nDimensions
Unit: mm
Unit: mm
With cab
2 780
3 090
2 780 (canopy folded)
2 275
2 275
With canopy
290
635 635
675
290
585
3 850
1 640
635 635
5 110
With cab
5 110
With cab
With canopy
With canopy
Tires
Weights
Operating weight
kg
13 120
12 990
No. of tires
Front axle
kg
5 565
5 515
Size
Rear axle
kg
7 555
7 475
Supporting system
Machine weight
585
3 850
nSpecifications
Water ballast weight
675
1 640
kg
kg
3 700
9 350
9 220
3 tires/front, 4 tires/rear
14/70-20-12PR (OR)
Front axle
Oscillation type
Rear axle
Rigid type
Braking system
Performance
Main brake
Travel speeds (forward/reverse)
Full-hydraulic, wet-type sealed disc brake
Low
km/h
10
Auxiliary brake
HST brake
High
km/h
25
Parking brake
Spring-set/hydraulic-released wet-type disc brake
m
6.3
Min. turning radius
Gradeability (operating weight) degree (%)
47 (25)
Compaction width
mm
2 275
Overlap
mm
55
Model
Isuzu BB-4BG1T
Type
Water-cooled, 4-cylinder direct injection
L (cc)
Rated output kW/min-1 (HP/rpm)
4.329 (4 329)
80.2 / 2 200 (108 / 2 200)
Transmission
Transmission/differential
Drive system
Reduction gear
Type
Fully hydraulic (orbitroll)
Water suction/sprinkling system
Water suction/road sprinkling/feeding to others
Tire sprinkling
Engine
Displacement
Steering system
Hydrostatic/2-stage
Propeller shaft
Bevel gear, planetary gear
Hydraulic pump
Electric pump
Tank capacities
Fuel tank
L
115
Water sprinkler tank
L
3 700
Note: Data is expressed in SI units, followed by conventional units in ( ) for reference.
nOptions
• Separate tank for liquid sprinkling • Anti-freezing device
• Hydraulic differential lock • Guard sensor (obstacle sensor)
• Rotary beacon
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional
equipment, accessories, and all standard equipment with some differences in color and features.
Before use, read and understand Operator's Manual for proper operation.
Hitachi Construction Machinery
www.hitachi-c-m.com
KR-EN005
06. 11 (SZ/SZ, MT3)
Printed in Japan
Specifications
External View
Standard
14 t with ballast
Weights
H
Operating Weight
kg
10 040
14 090
Front drum
kg
5 030
7 055
Rear drum
kg
5 010
7 035
Machine weight
kg
9 300
13 350
Front drum
kg
4 770
6 800
Rear drum
kg
4 530
6 550
Performance
C
Travel speeds Low
km/h
0 – 8.0
High
km/h
0 – 16.5
Operating weight Front drum N/cm (kgf/cm)
449 (45.7)
Rear drum N/cm (kgf/cm)
447 (45.5)
627 (64.0)
Front drum N/cm (kgf/cm)
425 (43.4)
606 (61.8)
Rear drum N/cm (kgf/cm)
404 (41.2)
Machine weight
Min. turning radius
E
820 mm
F
B
I
Gradeability (operating weight)
G
D
820 mm
A
m
degree (%)
629 (64.1)
584 (59.5)
6.2
25 (47)
17 (41)
Compaction width
mm
2 100
Overlap
mm
50
Engine
Model
Dimensions
Unit: mm
14 t with ballast
Standard
A Overall length
5 040
B Overall width
2 100
C Overall height (transport)
Isuzu AA-4JG1T
Type
Displacement
Water-cooled, 4-cylinder direct injection
L (cc)
Rated output kW/min-1 (HP/rpm)
3.059 (3 059)
55.9/2 150 (75/2 150)
Steering System
Type
3 150 (2 610)
Articulated
System
Full-hydraulic (orbitroll)
D Wheel base
3 400
E Front drum diameter
1 640
Service brake
Hydrostatic
550
Parking brake
Wet-type multiplate-disc (spring-set/hydraulic-released)
F Front drum width
Brakes
G Rear drum diameter
1 640
Water sprinkler
H Rear drum width
1 100
Tank capacities
I
Min. ground clearance
340
Options
245
Pressurized water by electric motor
Fuel Tank
L
120
Sprinkler tank
L
670
Note: Data is expressed in SI units, followed by reference data in ( ) in conventional units.
