HAT_12144031_4_EN

REPORT
DESIGN AND MANUFACTURING
PLASTIC INJECTION MOLD

2 plate injection mold


2 plate injection mold


CONSTITUTE

A cavity

Many cavity


Having core inside the core graft transplantation
Having grafted core
Consists of 2 parts: mold prior (negative mold) and patterned (positive
mold)


Cấu tạo




II. PRINCIPLE OF OPERATION

Tables machine motion from left to right to bring action part mold

Shaft guidance and navigation for
the second silver mold half and
static mold


II. PRINCIPLE OF OPERATION
When the second half against the same mold, the plastic molding
machine will pump into the cavity, depending on the magnitude of
the plastic products will be filled within 18 to 60 seconds

The cooling system will operate


II. PRINCIPLE OF OPERATION

The process of pushing the plate compression springs push the mold,
pushing shaft of the machine will push two plates push, pulls in the


II. PRINCIPLE OF OPERATION

This process is performed on an ongoing basis


III. APPLICATION
•These

products have fewer vents.

Is the civil, personal
items, household utensils.


Products with high accurately and high
technical requirements.


Based on the public to identify the mold 2
sheets?


Mold Based on only 2 plates, 1 move 1 stand still, just
open one time was able to get products and plastic
channels (Roll longer sticky resin on the product).



The layout channel (channel 1 on the same plane)



• The structure of the mold



• Products after withdrawing mold



characteristics to identify a second mold plate?