Instructions for IC CPD (waterfall light)

IC-CPD Instructions


A、Parameters
Standards

IEC 62196-1 2014, IEC 62196-2 2014, IEC 61851-1 2017 IEC 62752 2016

Rated Voltage

220V AC（95-270 for North American market）

Rated Current

8A-10A-13A-16A/16A-25A-32A

Operating Freqyebcy 50Hz
Insulation Resistance

＞10MΩ

Level of Pretection

IC-CPD IP67,Vehicle Connector IP54

Contact Resistance

≤0.5mΩ

Insection&Extraction
Force

Operating
Temperature

≤100N
-40℃～+50℃

Storing Temperature

-40℃～+80℃

Operating Humidity

5%～95RH

weight

2.1kg

B、Safety Informations
Thanks for using adjustable IC-PCD，please read instructions carefully before using
the product in order to help you use the product correctly.
Symbol：

Caution

The symbol means: In the case of may or some extent endanger the safety of personal
and property or damage the product facilities, give a reminder to avoid accidents
Symbol：

Warning

The symbol means：In the case of seriously endangering personal and property safety
or damage to product facilities, prohibition instructions are given to avoid serious
consequences


Caution
 The product should avoid to immerse in water as far as possible. it should be
above 0.75m away from the ground in charging
 Do not tramp, pull, bend, knot and other rough actions on vehicle connector
and cable
 The product is a precision integrated circuit equipment, to avoid falling from
high place, heavy objects hit pressure and other behaviors
 The minimum operating temperature of the product is -40℃
 The supply cable specification is 3*4mm2
 The surface label of this product is waterproof. Please do not tear the label
forcibly
Warning
 This product is only used in the environment with leakage protector at the
supply end
 If the cable is damaged, do not use this product
 The product is only used for electric vehicles
 The product must be use in well grounded
 Do not use extra wire or switch plug in charging
 It is strictly prohibited to touch the internal conductive unit of the vehicle
connector with fingers
 It is strictly prohibited to disassemble and repair

C、Caution

●

Ensure the charging equipment, charging interface, cable, IC-CPD, wires and plug
surface without damage, rust and other abnormal conditions before charging

●

When the surface of the supply plug,vehicle connector, IC-CPD damp or stained,
please wipe it with a dry and clean cloth under the condition of power failure to
ensure that the product can be used normally

●

Before charging, please make sure that the supply plug is consistent with the
specification and model of the supply socket

●

In charging status, the IC-CPD should be placed in a clean and tidy space to
ensure that the cables are neatly and placed without folding or winding

●

Do not use this product in the environment of corrosive liquid, flammable dust,
flammable materials, etc

1、

D、Charging Operation Steps

1、First of all, make ture the gounding function of power soket is well done
2、To check whether the local voltage is consistent with the rated voltage
3、Plug into power supply,the LED will power on,the equipment start to selfinspection,it will be for 5 seconds.then you can see the charging interface

Self-inspection interface

Charging interface

4、Current Setting
A. When the blue waterfall light is on(not blinking),Long press function switch
3 seconds in charging interface.the function interface is on. two options you


can see.

Function interface

Power option interface

B. Short press function switch ,choose power option(the arrow is here ).
C. Long press function switch(3 seconds),the currents interface will be on

8A Current

16A Current

D. Short press function switch,the current will be charged.choose the current
that you want(there are 4 options for 16A equipment;there are 3 options
for 32A equipment)
E. Long press function switch(3 seconds),the screen will be back to charging

interface.the current setting finished
F. Insert the vehicle connector to vehicle inlet.the waterfall light turns blue to
green(blinking means charging,always on means charger finished)
5、Appointment charging Setting
A. When the blue waterfall light is on(not blinking),Long press function switch
3 seconds in charging interface.the function interface is on. two options you
can see.


Function interface

Time option interface

B. Short press function switch ,choose time option(the arrow is here ).
C. Long press function switch(3 seconds),the time interface will be on

No time setting

Finished time setting

D. Short press function switch, set the time that you want(one press one
hour,12 hours can be set)
F. Stay the time interface on. insert the vehicle connector to vehicle inlet.the
waterfall light turns blue to green.start to charge

E、Waterfall light and Screen status Description

Waterfall light

Screen

Vehicle connector status

Status

R/G/B Blinking

Self-inspection interface

Disconnected

Self-inspection

Blue on

Function interface

Disconnected

Standby

Function interface/setting
Blue on

Current setting
Disconnected

interface

Current setting

Green blinking

Function interface

Connected

Charging

Green on

Function interface

Connected

Charger finished


Red on

Earth Protection

Connected

Charging fault

Red on

Overvoltage Proteciton

Connected

Charging fault

Red on

Undervoltage Proteciton

Connected

Charging fault

Red on

Leak Protection

Connected

Charging fault

Red on

Overcurrent Protection

Connected

Charging fault

Red on

Overtemperature Protection

Connected

Charging fault

Red on

Relay Fault

Connected

Charging fault

Red on

Communication Failure

Connected

Charging fault

F、Dimension
1，

Product Length 5000mm

2，

Power cable is 500mm long（From plug to function box）

3，

Function box length,width,height:246.5*96*53.5mm

4，

Vehicle Connector cable is 4500mm long（From Connector to box）

5，

Packaging length,width,height:360*230*120mm

G、Product Name and Quantity

Serial Number

Name

Quantity

1

Adjustable IC-CPD

1

2

Instruction

1

3

Quality Certificate

1

4

Bag(Customer Requirement)

1


H、Warranty
1，

The pruducts have passed strict inspection.The products have a one-year
warranty,except for quality problems caused for improper operation.

2，

The products because of the user's improper handling, installation, improper
use and maintenance, or due to natural disasters of the general product
damage or scrap, are not within the scope of warranty