Tài liệu WAN CiscoView for the MGX 8220 pptx

170 West Tasman Drive
San Jose, CA 95134-1706
USA

Cisco Systems, Inc.
Corporate Headquarters
Tel:
800 553-NETS (6387)
408 526-4000
Fax: 408 526-4100
WAN CiscoView for the MGX 8220
Release 2.0
January 2000
Customer Order Number: DOC-40328=
Text Part Number: 78-6543-02
THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT
NOTICE. ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT
ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR
THEIR APPLICATION OF ANY PRODUCTS
THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE
INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU
ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT YOUR CISCO REPRESENTATIVE FOR A
COPY.
The Cisco implementation of TCP header compression is an adaptation of a program developed by the University of California, Berkeley (UCB) as
part of UCB’s public domain version of the UNIX operating system. All rights reserved. Copyright © 1981, Regents of the University of California.
NOTWITHSTANDING ANY OTHER WARRANTY HEREIN, ALL DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE
PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE-NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED
OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
NONINFRINGEMENT OR ARISING FROM A COURSE OF DEALING, USAGE, OR TRADE PRACTICE.
IN NO EVENT SHALL CISCO OR ITS SUPPLIERS BE LIABLE FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, OR INCIDENTAL
DAMAGES, INCLUDING, WITHOUT LIMITATION, LOST PROFITS OR LOSS OR DAMAGE TO DATA ARISING OUT OF THE USE OR

INABILITY TO USE THIS MANUAL, EVEN IF CISCO OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
Access Registrar, AccessPath, Any to Any, AtmDirector, Browse with Me, CCDA, CCDE, CCDP, CCIE, CCNA, CCNP, CCSI, CD-PAC, the Cisco logo,
Cisco Certified Internetwork Expert logo, CiscoLink, the Cisco Management Connection logo, the Cisco NetWorks logo, the Cisco Powered Network logo,
Cisco Systems Capital, the Cisco Systems Capital logo, Cisco Systems Networking Academy, the Cisco Systems Networking Academy logo, the Cisco
Technologies logo, ConnectWay, Fast Step, FireRunner, Follow Me Browsing, FormShare, GigaStack, IGX, Intelligence in the Optical Core, Internet
Quotient, IP/VC, Kernel Proxy, MGX, MultiPath Data, MultiPath Voice, Natural Network Viewer, NetSonar, Network Registrar, the Networkers logo,
Packet, PIX, Point and Click Internetworking, Policy Builder, Precept, ScriptShare, Secure Script, ServiceWay, Shop with Me, SlideCast, SMARTnet, The
Cell, TrafficDirector, TransPath, ViewRunner, Virtual Loop Carrier System, Virtual Service Node, Virtual Voice Line, VisionWay, VlanDirector, Voice
LAN, Wavelength Router, Wavelength Router Protocol, WaRP, WebViewer, Workgroup Director, and Workgroup Stack are trademarks; Changing the
Way We Work, Live, Play, and Learn, Empowering the Internet Generation, The Internet Economy, and The New Internet Economy are service marks; and
ASIST, BPX, Catalyst, Cisco, Cisco IOS, the Cisco IOS logo, Cisco Systems, the Cisco Systems logo, the Cisco Systems Cisco Press logo,
Enterprise/Solver, EtherChannel, EtherSwitch, FastHub, FastLink, FastPAD, FastSwitch, GeoTel, IOS, IP/TV, IPX, LightStream, LightSwitch, MICA,
NetRanger, Post-Routing, Pre-Routing, Registrar, StrataView Plus, Stratm, TeleRouter, and VCO are registered trademarks of Cisco Systems, Inc. or its
affiliates in the U.S. and certain other countries. All other trademarks mentioned in this document are the property of their respective owners. The use of the
word partner does not imply a partnership relationship between Cisco and any of its resellers. (9911R)
WAN CiscoView for the MGX 8220
Copyright © 2000, Cisco Systems, Inc.
All rights reserved.
CONTENTS

iii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Document Objectives
xxi
Audience
xx
Document Organization
xxii

Document Conventions
xx
Related Documentation
xxiii
CHAPTER

1
Product Overvie
1-1
General Description
1-1
Starting CiscoView and Displaying a Dev i c
1-1
Understanding the Displa
1-2
Printing a Displa
1-3
Changing CiscoView Operating Characteristi c
1-3
Organizing Management Informat i o
1-4
Categorizing Informati o
1-5
Displaying Configuration Informati o
1-5
Displaying Performance Informati o
1-5
Selecting a Car
1-5
Selecting a Line or P o r

1-5
Using Online He l
1-6
Jumps and pop- u p
1-6
Help Window Menu and Button Ba r
1-6
OverView and See Also Link
1-7
Exit Help
1-7
CHAPTER

