Au77s-How to make program
深深深深
深深深深深深深深深深深深深
Shenzhen Axxon Automation Co.,Ltd.
深深深深深深深深深深深深深深 3C
Unit CD/3F 深 Tianji Building Tianan Cyber Park
Futian District 深 Shenzhen China 518040
Tel: +86-755-83586066
Fax:+86-755-83583279
How to make a program
Create the fiducial point
Create the sub template
Set the mark
Set the dispensing parameter
Place the template under the main
program
Teach the program
www.axxonauto.com
Set the fiducial point
Fisrt Step 深
Click the Program Edit button
enter the program teaching window.
Second Step 深
Click the new folder
button to set the reference point will appear a
figure as the left image.
Third Step 深
Click teaching button
will appear the visual teaching window.
www.axxonauto.com
Set the fiducial point
Fourth Step :
Move to the place that you want to set
by the direction button and make the
view clear
then click
ok .
After this step click
save button
www.axxonauto.com
Save Program
Click the icon
to save the program.
Enter the file name that you want and click save button.
www.axxonauto.com
Create sub template name
Click the icon
to create a sub template as the below window.
Then enter the name and click ok.
www.axxonauto.com
Set the mark
First step:
Select the present sub template aa as the left
image.
Second step:
Second step:
Click the icon
will appear the mark setting
window.Select the pattern aa.
Select the mark mode means the number of
mark,then click next.
www.axxonauto.com
Set the mark
Third Step:
Adjust the light and the Z axis to make the view clear
and click Teach and Next as the left window.
Fourth Step:
Click the icon
the test
and select the mark then click
button,when the lower left corner
indicator become green,click Next.Set the second
mark as the first one.
www.axxonauto.com
Set the mark-similarity
This value means that the mark point must 60% similarity as the setted one so the mark can be
passed.
Usually the value is biger than 60%.
www.axxonauto.com
Teach the program
First Step:
Select the sub template
aa,then click the icon
to start teach program.
www.axxonauto.com
Teach the program-Different pattern
Dot:Under this pattern,the valve will dispense depend on the dot dispense parameter.
Line:The valve will constantly dispense until encounter the ValveOff command.And it will constantly dispense according to
the open and close valve time. This pattern mainly used for encapsulation without strict process requiremt.
For example:
Line:1,(95.148,102.912,28.931),ValveOn
Line:1,(80.452,102.570,28.931),ValveOn
Line:1,(95.148,100.632,28.931),ValveOn
Line:1,(80.406,100.120,28.931),ValveOn
Line:1,(80.452,97.748,28.931),ValveOn
Line:1,(95.148,98.838,28.931),ValveOff
www.axxonauto.com
Pattern-Linefix
Linefix:Equal distance dispensing pattern.
Every dot Dispenses equal volume of glue between the start and end point.The volume depends on the dispensing
parameter that you setted .It mainly used for underfill applicaiton.
For example 深
LineFix:1,(95.148,102.912,28.931),ValveOn LineFix:1,(80.452,102.570,28.931),ValveOff LineFix:1,
(95.148,100.632,28.931),ValveOn LineFix:1,(80.406,100.120,28.931),ValveOff
LineFix:1,(80.452,97.748,28.931),ValveOn
LineFix:1,(95.148,98.838,28.931),ValveOff
www.axxonauto.com
Pattern-linend
Linend 深 unequal distance dispensing pattern.
The motor's speed won't reduced when the valve moves to the dispensing position.
For example 深
LineEnd:1,(95.148,100.912,28.931),ValveOn LineEnd:1,(95.148,101.912,28.931),ValveOn LineEnd:1,
(95.148,104.912,28.931),ValveOn LineEnd:1,(95.148,110.912,28.931),ValveOn LineEnd:1,
(95.148,119.912,28.931),ValveOn LineEnd:1,(95.148,120.912,28.931),ValveOff
www.axxonauto.com
Place the template under
the main program
First Step:
Select the main interface
Second Step 深
Click the icon
will appear a window as the left.
Third Step:
Select the sub template aa and click locate,then the
camera will move to the first mark point.After clicking
teach and complete.
www.axxonauto.com
THANK YOU
2012 PPT FOR Axxon automation
深深深深
深深深深深深深深深深深深深
Shenzhen Axxon Automation Co.,Ltd.
深深深深深深深深深深深深深深 3C
Unit CD/3F 深 Tianji Building Tianan Cyber Park
Futian District 深 Shenzhen China 518040
Tel: +86-755-83586066
Fax:+86-755-83583279