• Anti-freezing device
• Rear under-mirror
• Rotary beacon • Guard sensor (obstacle sensor)
These specifications are subject to change without notice.
Illustrations and photos show the standard models, and may or may not include optional
equipment, accessories, and all standard equipment with some differences in color and features.
Before use, read and understand Operator's Manual for proper operation.
Hitachi Construction Machinery
www.hitachi-c-m.com
KR-EN006
06. 09 (CD/SZ, MT3)
Printed in Japan
Technical Specifications
B W9ASW
H2
H
✓ Cummins 4B3.3T Diesel Engine
✓ Pressurized Water Spray System
✓ Horn
✓ Front and Rear Drum Scrapers
✓ Cocoa mats
✓ Vandal Guards
✓ Falling-Object/Roll Over
Protective Structure
(FOPS/ROPS) and Seat belts
Optional equipment
Headlights (Front and Rear)
Turn Signals and 4-way Flashers
Special Paint, 1 Color
(Enamel Only)
A
D
W
B
D2
L
Dimensions
in inches (mm)
BW 9 ASW
A
132
(3353)
B
D
D2
62.5
40
53
(1590) (1016) (1346)
Technical data
H
H2
74
108
(1880) (2743)
K
16.5
(419)
L
W
183
56
(4648) (1422)
BOMAG
BW 9 ASW
Weights
Metal weight......................................... lbs
Guide roll/Drive roll........................... lbs
Weight with ballast ............................... lbs
Guide roll/Drive roll........................... lbs
Max. static linear load (ave) .................. lbs/in
Guide roll/Drive roll........................... lbs/in
(kg)
(kg)
(kg)
(kg)
(kg/cm)
(kg/cm)
14080
5970/8110
19320
8540/10780
173
153/193
(6387)
(2708/3679)
(8763)
(3874/4890)
(30.8)
(27.2/34.3)
Dimensions
Track radius, inner................................ in
Height with FOPS/ROPS..................... in
(mm)
(mm)
142
108
(3607)
(2743)
Driving Characteristics
Speed (1) .............................................. mph
Speed (2) .............................................. mph
(km/h)
(km/h)
0-5.1
0-10.2
(0-8.2)
(0-16.4)
(kW)
(min-1)
Cummins
4B3.3T
water
4
83
2400
diesel
12
hydrostatic
R
(62)
(2400)
Drive
Engine manufacturer ............................
Type......................................................
Cooling.................................................
Number of cylinders .............................
Performance SAE, brake ....................... hp
Speed .................................................... rpm
Fuel ......................................................
Electric equipment................................ V
Drive system .........................................
Driven drum.........................................
Brakes
Service brake.........................................
Secondary/Parking brake.......................
hydrostatic
SAHR
Steering
Steering system .....................................
Steering method....................................
Steering angle +/-.................................. degrees
Oscillating angle straight +/-................. degrees
Oscillating angle full turn +/- ............... degrees
automotive-type
hydraulic
45
25
10
(grad)
(grad)
(grad)
Water Spray System
Type of spray system.............................
Capacities
Fuel ...................................................... gal
Water.................................................... gal
Hydraulic oil reservoir .......................... gal
Coolant system ..................................... gal
(45)
(25)
(10)
pressurized
(l)
(l)
(l)
(l)
34
170
15
4
(128)
(645)
(57)
(15)
Technical modifications reserved. Machines may be shown with options.
www.bomag-americas.com
2000 Kentville Road • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
0M804TT
Standard equipment
K
B134H-943
Service
Service is an important element with
all BOMAG compaction equipment.