2
Displaying and Configuring Node
2-1
Selecting a Devic
2-1
Node Dialo
2-1
Redundancy Info Dialo
2-3
LAN Interface Info Dialog
2-6
Serial Interface Info Dialog
2-8
Clock Source Info
2-10
Front Card Info
2-11

Contents
iv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER

3
Configuring ASC Card
3-1
Selecting the Card and Displaying Card Paramet e r
3-1
ASC Card Configuration Dial o
3-1
ASC Features
3-3
Disk Diagnostic
3-3
CHAPTER

4
Configuring 4-Port Cards
4-1
Selecting the Card and Displaying Card Paramet e r
4-1
Card Configuration Dialo
4-1
Service Module Featur e
4-3
ATM Port RealTime Counters

4-3
Lines
4-5
Ports
4-8
Card/Ports (FR) Dialog
4-8
Card/Ports (ATM) Dilao
4-11
Channel
4-13
Card/Channels (Circuit Emulation) Dialog
4-14
Card/Channels (FR) Dialog
4-16
Card/Channels (ATM) Dialo
4-18
CHAPTER

5
Configuring CESM Cards
5-1
Selecting the Card and Displaying Card Paramet e r
5-1
CESM Card Configurati o
5-1
CESM Service Module Feature
5-3
Lines
5-4

Ports
5-6
Channel
5-9
CHAPTER

6
Configuring FRSM 2CT3 Cards
6-1
Displaying Card Paramete r
6-1
FRSM-2CT3 Card Configuration Dia l o
6-1
Service Module Featur e
6-3
FR Port Realtime Counters
6-4
LCN Partition Ty p
6-7
Ports
6-8
Channel
6-10

Contents
v
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Card/Channels (FR
6-10

Card/Channels State Info (FR
6-15
Lines Configuration
6-16
Physical Line Config(dsx3)
6-17
dsx3 Physical Line Alarm Configurat i o
6-19
dsx3 Counte r
6-20
dsx3 Counters (1 o f 2
6-21
dsx3Counters (2 of 2
6-22
Channelized Line Configuration (ds x 1
6-24
Channelized Line Alarm Configuration (dsx1
6-25
Channelized Line RealTime Counters (dsx 1
6-29
Logical Port
6-30
Logical Port Config (FR Port s
6-31
FR Port RTCs
6-34
FR Port RTCs (CLLM
6-37
FR Port Resource Partiti o
6-38

Logical Ports (Service Queue
6-39
CHAPTER

7
Configuring FRSM-2T3/E3 Cards
7-1
Displaying Card Paramete r
7-1
FRSM-2T3/E3 Card Configuration Di a l o
7-1
FRSM-2T3/E3 Service Module Feature
7-3
FR Port Realtime Counters
7-4
LCN Partition Ty p
7-7
Ports
7-8
Channel
7-10
Card/Channels (FR
7-10
Card/Channels State Info (FR
7-15
Lines Configuration
7-16
dsx3 Lines Configuratio
7-16
Physical Line Configuration (dsx3

7-17
dsx3 Physical Line Alarm Configurat i o
7-19
dsx3 Counte r
7-21
Configuring Logical Ports
7-24
FRSM Logical Ports Configuratio
7-25
FR Port RTCs
7-28

Contents
vi
WAN CiscoView for the MGX 822
Release 2.0, January 2000
FR Port RTCs (CLLM
7-31
FR Port Resource Partiti o
7-32
Logical Ports (Service Queue
7-33
CHAPTER

8
Configuring FRSM 8-Port Cards
8-1
Selecting the Card and Displaying Card Paramet e r
8-1
FRSM 8-Port Card Configuration Dialo

8-1
FRSM Service Module Feature
8-3
FR Port RealTime Counter
8-4
Lines
8-6
Ports
8-9
Channel
8-12
CHAPTER

9
Configuring FRSM-HS1 Cards
9-1
Selecting the Card and Displaying Card Paramet e r
9-1
FRSM-HS1 Port Card Configuration Dialo
9-1
FRSM-HS1 Service Module Feature
9-3
FR Port RealTime Counter
9-3
Ports
9-6
Channel
9-7
CHAPTER

10
Configuring FRSM HS1/B Cards
10-1
Displaying Card Paramete r
10-
FRSM HS1/B Ca r
10-
Service Module Featur e
10-4
FR Port Realtime Counters
10-4
LCN Partition Ty p
10-
Card/Ports (X.21/V.3 5
10-
Channel
10-9
Lines Configuration
10-13
Physical Line Config (X.21/V.3 5
10-1
Physical Line Alarm Config (X.21/V.35)
10-1
Logical Port
10-1
Logical Port Config (X.21/V.35 Ports
10-1
FR Port RTCs
10-2
FR Port RTCs (CLLM

