XDocument Note part 1 doc

Nó dễ sử dụng,Nó có sẵn trình tìm kiếm máy chủ Proxy
Rất buồn là nó không miễn phí
Đây là link:

_____________________________________________________________

Anh nên thêm NetworkActiv vào danh sách Server
www.NetworkActiv.com


pretty dated linkfarm at this time but what the hell



(c) www.ocforums.com
Tôi không biết phải gửi bài này vào đâu nhưng có vẻ như rất nhiều người ở đây hỏi
về những liên kết(link) đến những thứ xác định. Vì thế tôi sẽ gửi những link ở đây
cho những ai cần chúng. Nếu ai đó có ý kiến rằng tôi không được gửi bài ở đây, thì
hãy up lời chào mừng của bạn ở đây cho tất cả cùng thấy .

Chúng đây;

Motherboard Monitor v5.3
fid,7309,00.asp

CPU Stability Test
fid,7146,00.asp

BIOS Wizard
id,21480,00.asp

SiSoft Sandra Standard
fid,4005,00.asp

Prime95


WCPUID
c/download.html

CPUID/CPU-Z


NEW
Central Brain Identifier


3DMark and PCMark


CPU Monitor


BenchMarks Downloads
n=category&id=6

Tweaking Downloads
n=category&id=5

Generic Utilities Downloads

=category&id=10

Ok guys i just thought i should add the links to the pin mod guide and unlocking
guide for those not sure on which pins to connect for what


Pin Mod guide
amd_pinmod.html

Unlocking by painting guide
d_painting.html

And if i am posting these unlocking links i might as well explain it before somone
burns out their cpu and says I am responsible so here goes.

In reality a chip can be overclocked on itself without the BIOS and for all of you
out there with 2 chips lieing around out opf ur pc i advise you to take a look at the
bridges on the chip and note differences. All athlon xp chips had the bridges in the
same position but different ones were connected to make the chip stock at different
multis and voltages. Now for example all thouroughbreds have 5 L3 bridges and
these control the cpu's multiplier. A 1600xp will have its multi locked at 10.5 by
having the L3 in the order "open, open, open, open, closed." This locks the chip at
10.5. A 1700xp will have its L3 bridges set up as "open, open, open, open, open."
and that locks it at a 11 multi. The multis on these chips are only locked for the
lower multis meaning that it will be at 11 but u can normally access higher multis
and not the lower ones which are what most people want so they can set their FSB
higher. Now it has been figured out somehow that no matter what the L3 bridges
are set at, if you connect the number 5 L3 bridge it allows u access to the lower
multis and this seems the way most people unlock the thoroughbreds. The
polomino cores were unlocked by connecting all the L1 bridges. Before any of this

unlocking took place amd's athlon thunderbird chips were out and people figured
out by using a graphite pencil it was easy enough to connect the L1 bridges to
unlock the multi for higher overclocks. But amd naturally caught on and started
cutting laser holes between the bridges that werent factory connected to stop
overclocking from taking place. These bridges are cut deep into the copper layer so
if you were to connect the bridges using conductive paint it would kill the chip so
overclockers started to fill these with non conductive substances. I heard crazy glue
is a favourite and also crayola crayons are used. Now for connecting the bridges
you need to buy some sort of conductive paint or a trace pen. Conductive paint is
easily available from auto shops as window defogger repair kits which have silver
in the paint. A common mistake is trying to use thermal compound grease such as
artic silver but these are nonconductive so incase some gets spread over bridges
while applying heat sinks. So not you know how things work you want to get to
unlocking these chips. Well the link is posted for the guide and you know which
bridges are to be connected. So first off if using crazy glue or super glue to fill in
the laser holes you need to tape off the bridges so that crazy glue only gets in the
laser pits then you need to use a rasor to trim it down flush. MAKE SURE NONE
GETS ON THE BRIDGE CONTACTS!! Using the crayon is easier as you just
colour over the bridges and use a pencil eraser to remove excess from around the
bridges. So you got your pits filled and now you need to proceed to tape off only
the bridge you want to connect using tape. After doing this you can put a drop of
paint of use ur conductive pen to connect the 2 bridges. I read that if ur brave
enough and have steady hands you can use a conductive pen to draw around the
number L3 bridge pit to connect that bridge. Sort of using a C shape connection.
The bridges connect pins at the base of your cpu so if ur not up to the whole
painting the top then you can always try you luck at getting a thin piece of wire
maybe from a telephone line and tieing a knot around the pins that need to be
connected. Once again the guide shows which pins you would need to set certain
voltages and multis. Lots of info is available with better pics and i will post some
links of sites for yall but goodluck to all trying this.

here is a link for unlocking the polominos
nlock/index.htm

another polomino unlcking guide but with a video


Here is one on unlcoking thoroughbreds


And now just a usefull page on overclocking and unlocking athlons that some
might enjoy looking at


hey forgot to post the link for CPUFSB which allows you to change FSB in
windows for those whose boards dont support much in the bios



This is Soft FSB for those looking for it. It works the same as CPUFSB and allows
you to change ur FSB in windows


Now for some videocard overclocking program links

ok this is powerstrip for general overclocking
http://66.227.107.157/ps.htm

radeon tweaker called rage 3d. Very opular for overclocking
ion=file&id=440

patch for 9500-9500 pro or 9700. This is the softmod patch
ion=file&id=563

to execute the above script you will need this which is another tweaker
ion=file&id=163

nvidia videocard tweaker claled nvhardpage
ion=file&id=163

this file is for emulating the quadro family of nvidia using a geforce 4
ion=file&id=517

this is just a geforce tweak utility with no help files
ion=file&id=386