That’s why there are BOMAG factory
trained technicians everywhere–not
far from your job. So when a wear
part needs to be replaced on site, or
when a service interval is due,
BOMAG authorized service engineers
and technicians are available no matter where the machine happens to be.
Tandem Vibratory Rollers
B W141AD-2, B W151AD-2
BW 141 AD-2 - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
area coverage
sq yd/hr
2
rolling speed
(mph)
3.41
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
4921
391
521
642
772
3
4
5
6
3.41
3.41
3.41
3.41
3281
260
347
428
515
2461
195
260
321
386
1969
156
208
257
309
1640
130
174
214
257
BW 151 AD-2 - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
3.41
3.41
3.41
3.41
3.41
area coverage
sq yd/hr
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
5510
435
579
724
869
3673
290
386
483
579
2755
217
290
362
435
2204
174
232
290
348
1837
145
193
241
290
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of more than 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
Technical Specifications
B W141AD-2, B W151AD-2
✓ Hydrostatic travel and vibration
drives
C
D
W
B
L
Dimensions in inches (mm)
A
B
BW 141 AD-2 114.2 66.1
(2900) (1679)
BW 151 AD-2 114.2 73.2
(2900) (1860)
C
36.4
(925)
36.4
(925)
D
47.2
(1199)
47.2
(1199)
H
82.7
(2100)
82.7
(2100)
Technical data
joint
✓ Hydrostatic articulated steering
✓ Spring-Applied, HydraulicallyReleased (SAHR) parking brakes
on each drum
✓ Crab-steering to both sides
(6.7 inches)
✓ Hydraulically driven water pump
✓ Pressurized water spray system
✓ High capacity plastic water tanks
✓ Automatic vibration operation
✓ Vibration control in travel lever
✓ Independent vibration control of
either drum
✓ Dual vibrating frequencies and
amplitudes
✓ Laterally sliding/pivoting seat and
controls assembly
✓ Pivoting steering wheel column
✓ Emergency STOP
✓ Spring-loaded, hinged scrapers
(2 per drum)
✓ Speedometer
✓ ROPS / FOPS with seat belt
✓ Lights & turn signals
(front & rear)
✓ Back up alarm
Weights
Basic weight with ROPS/FOPS....................... lbs (kg)
Operating weight............................................. lbs (kg)
Axle load, drum (front/rear) ............................ lbs (kg)
Static linear load (front/rear) ........................... pli (kg/cm)
Dimensions
Working width ................................................ in (mm)
Side clearance .................................................. in (mm)
Track radius (inner)......................................... in (mm)
Dimensions.....................................................
Driving Characteristics (depending on site conditions)
Speed (with vibration)..................................... mph (kmph)
Speed (transport)............................................. mph (kmph)
Max. gradeability without/with vibration ........ %
Drive
Engine manufacturer .......................................
Type ................................................................
Cooling-cylinder heads....................................
Cooling-cylinder liners ....................................
Number of cylinders........................................
Performance ISO 9249.................................... hp (kW)
Speed............................................................... rpm
Performance SAE J1349 .................................. hp (kW)
Speed............................................................... rpm
Electric equipment .......................................... V
Drive system....................................................
Drum driven ...................................................
Brakes
Service brake ...................................................
Parking brake ..................................................
Steering
Steering system................................................
Steering method ..............................................
Steering steering angle ±.................................. degrees
Oscillating angle ±........................................... degrees
Vibratory system
Vibrating drum ...............................................
Drive system....................................................
Frequency........................................................ vpm (Hz)
Amplitude ....................................................... in (mm)
Centrifugal force (per drum) ........................... lbs (kN)
Water spray system
Water spray system type ..................................