10-2

Contents
vii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
FR Port Resource Partition Conf i
10-2
CHAPTER

11
Configuring FRSM-HS2 Cards
11-1
Selecting the Card and Displaying Card Paramet e r
11-1
FRSM-HS2 Card Configuration Dial o
11-1
FRSM-HS2 Service Module Feature
11-
FR Port RealTime Counter
11-4
Lines
11-6
Ports
11-8
CHAPTER

12
Configuring IMATM Cards
12-1

Selecting the Card and Displaying Card Paramet e r
12-1
IMATM Card Configuration Dialo
12-1
IMATM Service Module Features
12-
IMATM Clock Configuration
12-
IMATM Port Configuration
12-5
CHAPTER

13
Configuring AUSM Cards
13-1
Selecting the Card and Displaying Card Paramet e r
13-1
AUSM Card Configuration Dialo
13-
AUSM Service Module Featu r e
13-3
ATM Port RealTime Counters Configuration
13-4
Lines
13-6
Configuring dsx1 Line
13-
Configuring dsx3 Line
13-
Ports

13-1
Card/Ports (ATM)
13-1
Card/Ports (Forum Compliant IMA Groups)
13-1
Channel
13-1
CHAPTER

14
Configuring BNM-T3/E3 Cards
14-1
Selecting the Card and Displaying Card Paramet e r
14-1
BNM-T3/E3 Card Configuration Dia l o
14-2
Lines
14-3

Contents
viii
WAN CiscoView for the MGX 822
Release 2.0, January 2000
CHAPTER

15
Configuring BNM-155 Cards
15-1
Selecting the Card and Displaying Card Paramet e r
15-1

BNM-155 Card Configuration Dia l o
15-1
Lines
15-3
CHAPTER

16
Configuring SRM 3T3 Cards
16-
Selecting the Card and Displaying Card Paramet e r
16-1
SRM 3T3 Card Configuration Dialog
16-1
Lines
16-3
CHAPTER

17
Displaying and Configuring Li n e
17-1
Selecting a Lin
17-1
Configuring DSX1 Line
17-1
Physical Line Configuration (DSX1
17-2
DSX1 Physical Line Alarm Configuratio
17-4
DSX1 Line RealTime Counters
17-

DSX1 PLCP Configuration
17-6
DSX3 Lines Configuratio
17-6
Physical Line Configuration (dsx3)
17-
DSX3 Physical Line Alarm Configuratio
17-8
DSX3 Counters
17-1
DSX3 PLCP Alarm Configuration
17-12
Channelized Line Configurati o
17-1
Channelized Line Configuration (DSX1
17-1
Channelized Line Configuration (DSX3
17-1
X21 Lines Configuration Dial o g
17-16
X21 Line Config
17-17
X21 Physical Line Alarm Configurati o
17-1
Sonet Lines Configura t i o
17-1
Physical Line Config (Sonet)
17-1
Physical Line Alarm Config (Sonet
17-2

Sonet Counters
17-21
ATM Line
17-2
SRM Line Configuratio
17-2
SRM Counters
17-2
SRM Line Distribution (SRM 3T3)
17-2

Contents
ix
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Logical Port
17-2
CESM Ports Configuration
17-2
Logical Port Config (CESM
17-2
FRSM Ports Configurati o
17-2
FRSM Logical Ports Configuratio
17-25
FR Port RTCs
17-2
FR Port RTCs (CLLM
17-2
X21 Frame Ports Configuratio

17-2
CHAPTER

18
Monitoring Li n e
18-1
Selecting a Lin
18-1
Monitoring DSX1 Counte r
18-1
Monitoring DSX3 Counte r
18-3
Monitoring DSX3 PLCP Count e r
18-6
Monitoring Logical Port
18-
FR Port Monitor (RCV) Counter
18-
FR Port Monitor (XMT) Counte r
18-8
FR Port Monitor (ILMI/CLLM) Count e r
18-
ATM-ILMI Port RealTime Counters
18-1
ATM RealTime Counters
18-10
Channel Monitorin
18-1
FRSM Channel Counters (R C V
18-1

FRSM Channel Counters (X M T
18-1
Channel SAR Counte r
18-14
CESM Channel Counte r
18-1
Monitoring ILMI
18-1
Monitoring IMA Group Count e r
18-1
Monitoring BNM Counter
18-17
Monitoring SRM Counter
18-17

Contents
x
WAN CiscoView for the MGX 822
Release 2.0, January 2000
FIGURES

xi
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Figure 1-1 CiscoView—Main Window
1-1
Figure 1-2 CiscoView—Open Device Window
1-1
Figure 2-1 Node Dialog
2-2

