Toyota camry 2006 2011 instrument panel hệ thống bảng điều khiển trên toyota camry đời 2006 2011

INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–1
IP
INSTRUMENT PANEL SAFETY
PAD
PRECAUTION
1. PRECAUTION FOR VEHICLE WITH SRS AIRBAG
AND SEAT BELT PRETENSIONER
(a) Some operations in this section may affect the SRS
airbags. Prior to performing the corresponding
operations, read the SRS airbag NOTICE.
2. TABLE OF BOLT, SCREW AND NUT
Code Shape Size Parts No.
<A>
φ=6 mm
(0.24 in.)
Length=20 mm
(0.79 in.)
90119-06166
<B>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
93567-55016
<C>
φ=6 mm
(0.24 in.)
Length=20 mm
(0.79 in.)
90159-60610

<D>
φ=5 mm
(0.20 in.)
Length=15 mm
(0.59 in.)
90164-50034
<E>
φ=5 mm
(0.20 in.)
Length=20 mm
(0.79 in.)
93567-15020
<F>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
93567-15016
<G>
φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90119-06480
IP–2
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
<H>
φ=6 mm
(0.24 in.)

Length=18 mm
(0.71 in.)
90119-06428
<I>
φ=6 mm
(0.24 in.)
90179-06206
<J>
φ=6 mm
(0.24 in.)
Length=15 mm
(0.59 in.)
90119-06915
<K>
φ=8 mm
(0.31 in.)
Length=20 mm
(0.79 in.)
91633-60820
<L>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
90159-50305
<M>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)

93565-15016
<N>
φ=6 mm
(0.24 in.)
Length=18 mm
(0.71 in.)
90080-11664
<O>
φ=5 mm
(0.20 in.)
Length=16 mm
(0.63 in.)
90080-16097
<P>
φ=5 mm
(0.20 in.)
Length=22 mm
(0.87 in.)
90159-A0006
Code Shape Size Parts No.
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–3
IP
<Q>
φ=5 mm
(0.20 in.)
Length=15 mm
(0.59 in.)
90080-16106
<R>

φ=5 mm
(0.20 in.)
Length=20 mm
(0.79 in.)
90167-A0001
<S>
φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-11717
<T>
φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-11736
<U>
φ=6 mm
(0.24 in.)
90080-18071
<V>
φ=8 mm
(0.31 in.)
Length=20 mm
(0.79 in.)
90119-A0011
<W>
φ=5 mm
(0.20 in.)

Length=16 mm
(0.63 in.)
90159-A0021
<X>
φ=5 mm
(0.20 in.)
Length=14 mm
(0.55 in.)
90167-A0005
<Y>
φ=6 mm
(0.24 in.)
Length=15 mm
(0.59 in.)
90080-11545
Code Shape Size Parts No.
IP–4
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
<Z>
φ=6 mm
(0.24 in.)
90179-06115
<a>
φ=6 mm
(0.24 in.)
Length=20 mm
(0.79 in.)
90084-10051
<b>

φ=6 mm
(0.24 in.)
Length=16 mm
(0.63 in.)
90080-10171
Code Shape Size Parts No.
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–5
IP
COMPONENTS
STEERING COLUMN COVER
STEERING PAD
STEERING WHEEL ASSEMBLY
TURN SIGNAL SWITCH ASSEMBLY
WITH SPIRAL CABLE SUB-ASSEMBLY
LOWER NO. 2 STEERING
WHEEL COVER
LOWER NO. 3 STEERING
WHEEL COVER
8.8 (90, 78 in.*lbf)
50 (510, 37)
N*m (kgf*cm, ft.*lbf) : Specified torque
<D>
<D>
for TMC Made:
2.0 (20, 18 in.*lbf)
B137279E01
IP–6
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP

N*m (kgf*cm, ft.*lbf)
: Specified torque
8.8 (90, 78 in.*lbf)
50 (510, 37)
LOWER NO. 2 STEERING
WHEEL COVER
LOWER NO. 3 STEERING
WHEEL COVER
STEERING COLUMN COVER
STEERING PAD
STEERING WHEEL ASSEMBLY
TURN SIGNAL SWITCH ASSEMBLY
WITH SPIRAL CABLE SUB-ASSEMBLY
LOWER NO. 2 STEERING
WHEEL COVER
LOWER NO. 3 STEERING
WHEEL COVER
STEERING PAD
STEERING WHEEL
ASSEMBLY
50 (510, 37)
8.8 (90, 78 in.*lbf)
for 4 Spoke:
for 3 Spoke:
<Q>
<Q>
for TMMK Made:
2.0 (20, 18 in.*lbf)
B137280E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD

IP–7
IP
COMBINATION METER ASSEMBLY
COWL SIDE TRIM SUB-ASSEMBLY LH
FRONT DOOR SCUFF
PLATE LH
INSTRUMENT CLUSTER FINISH PANEL
LOWER INSTRUMENT PANEL
FINISH PANEL
LOWER INSTRUMENT PANEL FINISH PANEL LH
NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
FINISH PANEL
<E>
<E>
<E>
<E>
with Smart Key System:
without Smart Key System:
<A>
<B>
for TMC Made:
COWL SIDE TRIM CLIP
B137281E01
IP–8
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
COMBINATION METER ASSEMBLY
COWL SIDE TRIM SUB-ASSEMBLY LH
FRONT DOOR SCUFF

PLATE LH
INSTRUMENT CLUSTER FINISH PANEL
LOWER INSTRUMENT PANEL
FINISH PANEL
LOWER INSTRUMENT PANEL FINISH PANEL LH
NO. 1 INSTRUMENT PANEL SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
FINISH PANEL
<R>
<R>
<R>
<R>
with Smart Key System:
without Smart Key System:
<N>
<O> or <P>
for TMMK Made:
COWL SIDE TRIM CLIP
B137281E03
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–9
IP
COWL SIDE TRIM SUB-ASSEMBLY RH
FRONT DOOR SCUFF PLATE RH
INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
SUB-ASSEMBLY
<B>
<B>
<B>

<A>
<B> or <C>
for TMC Made:
COWL SIDE TRIM CLIP
B137282E01
IP–10
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
COWL SIDE TRIM SUB-ASSEMBLY RH
FRONT DOOR SCUFF PLATE RH
INSTRUMENT PANEL NO. 2 UNDER COVER SUB-ASSEMBLY
LOWER INSTRUMENT PANEL
SUB-ASSEMBLY
<O>
<O>
<O>
<N>
<O> or <P>
for TMMK Made:
COWL SIDE TRIM CLIP
B137282E03
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–11
IP
FLOOR SHIFT POSITION INDICATOR
HOUSING SUB-ASSEMBLY
NO. 1 INSTRUMENT CLUSTER FINISH PANEL GARNISH
NO. 2 INSTRUMENT CLUSTER
FINISH PANEL GARNISH
SHIFT LEVER KNOB SUB-ASSEMBLY

UPPER CONSOLE PANEL
UPPER CONSOLE REAR PANEL
SUB-ASSEMBLY
UPPER CONSOLE REAR PANEL
SUB-ASSEMBLY
for Automatic Transaxle:
for Manual Transaxle:
SHIFT LEVER KNOB SUB-ASSEMBLY
B137283E01
IP–12
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
INSTRUMENT PANEL NO. 2
REGISTER ASSEMBLY
UPPER CONSOLE PANEL SUB-ASSEMBLY
<F>
<F>
NAVIGATION RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
RADIO RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
with Navigation System:
without Navigation System:
for TMC Made:
B137284E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–13
IP
INSTRUMENT PANEL NO. 2
REGISTER ASSEMBLY

UPPER CONSOLE PANEL SUB-ASSEMBLY
<O>
<O>
for TMMK Made:
with Navigation System:
without Navigation System:
NAVIGATION RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
RADIO RECEIVER WITH HEATER
CONTROL PANEL ASSEMBLY
B137284E03
IP–14
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
CONSOLE BOX ASSEMBLY
CONSOLE BOX CARPET
CONSOLE BOX POCKET
FRONT PILLAR GARNISH LH
FRONT PILLAR GARNISH RH
INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY
NO. 1 CONSOLE BOX INSERT FRONT
NO. 2 CONSOLE BOX INSERT FRONT
for TMC Made:
<F>
<F>
<F>
<F>
<F>
<F>

<F>
<F>
<G>
<G>
FRONT PILLAR GARNISH CLIP
FRONT PILLAR GARNISH CLIP
Non-reusable part
B137285E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–15
IP
CONSOLE BOX ASSEMBLY
CONSOLE BOX CARPET
CONSOLE BOX POCKET
FRONT PILLAR GARNISH LH
FRONT PILLAR GARNISH RH
INSTRUMENT PANEL NO. 1 REGISTER ASSEMBLY
INSTRUMENT PANEL NO. 3 REGISTER ASSEMBLY
NO. 1 CONSOLE BOX INSERT FRONT
NO. 2 CONSOLE BOX INSERT FRONT
for TMMK Made:
<O>
<O>
<O>
<O>
<O>
<O>
<O>
<O>
<S> or <T>

FRONT PILLAR GARNISH CLIP
FRONT PILLAR GARNISH CLIP
<S> or <T>
Non-reusable part
B137285E03
IP–16
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
INSTRUMENT PANEL NO. 1
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL NO. 2
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL SAFETY PAD ASSEMBLY
NO. 1 DEFROSTER NOZZLE GARNISH
<K>
<K>
<C> or <H>
<I> or <Z>
for TMC Made:
20 (204, 15)
N*m (kgf*cm, ft.*lbf) : Specified torque
for LH Side:
for RH Side:
FRONT NO. 2 SPEAKER ASSEMBLY
FRONT NO. 2 SPEAKER ASSEMBLY
<C> or <H>
<I> or <Z>
B137286E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–17