Capacities
Fuel ................................................................. gal (l)
Water............................................................... gal (l)
Hydraulic oil ................................................... gal (l)
Engine oil........................................................ gal (l)
Special paint
O
A
✓ Bolt-on oscillating/articulation
Optional Equipment
K
H1
111.2
(2825)
111.2
(2825)
H2
116.5
(2959)
116.5
(2959)
K
15.2
(386)
15.2
(386)
L
172.0
(4369)
172.0
(4369)
O
3.5
(90)
3.5
(90)
W
59.1
(1500)
66.1
(1680)
BOMAG
BW 141 AD-2
BOMAG
BW 151 AD-2
13814
15015
7460/7555
126.2/127.8
(6266)
(6811)
(3383/3427)
(22.6/22.8)
14586
15785
7844/7941
118.7/120.1
(6616)
(7160)
(3558/3602)
(21.2/21.4)
59.1
3.5
150.6
see sketch
(1500)
(90)
(3825)
66.1
3.5
147.0
see sketch
(1680)
(90)
(3735)
0 - 3.4
0 - 7.8
40/35
(0 - 5.4)
(0 - 12.5)
0 - 3.4
0 - 7.8
40/35
(0 - 5.4)
(0 - 12.5)
Deutz
BF4L 1011
Air
Oil
4
69.4
(51)
2500
74
(55.2)
2500
12
hydrostatic
f+r
Deutz
BF4L 1011
Air
Oil
4
69.4
(51)
2500
74
(55.2)
2500
12
hydrostatic
f+r
hydrostatic
SAHR
hydrostatic
SAHR
oscillating, articulating
hydrostatic
35
8
oscillating, articulating
hydrostatic
35
8
f + r, f, r
hydrostatic
2400/3000 (40/50)
0.026/0.013 (0.66/0.33)
12285/9810 (54.6/43.6)
f + r, f, r
hydrostatic
2400/3000 (40/50)
0.024/0.012 (0.60/0.31)
12285/9810 (54.6/43.6)
pressurized
pressurized
34.3
190.2
15.9
2.5
(130)
(720)
(60)
(9.5)
34.3
190.2
15.9
2.5
(130)
(720)
(60)
(9.5)
Technical data subject to change without notice. Illustrations may show optional equipment.
www.bomag-americas.com
2000 Kentville Road • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
3M204TTWW
Standard Equipment
H
B129H-755
Shipping dimensions
in cubic feet (m3) without/with ROPS
BW141AD-2
544.4 (15.4) 767.3 (21.7)
BW151AD-2
602.7 (17.1) 849.5 (24.1)
H2
H1
Tandem Vibratory Roller
B W266 / B W278
BW266 ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.32
4.32
4.32
4.32
4.32
area coverage
sq yd/hr
6970
4646
3485
2788
2323
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
549
732
915
1098
366
488
610
732
274
366
457
549
220
293
366
439
183
244
305
366
BW278 ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.32
4.32
4.32
4.32
4.32
area coverage
sq yd/hr
8237
5491
4118
3295
2746
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
649
865
1081
1297
432
577
721
865
324
432
541
649
259
346
432
519
216
288
360
432
Technical Specifications
B W266 / B W278
S
Shipping dimensions
in cubic feet (m3)
without / with ROPS
BW 266
736.3 (20.7) 984.4 (27.9)
BW 278
835.1 (23.6) 1124.1 (31.8)
H2
W
B
H
BW278
K
L
A
D
Standard Equipment
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Drums (BW278)
Multi-System Performance
Indicator (MSPI)
Vandal Protection
Horn
Dual Amplitude
Water Saver System
Pressurized, Non-corrosive
Water Spray System
Hydrostatic Drive
Electronic Controls
Automatic Vibrator “On/Off ”
Speed Limiter
Secondary/Park Brake Release
FOPS/ROPS with seat belts
Asphalt Mat Temperature Sensing
System
Working lights (front/rear)
Turn Signals and 4 way flashers
Back Up Alarm
Optional Equipment
Night Paving Lights
Special paint
D
48 (1219)
48 (1219)
H
H2
78 (1981) 110 (2667)
78 (1981) 110 (2667)
Technical data
L
S
W
200 (5080) 0.70 (17.78) 66 (1676)
200 (5080) 0.70 (17.78) 78 (1981)
BW266
BW278
Weights
Shipping Weight with ROPS .............................. lbs
Operating Weight with ROPS ............................ lbs
Axle load, (front) ................................................ lbs
Axle load, (rear) .................................................. lbs
Average static linear load .................................... pli
(kg)
(kg)
(kg)
(kg)
(kg/cm)
19150
20600
10757
9843
156
(8694)
(9352)
(4879)
(4465)
71
21750
23500
12154
11345
151
(9875)
(10669)
(5513)
(5146)
68
Dimensions
Working width.................................................... in
Track Radius, inner............................................. in
Dimensions.........................................................