Figure 2-2 Redundancy Info Dialog
2-3
Figure 2-3 Create Dialog
2-5
Figure 2-4 LAN Interface Info Dialog
2-6
Figure 2-5 Serial Interface Info Dialog
2-8
Figure 2-6 Front Card Info Table
2-11
Figure 4-1 Service Module Features
4-3
Figure 4-2 ATM Port RealTime Counters Configuration
4-4
Figure 4-3 Lines Dialog (dsx1)
4-6
Figure 4-4 Card/Ports (FR) Dialog
4-9
Figure 4-5 Card/Ports (ATM) Dialo
4-11
Figure 4-6 Channels Table
4-14
Figure 4-7 FRSM Channels Dialog
4-16
Figure 4-8 AUSM Channels Dialog
4-19
Figure 5-1 CESM Service Module Features
5-3
Figure 5-2 Lines Dialog (dsx1)
5-4

Figure 5-3 CESM Ports Table
5-7
Figure 5-4 CESM Channels Table
5-9
Figure 6-1 Card Configuration Dialog
6-2
Figure 6-2 FRSM Service Module Features Dialog
6-3
Figure 6-3 FR Port Realtime Counters Dialog
6-4
Figure 6-4 LCN Partition Type Dialog
6-7
Figure 6-5 Card/Ports Dialog
6-8
Figure 6-6 Card/Channels (FR) Dialog
6-10
Figure 6-7 Physical Line Config (dsx3) Dialog
6-17
Figure 6-8 Physical Line Alarm Config (dsx3) Dialog
6-19
Figure 6-9 dsx3 Counters (1 of 2) Dialog
6-21
Figure 6-10 dsx3 Counters (2 of 2)
6-22
Figure 6-11 Channelized Line Config (dsx1) Dialog
6-24

Figures
xii
WAN CiscoView for the MGX 822

Release 2.0, January 2000
Figure 6-12 Channelized Line Alarm Config (dsx1) Dialog
6-25
Figure 6-13 Channelized Line RealTime Counters (dsx1) Dialog
6-30
Figure 6-14 Logical Port Config (FR) Dialog
6-31
Figure 6-15 FR Port RTCs Dialog
6-34
Figure 6-16 FR Port RTCs (CLLM) Dialog
6-37
Figure 6-17 FR Port Resource Partition Config Dialog
6-38
Figure 6-18 Logical Ports (Service Queue) Dialog
6-39
Figure 7-1 Card Configuration Dialog
7-2
Figure 7-2 FRSM-2T3/E3 Service Module Features Dialog
7-3
Figure 7-3 FR Port Realtime Counters Table
7-4
Figure 7-4 LCN Partition Type Dialog
7-7
Figure 7-5 FRSM-2T3/E3 Ports Dialog
7-8
Figure 7-6 FRSM-2T3/E3 Channels Dialo
7-10
Figure 7-7 Physical Line Config (dsx3) Dialog
7-17
Figure 7-8 Physical Line Alarm Config (dsx3) Dialog

7-19
Figure 7-9 dsx3 Counters (1 of 2) Dialog
7-21
Figure 7-10 dsx3 Counters (2 of 2) Dialog
7-23
Figure 7-11 Logical Port Config (FR) Dialog
7-25
Figure 7-12 FR Port RTCs Dialog
7-28
Figure 7-13 FR Port RTCs (CLLM) Dialog
7-31
Figure 7-14 FR Port Resource Partition Config Dialog
7-32
Figure 7-15 Logical Ports (Service Queue) Dialog
7-33
Figure 8-1 FRSM Service Module Features Dialog
8-3
Figure 8-2 FR Port RealTime Counters Table
8-4
Figure 8-3 FRSM Lines Dialog
8-6
Figure 8-4 FRSM Ports Dialog
8-10
Figure 8-5 FRSM Channels Dialog
8-12
Figure 9-1 FRSM-HS1 Service Module Features Dialog
9-3
Figure 9-2 FR Port RealTime Counters Table
9-3
Figure 9-3 FRSM-HS1 Ports Dialog

9-6
Figure 9-4 FRSM-HS1 Channels Dialog
9-7
Figure 10-1 Card Configuration Dialog
10-2
Figure 10-2 Service Module Features Dialog
10-4
Figure 10-3 FR Port Realtime Counters Table
10-4
Figure 10-4 LCN Partition Type Dialog
10-7

