JRC installing IHO

Migrating to IHO Certificate for S-63 1.1 in
JRC ECDIS
This guide is based on the JAN 701B/901B ECDIS Version 56


Migrating to IHO certificate for S-63 1.1

2

1 Migrating from P R IMAR .C R T to IHO.C R T
To install S-63 1.1 Data the latest IHO certificate will need to be installed in your ECDIS. The
IHO.CRT is located on any AVCS S-63 1.1 Media. To install it please insert the S-63 1.1
Media into your ECDIS and follow the steps below:

1. Exit Navigation & Planning mode and select “ChartPortfolio”
JAN-901-B

NDC-2000

1.

2. Select “OK”

2.


Migrating to IHO certificate for S-63 1.1

3

3. Select “Tool” then “Option”

3.

4. Select the “S-63” Tab
5. Select “Import of Certificate”

4.
5.


Migrating to IHO certificate for S-63 1.1

4

6. Select appropriate Drive location from the dropdown.
7. Select appropriate folder
8. Select “IHO.CRT” and double click on it to populate the File Name box
9. Select “OK”

8.

7.

9.

6.

10. Select “OK”

10.

11. Select ”OK” (noting the number assigned)

11.

The IHO.CRT has now been saved in the
system. However, before S-63 1.1 data can
be loaded it must be selected in the system.


Migrating to IHO certificate for S-63 1.1

5

12. Click “Select of Certificate”

12.

13. Select “2:IHO.CRT” from the dropdown (as noted earlier).
14. Select “OK” (N.B. It is NOT possible to delete the 0:IHO.CRT from this system).

13.

14.

15. Select “OK”

15.

The IHO.CRT has now been installed and
selected within the system. S-63 1.1 data can

be now be loaded into the ECDIS.


Migrating to IHO certificate for S-63 1.1

2 R everting to P R IMAR .C R T
If for any reason the migration to S-63 1.1 fails then the PRIMAR.CRT file will need to be reinstalled. The JRC remembers previously installed certificates and therefore you should be
able to simply select the PRIMAR.CRT.
1. To do this select “Tool” from the Chart Portfolio screen.
2. Select “Option”.
3. Click “Select of Certificate”
4. Select the PRIMAR.CRT from the dropdown and select “OK”

Your system will now be in the same state as before attempting the upgrade and you can
continue to use AVCS S-63 1.0 data. However, you should inform your Admiralty Chart
Agent of the problems that you have encountered.

UKHO 2013 All Rights Reserved
The copyright in this document, which contains information of a proprietary nature, is vested in UKHO.
The content of this document may not be used for purposes other than that for which it has been supplied
and may not be reproduced, either wholly or in part, in any way whatsoever.

6