(mm)
(mm)
66
156
see sketch
(1676)
(3962)
78
150
see sketch
(1981)
(3810)
Driving Characteristics (depending on site conditions)
Speed (1)............................................................. mph (kmph)
Speed (2)............................................................. mph (kmph)
Max. gradeability without/with vibration............ %
0-5
0-10
40
(0-8.1)
(0-16.1)
0-5
0-10
40
(0-8.1)
(0-16.1)
Drive
Engine manufacturer...........................................
Type....................................................................
Cooling...............................................................
Number of cylinders ...........................................
Performance SAE J 1349 .................................... hp (kW)
Speed .................................................................. rpm
Fuel.....................................................................
Electric Equipment ............................................. V
Drive System.......................................................
Drum Driven......................................................
Cummins
4B3.9 QSB-C130
Water
4
130
(97)
2500
diesel
12
hydrostatic
f+r
Cummins
4B3.9 QSB-C130
Water
4
130
(97)
2500
diesel
12
hydrostatic
f+r
Brakes
Service brake.......................................................
Parking brake ......................................................
hydrostatic
SAHR
hydrostatic
SAHR
Steering
Steering system ...................................................
Steering method..................................................
Steering angle +/- ................................................ degrees
Oscillating angle +/-............................................ degrees
oscill., artic.
hydraulic
35
12
oscill., artic.
hydraulic
35
12
Vibratory system
Vibrating system .................................................
Drive system .......................................................
Frequency max.(low/high) .................................. vpm (Hz)
Amplitude (low/high) ......................................... in (mm)
Centrifugal force (low/high)................................ lbs (kN)
f, r, f+r
hydrostatic
3400/3800 (57/63)
0.020/0.030 (0.508/0.762)
27580/32950 (122.6/146.4)
f, r, f+r
hydrostatic
3400/3800 (57/63)
0.020/0.030 (0.508/0.762)
30368/37099 (135.0/164.9)
Water Spray System
Type of system ...................................................
Back-up system ...................................................