Figures
xiii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Figure 10-5 Card/Ports (X.21/V.35) Dialog
10-8
Figure 10-6 Card/Channels Config Dialog
10-9
Figure 10-7 Physical Line Config (X.21/V.35) Dialog
10-1
Figure 10-8 Physical Line Alarm Config (X.21/V.35) Dialog
10-1
Figure 10-9 Logical Port Config (FR) Dialog
10-17
Figure 10-10 FR Port RTCs Dialog
10-2
Figure 10-11 FR Port RTCs (CLLM) Dialog
10-23

Figure 10-12 FR Port Resource Partition Config Dialog
10-2
Figure 11-1 FRSM-HS2 Service Module Features Dialog
11-3
Figure 11-2 FR Port RealTime Counters Table
11-4
Figure 11-3 FRSM-HS2 Ports Dialog
11-
Figure 13-1 AUSM Service Module Features Dialog
13-3
Figure 13-2 ATM Port RealTime Counters Configuration
13-4
Figure 13-3 AUSM Lines Dialog (dsx1)
13-
Figure 13-4 Card/Ports (ATM) Dialog
13-11
Figure 13-5 Card/Ports (Forum Compliant IMA Groups) Dialog
13-1
Figure 13-6 AUSM Channels Dialog
13-15

Figures
xiv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
TABLES

xv
WAN CiscoView for the MGX 8220
Release 2.0, January 200

Tabl e1-1 LED Colors
1-2
Tabl e1-2 CiscoView Quick Guidelines
1-6
Tabl e2-1 Node Dialog Paramet e r
2-2
Tabl e2-2 Redundancy Info Dialog Paramet e r
2-4
Tabl e2-3 Redundancy Info Create Window Parameters
2-5
Tabl e2-4 LAN Interface Info Dialog Paramete r
2-7
Tabl e2-5 Serial Interface Info Table Paramet e r
2-8
Tabl e2-6 Clock Source Info Dialog Parameter
2-10
Tabl e2-7 Front Card Info Dialog Paramete r
2-11
Tabl e3-1 ASC Card Configuration Dialog Parameter
3-1
Tabl e3-2 ASC Features Dialog Parameters
3-3
Tabl e3-3 Disk Diagnostics Dialog Paramet e r
3-3
Tabl e4-1 ASC Card Configuration Dialog Parameter
4-1
Tabl e4-2 Service Module Features Dialog Parameters
4-3
Tabl e4-3 ATM Port RealTime Counters Dialog Paramete r
4-4

Tabl e4-4 Lines Dialog Parameters (dsx 1
4-6
Tabl e4-5 Ports Dialog Parameter
4-9
Tabl e4-6 Card/Ports (ATM) Dialog Parameters
4-12
Tabl e4-7 Channels Table Paramet e r
4-14
Tabl e4-8 Channels Dialog Paramet e r
4-16
Tabl e4-9 AUSM Channels Dialog Parameter
4-19
Tabl e5-1 Card Configuration Dialog Paramete r
5-1
Tabl e5-2 CESM Service Module Features Dialog Parameters
5-3
Tabl e5-3 CESM Lines Dialog Parameters (dsx1
5-4
Tabl e5-4 CESM Ports Table Paramete r
5-7
Tabl e5-5 CESM Channels Table Paramet e r
5-9
Tabl e6-1 Card Configuration Dialog Paramete r
6-2
Tabl e6-2 FRSM Service Module Features Dialog Paramet e r
6-3
Tabl e6-3 FR Port Realtime Counters Dialog Parameters
6-5
Tabl e6-4 Card/Ports Dialog Parameter
6-8

Tabl e6-5 Cards/Channels (FR) Dialog Paramet e r
6-11

Tables
xvi
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Tabl e6-6 Card/Channels State Info (FR) Dialog Paramete r
6-15
Tabl e6-7 Physical Line Config (dsx3) Parameter
6-17
Tabl e6-8 Physical Line Alarm Config (dsx3) Parameter
6-19
Tabl e6-9 dsx3 Counters (1 of 2) Paramet e r
6-21
Tabl e6-10 dsx3 Counters (2 of 2) Paramet e r
6-23
Tabl e6-11 Channelized Line Config(dsx1) Dialog Parameters
6-24
Tabl e6-12 Channelized Line Alarm Config (dsx1) Dialog Paramet e r
6-26
Tabl e6-13 Channelized Line RealTime Counters (dsx1) Dialog Parameters
6-30
Tabl e6-14 Logical Port Config (FR) Dialog Paramete r
6-31
Tabl e6-15 FR Port RTCs Dialog Paramete r
6-35
Tabl e6-16 FR Port RTCs (CLLM) Dialog Parameters
6-37
Tabl e6-17 FR Port Resource Partition Config Dialog Parameter