IP
INSTRUMENT PANEL NO. 1
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL NO. 2
SPEAKER PANEL SUB-ASSEMBLY
INSTRUMENT PANEL SAFETY PAD ASSEMBLY
NO. 1 DEFROSTER NOZZLE GARNISH
<V>
<V>
<N>, <a> or <b>
<U>
<U>
for TMMK Made:
N*m (kgf*cm, ft.*lbf) : Specified torque
20 (204, 15)
for LH Side:
for RH Side:
FRONT NO. 2 SPEAKER ASSEMBLY
FRONT NO. 2 SPEAKER ASSEMBLY
<N>, <a> or <b>
B137286E03
IP–18
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
DEFROSTER NOZZLE
ASSEMBLY
FRONT PASSENGER AIRBAG ASSEMBLY
GLOVE BOX LIGHT ASSEMBLY
NO. 1 HEATER TO REGISTER DUCT
NO. 2 HEATER TO REGISTER DUCT

NO. 3 HEATER TO
REGISTER DUCT
NO. 3 INSTRUMENT PANEL STAY
SIDE NO. 1 DEFROSTER
NOZZLE DUCT
SIDE NO. 2 DEFROSTER
NOZZLE DUCT
PLASMACLUSTER
with Plasmacluster:
for TMC Made:
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<F>
<M>
<M>
<L>
<L>
<J>
with Navigation System:
NAVIGATION ANTENNA ASSEMBLY

NO. 2 ANTENNA CORD
SUB-ASSEMBLY
N*m (kgf*cm, ft.*lbf)
: Specified torque
7.0 (71, 62 in.*lbf)
B137288E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–19
IP
DEFROSTER NOZZLE ASSEMBLY
GLOVE BOX LIGHT ASSEMBLY
NO. 1 HEATER TO REGISTER DUCT
NO. 1 INSTRUMENT PANEL PIN
NO. 2 HEATER TO REGISTER DUCT
NO. 3 HEATER TO REGISTER DUCT
NO. 3 INSTRUMENT PANEL STAY
PLASMACLUSTER
SIDE NO. 1 DEFROSTER NOZZLE DUCT
SIDE NO. 2 DEFROSTER
NOZZLE DUCT
NO. 3 INSTRUMENT PANEL STAY
with Plasmacluster:
for TMMK Made:
<W>
<O>
<O>
<O>
<O>
<O>
<O>

<O>
<O>
<O>
<O>
<O>
<O>
<O>
<X>
<X>
<X>
<X>
<W>
<Y>
NAVIGATION ANTENNA ASSEMBLY
NO. 2 ANTENNA CORD
SUB-ASSEMBLY
with Navigation system:
FRONT PASSENGER AIRBAG ASSEMBLY
N*m (kgf*cm, ft.*lbf)
: Specified torque
7.0 (71, 62 in.*lbf)
B137287E01
IP–20
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
REMOVAL
1. PRECAUTION
(See page IP-1)
2. ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
3. DISCONNECT CABLE FROM NEGATIVE BATTERY

TERMINAL
CAUTION:
Wait for 90 seconds after disconnecting the cable to
prevent airbag deployment (See page RS-1).
4. REMOVE LOWER NO. 3 STEERING WHEEL COVER
(See page RS-349)
5. REMOVE LOWER NO. 2 STEERING WHEEL COVER
(See page RS-349)
6. REMOVE STEERING PAD (See page RS-350)
7. REMOVE STEERING WHEEL ASSEMBLY (See page
SR-38)
8. REMOVE FRONT DOOR SCUFF PLATE LH (See page
IR-24)
9. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH (See
page IR-25)
10. REMOVE LOWER INSTRUMENT PANEL FINISH
PANEL LH (for TMC Made)
(a) Remove the bolt <A> and the screw <B>.
(b) Disconnect the hood lock control cable assembly.
(c) Disengage the claw and the 9 clips.
(d) Remove the air hose, disconnect the connector, and
then remove the lower instrument panel finish panel
LH.
<A>
<B>
B133980E05
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–21
IP
11. REMOVE LOWER INSTRUMENT PANEL FINISH