Pressurized
Pressurized
Pressurized
Pressurized
Capacities
Fuel..................................................................... gal
Cooling system ................................................... qts
Engine ................................................................ gal
Water tank (each)................................................ gal
www.bomag-americas.com
K
15 (381)
15 (381)
(l)
(l)
(l)
(l)
50
19
22
125
(189)
(18)
(83.3)
(473)
60
19
22
150
2M107TTWW
Drums (BW266)
✓ 78” x 48” Diameter Machined
Dimensions in inches (mm)
A
B
BW266 120 (3048) 72 (1829)
BW278 120 (3048) 84 (2134)
(227)
(18)
(83.3)
(568)
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
B162H-1783
✓ Cummins 4B 3.9 Diesel Engine
✓ Front and Rear Drum Scrapers
✓ 66” x 48” Diameter Machined
Tandem Vibratory Roller
B W120AD-4
EARTHWORKS
# passes
2
3
4
5
rolling speed
(mph)
4.77
4.77
4.77
4.77
area coverage
sq yd/hr
5504
3669
2752
2201
“productivity in cu yd/hr by lift thickness, 100% efficiency”
4 inches
6 inches
8 inches
12 inches
612
919
1225
1837
408
612
817
1225
306
459
612
919
245
367
490
735
ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.77
4.77
4.77
4.77
4.77
area coverage
sq yd/hr
5504
3669
2752
2201
1835
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
434
579
723
868
289
386
482
579
217
289
362
434
174
231
289
347
145
193
241
289
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of a minimum 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
Technical Specifications
B W120AD-4
H2
Shipping dimensions
in cubic feet (m3)
without/with ROPS
BW120AD-4
200.3 (5.67)
277.1 (7.85)
H1
S
C
K
A
Standard Equipment
front/rear
✓ Emergency stop button
✓ Vibration cut-off, rear drum
✓ Back-up alarm
✓ Water level indicator
✓ Fuel level indicator
✓ Pressurized water sprinkler system
✓ Laterally sliding seat
✓ FOPS/ROPS with safety belts
Optional Equipment
Working lights front/rear
Seat with contact switch
Edge cutter
Indicator and hazard lights
Rotary beacon
Biodegradable hydraulic oil
Special paint
Tool kit
Double travel lever (Sliding Seat)
Foldable ROPS with seat belts
ROPS with seat belts
Single point lifting device
O
B
Dimensions in inches (mm)
A
B
C
D
H1
H2
K
L
O
S
W
BW120AD-4
68.0
50.23 18.7 27.6 70.9
98.0
9.8
97.2
1.5 0.5 47.2
(1728) (1276) (475) (700) (1800) (2490) (250) (2470) (38) (13) (1200)
Technical data
Weights
Basic Weight with ROPS .................................... lbs (kg)
Operating Weight ............................................... lbs (kg)
Average axle load................................................. lbs (kg)
Average static linear load CECE.......................... pli (kg/cm)
Dimensions
Length with ROPS ............................................. in
(mm)
Track Radius, inner............................................. in
(mm)
Dimensions.........................................................
Driving Characteristics (depending on site conditions)
Speed (with vibration)......................................... mph (kmph)
Speed (for transport)........................................... mph (kmph)
Max. gradeability without/with vibration............ %
Drive
Engine manufacturer...........................................
Type....................................................................
Cooling...............................................................
Number of cylinders ...........................................
Performance ISO 9249 (max) ............................. hp (kW)
Speed (max) ........................................................ rpm
Performance SAE J1349 (max) ........................... hp (kW)
Speed (max) ........................................................ rpm
Throttle position 1.............................................. rpm
Throttle position 2.............................................. rpm
Electric Equipment ............................................. V
Brakes
Service brake.......................................................
Parking brake ......................................................
Steering
Steering system ...................................................
Steering method..................................................
Steering angle +/- ................................................ degrees
Oscillating angle +/-............................................ degrees
Vibratory system
Vibrating drum...................................................
Drive system .......................................................
Frequency ........................................................... vpm (Hz)
Amplitude........................................................... in
(mm)
Centrifugal force (each drum)............................. lbs (kN)
Water Spray System
Type of water spray system..................................
Capacities
Fuel..................................................................... gal (l)
Water .................................................................. gal (l)
BOMAG
BW120AD-4
5236
5732
2866
60.7
(2375)
(2600)
(1300)
(10.8)
97.2
103.1
see sketch
(2470)
(2620)
0-4.0
0-7.5
40/30
(0-6.5)
(0-12)
Kubota
D 1703 MDI
Water
3
34.3
2700
33.8
2700
2200
2600
12
(25.2)
(25.2)
hydrostatic
SAHR
oscillating, articulating
hydrostatic
30
12
f+r
hydrostatic
3300/4200
0.020
6300/10125
(55/70)
(0.52)
(28/45)
pressurized
10.6
58.1
4M1006JMWW
protection
✓ Transport lashing and lifting points
W
O
L
B396H-1750
✓ Oscillating articulating center joint
✓ 2 scrapers per drum
✓ Suspended operator’s platform
✓ Plastic water tank
✓ Hour meter
✓ Lockable engine cover
✓ Crab walk (1.6 in / 40 mm)
✓ Lockable anti-vandal dashboard
D
(40)
(220)
Technical modifications reserved. Machines may be shown with options.