6-38
Tabl e6-18 Logical Ports (Service Queue) Dialog Paramete r
6-39
Tabl e7-1 Card Configuration Dialog Paramete r
7-2
Tabl e7-2 FRSM-2T3/E3 Service Module Features Dialog Parameter
7-4
Tabl e7-3 FR Port Realtime Counters Dialog Paramete r
7-4
Tabl e7-4 LCN Partition Type Dialog Parameters
7-7
Tabl e7-5 Ports Dialog Parameter
7-8
Tabl e7-6 Card/Channels (FR) Dialog Paramete r
7-11
Tabl e7-7 Card/Channels State Info (FR) Dialog Paramete r
7-15
Tabl e7-8 Physical Line Config (dsx3) Parameter
7-17
Tabl e7-9 Physical Line Alarm Config (dsx3) Parameter
7-19
Tabl e7-10 dsx3 Counters (1 of 2) Paramet e r
7-21
Tabl e7-11 dsx3 Counters (2 of 2) Paramet e r
7-23
Tabl e7-12 Logical Port Config (FR) Dialog Paramete r
7-26
Tabl e7-13 FR Port RTCs Dialog Paramete r
7-29
Tabl e7-14 FR Port RTCs (CLLM) Dialog Paramete r

7-31
Tabl e7-15 FR Port Resource Partition Config Dialog Parameter
7-32
Tabl e7-16 Logical Ports (Service Queue) Dialog Paramete r
7-33
Tabl e8-1 Card Configuration Dialog Paramete r
8-1
Tabl e8-2 FRSM Service Module Features Dialog Parameters
8-3
Tabl e8-3 FR Port RealTime Counters Dialog Paramete r
8-4
Tabl e8-4 Lines Dialog Parameter
8-7
Tabl e8-5 Ports Dialog Parameter
8-10
Tabl e8-6 Channels Dialog Paramet e r
8-13

Tables
xvii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Tabl e9-1 Card Configuration Dialog Parameters
9-1
Tabl e9-2 FRSM-HS1 Service Module Features Dialog Parameters
9-3
Tabl e9-3 FR Port RealTime Counters Dialog Paramete r
9-4
Tabl e9-4 X21/HSSI Ports Dialog Parameters
9-6

Tabl e9-5 Channels Dialog Paramet e r
9-7
Tabl e10-1 Card Configuration Dialog Paramete r
10-3
Tabl e10-2 Service Module Features
10-4
Tabl e10-3 FR Port Realtime Counters Dialog Paramete r
10-
Tabl e10-4 Card/Ports (X.21/V.35) Dialog Paramet e r
10-8
Tabl e10-5 Card/Channels Dialog Paramet e r
10-9
Tabl e10-6 Physical Line Config (X.21/V.35) Dialog Paramet e r
10-1
Tabl e10-7 Physical Line Alarm Config (X21/HSSI/V.35) Dialog Paramete r
10-1
Tabl e10-8 Logical Port Config (FR) Dialog Paramete r
10-1
Tabl e10-9 FR Port RTCs Dialog Paramete r
10-2
Tabl e10-10 FR Port RTCs (CLLM) Dialog Paramete r
10-2
Tabl e10-11 FR Port Resource Partition Config Dialog Parameter
10-2
Tabl e11-1 Card Configuration Dialog Paramete r
11-1
Tabl e11-2 FRSM-HS2 Service Module Features Dialog Parameters
11-3
Tabl e11-3 FR Port RealTime Counters Dialog Paramete r
11-

Tabl e11-4 Card/Lines (X21-HSSI) Dialog Parameters
11-6
Tabl e11-5 Ports Dialog Parameter
11-8
Tabl e12-1 Card Configuration Dialog Paramete r
12-1
Tabl e12-2 IMATM Service Module Features Dialog Parameters
12-3
Tabl e12-3 IMATM Clock Configuration Parameter
12-
Tabl e12-4 IMATM Port Configuration
12-5
Tabl e13-1 Card Configuration Dialog Paramete r
13-1
Tabl e13-2 AUSM Service Module Features Dialog Parameters
13-
Tabl e13-3 ATM Port RealTime Counters Dialog Paramete r
13-4
Tabl e13-4 Lines Dialog Parameter
13-6
Tabl e13-5 AUSM dsx3 Lines Table Paramet e r
13-8
Tabl e13-6 Card/Ports (ATM) Dialog Parameters
13-11
Tabl e13-7 Card/Ports (Forum Compliant IMA Groups) Dialog Parameters
13-1
Tabl e13-8 AUSM Channels Dialog Parameter
13-1
Tabl e14-1 Card Configuration Dialog Paramete r
14-2

