Giáo trình công nghệ chi tiết sử dụng ắc QUY viễn thông dạng gel CG2 300PEV (3)(1)

CG2-300PEV
Gel battery shows some distinctive advantages over flooded battery or AGM battery,
such as super thermal stability, high deep discharge capability, good recovery from
deep discharge , even if the battery is left discharged for three days, it will recover
to 100% of capacity. With the above-mentioned advantages, the gel battery has
long service life, specially suitable for motive power applications, such as golf trailer,
sruubber, folklift,etc.The deep discharge cycles increased 50% as compared with
the AGM battery.
Battery Construction
Component

Positive plate

Negative plate

Container

Cover

Safety valve

Terminal

Raw material

Lead dioxide

Lead

ABS

ABS

Rubber

Copper

General Features
● Nanometer SiO 2 and H 2 SO 4 gelled
electrolyte technology for efficiency
gas recombination of up to 99% and
freedom from electrolyte maintenance
or water adding.
● Not restricted for air transport-complies
with IATA/ICAO Special Provision A67.
● UL-recognized component.
● Can be mounted in any orientation.
● Computer designed lead, calcium tin alloy
grid for high power density.
● Long service life, float or cyclic
applications.
● Maintenance-free operation.
● Low self discharge.
● Case and cover avaiable in both standard
and flame restardant ABS.
Dimensions and Weight
Length(mm / inch)
Width(mm / inch)
Height(mm / inch)
Total Height(mm / inch)
Approx. Weight(Kg / lbs)

171
151
330
364
20 /

/ 6.73
/ 5.94
/ 13.0
/ 14.3
44.1

Separator
PE

Electrolyte
Gelled acid

Performance Characteristics
Nominal Voltage
2V
Number of cell
1
Design Life
20 years
o
o
Nominal Capacity 77 F(25 C)
10 hour rate (30.0A, 1.80V)

300Ah
5 hour rate (52.8A, 1.75V)
264Ah
1 hour rate (186A, 1.6V)
186Ah
Internal Resistance
0.75mOhms
Fully Charged battery 77oF(25oC)
Self-Discharge
2% of capacity declined per month at 20oC(average)
Operating Temperature Range
Discharge
-20~60oC
Charge
-10~60oC
Storage
-20~60oC
1200A(5s)
Max. Discharge Current 77oF(25oC)
Charge Methods: Constant Voltage Charge 77oF(25oC)
Cycle use Charge Voltage:
2.30-2.35VPC
Maximum charging current
60A
-5mV/ oC
Temperature compensation
Standby use
2.23-2.27VPC
No charge current limit is required
-3.3mV/ oC

Temperature compensation

342

Discharge Constant Current (Amperes at 77oF25oC)
End point
10min 15min 30min
volts/cell
1.60V
630
516
300
1.65V
594
480
294
1.70V
558
456
288
1.75V
522
420
282
1.80V
486
384
270

1h

3h

5h

10h

20h

186
180
174
168
159

78.0
76.0
74.0
73.0
70.0

57.0
55.2
54.0
52.8
51.0

31.5
31.2
30.6

30.3
30.0

16.8
16.5
16.2
16.1
15.8

Discharge Constant Power (Watts at 77oF25oC)
End point
volts/cell
1.60V
1.65V
1.70V
1.75V
1.80V

10min 15min 30min
1079
1026
1000
952
902

875
868
832
780
737

562
536
511
496
475

1h

3h

5h

10h

20h

348
331
317
306
293

146
139
131
125
118

109

103
98.5
96.3
89.8

61.0
55.4
54.3
52.4
49.0

33.1
31.2
29.8
28.8
27.7

(Note)The above characteristics data are average values obtained within
three charge/discharge cycles not the mimimum values.
Total height with removeable cover: 364

page1 of 2

www.vision-batt.com


CG2-300PEV
O

Constant voltage charging

o
characteristic (0.20CA,25 C)

Discharge characteristic (25 C)

Battery voltage(V)

CHARGED VOLUME
CHARGE VOLTAGE

73A 52.8A 30A
630A

300A 186A

CHARGING CURRENT

Discharge time

Self-discharge characteristic
110

(V/CELL)

100
Capacity(%)

(V/6V)

(V/4V)

(V/8V)

(V/12V)

Relationship between
charging voltage and temperature

90

15.6

10.4

7.8

5.2

2.6

15.0

10.0

7.5

5.0

2.5

14.4

9.6

7.2

4.8

2.4

13.8

9.2

6.9

4.6

2.3

60

13.2

8.8

6.6

4.4

2.2

50

-10

0

10

20

30

40

50

80
70

40

60

Ambient temperature(o C)

0

3

6

9

12
15
18
21
Storage time: months

24

27

Cycle service life in relation to
depth of discharge

Capacity(%)

Life characteristics of Standby use

50% Depth of discharge

Number of cycles(cycles)

Life(year)

Temperature effects on capacity

Capacity (%)

Life(years)

Temperature effects on float life

Temperature( oC)

THE INTERNATIONAL CE RTIFICATION NETWORK

ISO9001:2000

MH25860

G4M19906-9202-E-16

www.vision-batt.com

Shenzhen Center Power Tech. Co., Ltd.
Center Power Industrial Park, Tongfu Industrial District Dapeng Town, 518120 Shenzhen, China
Tel: (+86-755) 8431 8088 Fax: (+86-755) 8431 8038 E-mail:
Copy Right Shenzhen Center Power Technology Co., Ltd

(Edition 2011-8)

Page 2 of 2

30