www.bomag-americas.com
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
Tandem Vibratory Rollers
BW161AD-4 HF, BW190AD-4 HF
BW 161 AD-4 HF - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.1
4.1
4.1
4.1
4.1
area coverage
sq yd/hr
6625
4416
3312
2650
2208
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
522
697
871
1045
348
464
581
697
261
348
435
522
209
279
348
418
174
232
290
348
BW 190AD-4 HF - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.1
4.1
4.1
4.1
4.1
area coverage
sq yd/hr
7887
5258
3944
3155
2629
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
622
829
1037
1244
415
553
691
829
311
415
518
622
249
332
415
498
207
276
346
415
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of a minimum of 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
Technical Specifications
BW161AD-4 HF, BW190AD-4 HF
H2
H
✓ Hydrostatic travel and vibration drive
✓ 2 amplitudes / 2 frequencies
✓ Hydrostatic articulated steering
✓ Crab steer right/left 6.7" (170mm)
✓ Automatic vibration operation
✓ Individual drum vibration control
✓ Operator's platform with:
- two (2) steering wheels
- adjustable seating position
✓ 2 travel levers with integrated
switches for vibration
✓ Vehicle electronics with modular
circuit technology
✓ High capacity plastic water tanks
✓ Pressurized water spray with
2 spray pumps
✓ Folding scraper design
✓ 4 integrated worklights
* Indicator and hazard lights
✓ ROPS/FOPS with seat belt
✓ Back-up alarm
Optional Equipment
ROPS cabin with seat belt
with/without heating
+ outside mirror
Rotary beacon
Speedometer
Edge cutter
Special painting
Environmentally friendly oil
W
D
Dimensions in inches (mm)
A
BW161AD-4 HF 129.9
(3300)
BW190AD-4 HF
129.9
(3300)
A
L
B
72.44
(1840)
85.04
(2160)
C
27.56
(700)
28.15
(715)
Technical data
D
48.03
(1220)
48.03
(1220)
H
91.34
(2320)
91.34
(2320)
O
B
H2
118.11
(3000)
118.11
(3000)
K
15.75
(400)
13.78
(350)
L
177.95
(4520)
177.95
(4520)
O
3.15
(80)
3.15
(80)
BOMAG
BW161AD-4 HF
BOMAG
BW190 AD-4 HF
W
66.1
(1680)
78.74
(2000)
Weights
Basic Weight with ROPS ......................... lbs
Operating Weight .................................... lbs
Axle load (front) ...................................... lbs
Axle load (rear) ........................................ lbs
Average static linear load.......................... pli
(kg)
(kg)
(kg)
(kg)
(kg/cm)
19511
21826
11079
10748
165.1
(8850)
(9900)
(5025)
(4875)
(29.5)
25353
26015
12895
13120
165.2
(11500)
(11800)
(5849)
(5951)
(28.75)
Dimensions
Rolling width........................................... in
Transport height ...................................... in
Track Radius, inner.................................. in
Dimensions..............................................
(mm)
(mm)
(mm)
66.1
118.11
173.2
see sketch
(1679)
(3000)
(4400)
78.7
118.11
166.93
see sketch
(2000)
(3000)
(4240)
Driving Characteristics (depending on site conditions)
Speed (1) ................................................. mph (kmph)
Speed (2) ................................................. mph (kmph)
Max. gradeability ..................................... %
0-3.5
0-7.0
40
(0-5.7)
(0-11.3)
0-3.5
0-7.0
40
(0-5.7)
(0-11.3)
Drive
Engine manufacturer ...............................