Tabl e14-2 BNM dsx3 Lines Table Paramete r
14-

Tables
xviii
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Tabl e15-1 BNM-155 Card Configuration Dialo
15-1
Tabl e15-2 Card Configuration Dialog Paramete r
15-3
Tabl e16-1 Card Configuration Dialog Paramete r
16-1
Tabl e16-2 SRM3T3 dsx3 Lines Table Paramete r
16-3
Tabl e17-1 DSX1 Line Configuration Dialog Parameter
17-
Tabl e17-2 DSX1 Physical Line Alarm Configuration Paramet e r
17-4
Tabl e17-3 DSX1 Line RealTime Counters Parameters
17-5
Tabl e17-4 DSX1 PLCP Configuration Parameters
17-6
Tabl e17-5 DSX3 Physical Line Configuration(dsx3) Parameter
17-
Tabl e17-6 DSX3 Physical Line Alarm Configuration Paramet e r
17-8
Tabl e17-7 DSX3 Counters Parameters (1 of 2
17-1
Tabl e17-8 DSX 3 Counters Parameters (2 of 2

17-1
Tabl e17-9 DSX3 PLCP Alarm Configuration Parameter
17-12
Tabl e17-10 Channelized Line Config (dsx1) Dialog Paramet e r
17-1
Tabl e17-11 DSX3 Channelized Line Configuration Parameter
17-1
Tabl e17-12 X21 Lines Configuration Paramet e r
17-1
Tabl e17-13 X21 Physical Line Alarm Configuration Dialog Parameter
17-18
Tabl e17-14 Sonet Line Configuration Paramet e r
17-1
Tabl e17-15 Sonet Line Configuration Paramet e r
17-2
Tabl e17-16 Sonet Counters Configuration Parameter
17-2
Tabl e17-17 ATM Line Configuration Paramete r
17-2
Tabl e17-18 SRM Counters Dialog Parameters
17-22
Tabl e17-19 SRM Line Distribution (SRM3T3) Dialog Parameters
17-2
Tabl e17-20 Logical Ports Parameters CES
17-2
Tabl e17-21 Logical Ports Parameter
17-2
Tabl e17-22 FR Port RTCs Dialog Paramete r
17-2
Tabl e17-23 FR Port RTCs (CLLM) Dialog Parameters

17-2
Tabl e17-24 X21 Logical Ports Parameters
17-2
Tabl e18-1 DSX1 Counters (1 of 2) Dialog Parameter
18-
Tabl e18-2 DSX1 Counters (2 of 2) Parameter
18-
Tabl e18-3 DSX3 Counters Dialog Parameters (1 of 2
18-
Tabl e18-4 dsx3Counters Dialog Parameters (2 o f 2
18-
Tabl e18-5 DSX3 PLCP Counters Dialog Parameters (1 0f 2)
18-6
Tabl e18-6 DSX3 PLCP Counters Dialog Parameters (2 o f 2
18-
Tabl e18-7 FR Port Monitor (RCV) Counter
18-8

Tables
xix
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Tabl e18-8 FR Port Monitor (XMT) Counte r
18-8
Tabl e18-9 FR Port Monitor (ILMI/CLLM) Count e r
18-9
Tabl e18-10 ATM-ILMI Port RealTime Counters Dialog Parameters
18-10
Tabl e18-11 ATM RealTime Counters Dialog Parameter
18-1

Tabl e18-12 FRSM Channel Counters (RCV) Dialog Paramet e r
18-12
Tabl e18-13 FRSM Channel Counters (XMT) Dialog Parameter
18-1
Tabl e18-14 Channel SAR Counters Dialog Paramete
18-14
Tabl e18-15 CESM Channel Counte r
18-1
Tabl e18-16 ATM Lines Dialog Parameters
18-15
Tabl e18-17 ILMI Dialog Parameters
18-1
Tabl e18-18 IMA Group Counters Dialog Parameters
18-1
Tabl e18-19 BNM Dialog Parameters (1 of 2)
18-17
Tabl e18-20 BNM Line Counters Dialog Parameters (2 of 2)
18-1
Tabl e18-21 SRM Counters Dialog Parameters
18-17

Tables
xx
WAN CiscoView for the MGX 822
Release 2.0, January 2000
xxi
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Preface
This section discusses the objectives, audience, organization, and conventions of the

