional
multiplexer, unidirectional
demultiplexer*
M (Dual only) bidirectional
λ

1
Tx/λ
2
Rx, bidirectional
λ
2
Tx/λ
1
Rx
Other connector types are available. Please contact ADC.
197
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
197
Value-Added Module System
WDM Module
2
FRONTREAR
Demux
Mux
Demux
De
De
Mux Front,
Demux Front
WDM
Mux Rear,
Demux Front
5

REAR FRONT
Demux
Demux
Mux
WDM
WDM Module for Next Generation Frames (NGF)
198
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
198
Other connector types are available. Please contact ADC.
Value-Added Module System
Monitor Module
Monitor Module for Next Generation Frames (NGF)
Catalog Number
NGF-M__ __ __ __ __ __ __ __ __
Input Pigtail Length
Example (In Meters):
01 = 1 m
10 = 10 m
000 = Adapters only on
input, output and
monitor ports
Monitor Pigtail Length
Input Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish

7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Output Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
Monitor Connector
Type Singlemode
2U FC ultra polish
2A FC angled polish
7U SC ultra polish
7A SC angled polish
LA LX.5
®
angled polish
00 Bare fiber
See pages 206-208 for specifications.
Number of Circuits
per VAM
1 1 circuit
2 2 circuits

3 3 circuits
Split Ratio
A 90/10
B 95/05
C 50/50
E 80/20
F 75/25
H 70/30
J 60/40
K 99/01
Module Style
B Cross-connect customer
premises
D Dual monitor cross-connect
G Dual monitor cross-connect
J Dual monitor
P Customer premises
R Single monitor cross-connect
Output Pigtail Length
199
6/04 • 1247379
MSO Market Solutions
www.adc.com • +1-952-938-8080 • 1-800-366-3891
199
Value-Added Module System
Monitor Module
Dual Monitor
Cross-Connect
D
Tx

Rx
Tx MON
Rx MON
Tx
Rx
SPLITTER
90%
10%
SPLITTER
90%
10%
Dual Monitor
Cross-Connect
G
Rx
Tx Mon
Rx Mon
Rx
Tx
1 x 2
1 x 2
Tx
Customer Premises
Monitor Module
B
SRC Rx
CUST MON
SRC MON
CUST Rx
SRC Tx

CUST Tx
1 x 2
SPLITTER A
1 x 2
SPLITTER B
XX%
XX%
XX%
XX%
CUST
MON
SRC
MON
SRC Rx
CUST Rx
CUST Tx
SRC Tx
1 x 2
SPLITTER
Customer Premises
Monitor Module
P
1 x 2
SPLITTER
XX.XX%
XX.XX%
XX.XX%
XX.XX%
Dual Monitor
Cross-Connect

J
Tx
Mon Tx
Mon Rx
Rx
Rx SRC
Tx SRC
1 x 2
1 x 2
Single Monitor
Cross-Connect
R
Tx
AI
Rx
Tx
A
Tx MON
A2
Rx
1 x 2
SPLITTER
XX.XX%
XX.XX%
Monitor Module for Next Generation Frames (NGF)