PANEL LH (for TMMK Made)
(a) Remove the bolt <N> and the screw <O> or <P>.
(b) Disconnect the hood lock control cable assembly.
(c) Disengage the claw and the 9 clips.
(d) Remove the air hose, disconnect the connector, and
then remove the lower instrument panel finish panel
LH.
12. REMOVE STEERING COLUMN COVER (for TMC
Made)
(a) Remove the 2 screws <D>.
(b) Disengage the 2 claws and remove the lower
steering column cover.
(c) Disengage the claw and remove the upper steering
column cover.
13. REMOVE STEERING COLUMN COVER (for TMMK
Made)
(a) Remove the 2 screws <Q>.
(b) Disengage the 2 claws and remove the lower
steering column cover.
(c) Disengage the claw and remove the upper steering
column cover.
14. REMOVE TURN SIGNAL SWITCH ASSEMBLY WITH
SPIRAL CABLE SUB-ASSEMBLY (See page SR-39)
<N>
or
<O> <P>
B133980E02
<D>
<D>
B137294E01

<Q>
<Q>
B137294E02
IP–22
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
15. REMOVE NO. 1 INSTRUMENT PANEL SUB-
ASSEMBLY
(a) Disengage the 3 claws and the 2 clips.
(b) Disconnect the connector and remove the
instrument panel sub-assembly.
16. REMOVE LOWER INSTRUMENT PANEL FINISH
PANEL (w/o Smart Key System)
(a) Disengage the 2 claws and 2 clips, and then remove
the lower instrument panel finish panel.
17. REMOVE LOWER INSTRUMENT PANEL FINISH
PANEL (w/ Smart Key System)
(a) Disengage the 2 claws and 2 clips.
(b) Disconnect the connector and remove the lower
instrument panel finish panel.
18. REMOVE INSTRUMENT CLUSTER FINISH PANEL
(a) Remove the 2 clips.
(b) Disengage the guide and 4 claws, and then remove
the instrument cluster finish panel.
B133982
B133983
B133984
Guide
B133985E01
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD

IP–23
IP
19. REMOVE COMBINATION METER ASSEMBLY (for
TMC Made)
(a) Remove the 4 screws <E>.
(b) Disconnect each connector and remove the
combination meter assembly.
20. REMOVE COMBINATION METER ASSEMBLY (for
TMMK Made)
(a) Remove the 4 screws <R>.
(b) Disconnect each connector and remove the
combination meter assembly.
21. REMOVE FRONT DOOR SCUFF PLATE RH (See page
IR-26)
22. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
(See page IR-26)
23. REMOVE INSTRUMENT PANEL NO. 2 UNDER
COVER SUB-ASSEMBLY
(a) Disengage the 4 claws.
(b) Disengage the 2 guides and remove the No. 2
under cover sub-assembly.
24. REMOVE LOWER INSTRUMENT PANEL SUB-
ASSEMBLY (for TMC Made)
(a) Remove the bolt <A>.
(b) Remove the 4 screws <B>.
(c) Disengage the 3 claws and the 3 clips.
(d) Disconnect the connector and remove the lower
instrument panel sub-assembly.
<E>
<E>

<E>
<E>
B133987E01
<R>
<R>
<R>
<R>
B133987E02
Guide
B133988E01
<A>
<B>
<B>
<B>
<B>
B133992E01
IP–24
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP
25. REMOVE LOWER INSTRUMENT PANEL SUB-
ASSEMBLY (for TMMK Made)
(a) Remove the bolt <N>.
(b) Remove the screw <O> or <P> and the 3 screws
<O>.
(c) Disengage the 3 claws and the 3 clips.
(d) Disconnect the connector and remove the lower
instrument panel sub-assembly.
26. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for
Automatic Transaxle)
(a) Turn the shift lever knob counterclockwise and

remove the shift lever knob sub-assembly.
27. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for
Manual Transaxle)
(a) Turn the shift lever knob counterclockwise and
remove the shift lever knob sub-assembly.
28. REMOVE NO. 1 INSTRUMENT CLUSTER FINISH
PANEL GARNISH
(a) Disengage the 2 clips and remove the No. 1
instrument cluster finish panel garnish.
<O>
<O>
<O>
<O>
<P>
or
<N>
B133992E02
B133990
B137272
B133993
INSTRUMENT PANEL – INSTRUMENT PANEL SAFETY PAD
IP–25
IP
29. REMOVE NO. 2 INSTRUMENT CLUSTER FINISH
PANEL GARNISH
(a) Disengage the 2 clips and remove the No. 2
instrument cluster finish panel garnish.
30. REMOVE FLOOR SHIFT POSITION INDICATOR
HOUSING SUB-ASSEMBLY (for Automatic
Transaxle)

(a) Disengage the 6 claws and the 3 clips, and then
remove the floor shift position indicator housing sub-
assembly.
(b) with Seat Heater System:
(1) Disconnect each connector.
31. REMOVE UPPER CONSOLE PANEL (for Manual
Transaxle)
(a) Open the lid of the upper console panel.
(b) Apply protective tape to the area shown in the
illustration.
B133994
B133995
Protective tape
B137274E01