WAN CiscoVie
for the MGX 8220 User Guide.
Cisco documentation and additional literature are available in a CD-ROM package, which ships with
your product. The Documentation CD-ROM, a member of the Cisco Connection Family, is updated
monthly. Therefore, it might be more up to date than printed documentation. To order additional copies
of the Documentation CD-ROM, contact your local sales representative or call customer service. The
CD-ROM package is available as a single package or through an annual subscription. You can also
access Cisco documentation on the World Wide Web at ,
, or .
Document Objectives
This publication provides instructions for using WAN CiscoView for the MGX 8220. WAN CiscoView
is a GUI-based device management software application that allows you to:
•
display a graphical representation of the network device
•
display configuration and performance information
•
perform minor configuration tasks
•
perform minor troubleshooting tasks
Audience
This publication is intended for anyone who operates or manages a WAN and has a general
understanding of data communications concepts, some knowledge of UNIX, and knowledge of the
interfaces used by devices connected to their WAN.
xxii
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Preface
Document Organization
Document Organization

This publication is organized as follows:
Chapter 1, “Product Overview” presents an overview of WAN CiscoView.
Chapter 2, “Displaying and Configuring Nodes,” provides instructions for displaying and configuring
node information on the WAN CiscoView interface.
Chapter 3, “Configuring ASC Cards,” provides instructions for displaying and configuring ASC
information on the WAN CiscoView interface.
Chapter 4, “Configuring 4-port Cards,” provides instructions for displaying and configuring 4-port
information on the WAN CiscoView interface.
Chapter 5, “Configuring CESM Cards,” provides instructions for displaying and configuring CESM
information on the WAN CiscoView interface.
Chapter 6, “Configuring FRSM-2CT3 Cards,” provides instructions for displaying and configuring
FRSM-2CT3 information on the WAN CiscoView interface.
Chapter 7, “Configuring FRSM-2T3/E3 Cards,” provides instructions for displaying and configuring
FRSM-2T3/E3 information on the WAN CiscoView interface.
Chapter 8, “Configuring FRSM 8-port Cards,” provides instructions for displaying and configuring
FRSM 8-port card information on the WAN CiscoView interface.
Chapter 9, “Configuring FRSM-HS1 Cards,” provides instructions for displaying and configuring
FRSM-2CT3 information on the WAN CiscoView interface.
Chapter 10, “Configuring FRSM-HS1/B Cards,” provides instructions for displaying and configuring
FRSM-HS1/B information on the WAN CiscoView interface.
Chapter 11, “Configuring FRSM-HS2 Cards,” provides instructions for displaying and configuring
FRSM-HS2 information on the WAN CiscoView interface.
Chapter 12, “Configuring IMATM Cards,” provides instructions for displaying and configuring
IMATM information on the WAN CiscoView interface.
Chapter 13, “Configuring AUSM Cards,” provides instructions for displaying and configuring AUSM
card information on the WAN CiscoView interface.
Chapter 14 “Configuring BNM T3/E3 Cards,” provides instructions for displaying and configuring
BNM T3/E3 information on the WAN CiscoView interface.
Chapter 15 “Configuring BNM 155 Cards,” provides instructions for displaying and configuring BNM
155 information on the WAN CiscoView interface.

Chapter 16, “Configuring SRM 3T3 Cards,” provides instructions for displaying and configuring SRM
3T3 information on the WAN CiscoView interface.
Chapter 17, “Displaying and Configuring Lines,” provides instructions for displaying and configuring
line information on the WAN CiscoView interface.
Chapter 18, “Monitoring Lines,” provides instructions for monitoring line information on the WAN
CiscoView interface.
xxiii
WAN CiscoView for the MGX 8220
Release 2.0, January 200
Preface
Document Conventions
Document Conventions
Command descriptions use these conventions:
•
Commands and keywords are in
boldface
.
•
Elements in square brackets ([ ]) are optional.
Examples use the following conventions:
•
Terminal sessions and information the system displays are printed in
screen
font.
•
Information you enter is in
boldface screen
font or
boldface
font.

Note
Means
reader take note
. Notes contain helpful suggestions or references to material not
covered in the publication.
Related Documentation
The following documentation may be useful if you are using WAN CiscoView for the MGX 8220:
•
Release notes—Describe new features and special considerations (including known software bugs)
and provide software upgrade procedures.
•
On-line help.
xxiv
WAN CiscoView for the MGX 822
Release 2.0, January 2000
Preface
Related Documentation
CHAPTER

1-1
WAN CiscoView for the MGX 8220
Release 2.0, January 200
1
Product Overview
General Description
WAN CiscoView is a GUI-based device management software application that allows you to
•
display a graphical representation of the network device
•
display configuration and performance information

•
perform minor configuration tasks
•
perform minor troubleshooting tasks
Starting CiscoView and Displaying a Device
When you start the CiscoView application, the CiscoView—Main window opens. (See Figur e1-1.)
Figur e1-1 CiscoView—Main Window
Step 1
Select
File>Open Device
(or type Ctrl+O) from the CiscoView—Main window. The CiscoView—Open
Device window appears. (See Figure 1-2.)
Figur e1-2 CiscoView—Open Device Window