Type.........................................................
Cooling....................................................
Number of cylinders ................................
Performance SAE J1349 .......................... hp (kW)
Speed ....................................................... rpm
Fuel..........................................................
Electric Equipment .................................. V
Drive System............................................
Drum Driven...........................................
Deutz
BF4M 2012 C
water
4
131
(98)
2300
diesel
12
hydrostatic
f+r
Deutz
BF4M 2012 C
water
4
131
(98)
2300
diesel
12
hydrostatic
f+r
Brakes
Service brake............................................
Parking brake...........................................
hydrostatic
SAHR
hydrostatic
SAHR
Steering
Steering system ........................................
Steering method.......................................
Steering angle +/-..................................... degrees
Oscillating angle +/-................................. degrees
oscillating, articulating
hydrostatic
30
6
oscillating, articulating
hydrostatic
30
6
Vibratory system
Vibrating drum........................................
Drive system ............................................
Frequency - (low/high) ............................ vpm (Hz)
Amplitude - (low/high)............................ in (mm)
Centrifugal force - (low/high) ................. lbs (kN)
f, r, f + r
hydrostatic
2700/3600 (45/60)
0.016/0.036 (0.41/0.91)
27225/36000 (121/160)
f, r, f + r
hydrostatic
2880/3600 (48/60)
0.015/0.034 (0.37/0.86)
28800/40950 (128/182)
Water Spray System
Type of system .........................................
Back-up system........................................
pressurized
2nd pump
pressurized
2nd pump
Capacities
Fuel.......................................................... gal
Water....................................................... gal
Engine Oil ............................................... gal
(l)
(l)
(l)
52.8
264.2
2.5
(200)
(1000)
(9.5)
52.8
264.2
2.5
(200)
(1000)
(9.5)
Technical modifications reserved. Machines may be shown with options.
www.bomag-americas.com
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
3M607PETP
Standard Equipment
C
K
B356H-1902
Shipping dimensions
in cubic feet (m3) without/with ROPS
BW 161 AD-4 HF 681.4 (19.30) 881.1 (24.95)
BW 190AD-4 HF 799.9 (22.65) 1034.4 (29.29)
Tandem Vibratory Rollers
B W141AD-4, B W151AD-4
BW141AD-4 - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.1
4.1
4.1
4.1
4.1
area coverage
sq yd/hr
5923
3949
2962
2369
1974
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
467
623
779
934
311
415
519
623
234
311
389
467
187
249
311
374
156
208
260
311
BW151AD-4 - ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
4.1
4.1
4.1
4.1
4.1
area coverage
sq yd/hr
6625
4416
3312
2650
2208
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
522
697
871
1045
348
464
581
697
261
348
435
522
209
279
348
418
174
232
290
348
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of a minimum of 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
Technical Specifications
B W141AD-4, B W151AD-4
H2
H
✓ Hydrostatic travel and vibration drive
✓ 2 amplitudes / 2 frequencies
✓ Hydrostatic articulated steering
✓ Crab steer right/left 6.7" (170mm)
✓ Automatic vibration operation
✓ Individual drum vibration control
✓ Operator's platform with:
- two (2) steering wheels
- adjustable seating position
✓ 2 travel levers with integrated
switches for vibration
✓ Vehicle electronics with modular
circuit technology
✓ High capacity plastic water tanks
✓ Pressurized water spray with
2 spray pumps
✓ Folding scraper design
✓ 4 integrated worklights
* Indicator and hazard lights
✓ ROPS/FOPS with seat belt
✓ Back-up alarm
✓ Speedometer
Optional Equipment
ROPS cabin with seat belt
with/without heating
+ outside mirror
Rotary beacon
Edge cutter
Special painting
Environmentally friendly oil
Air Condition
W
D
Dimensions in inches (mm)
A
BW141AD-4
129.9
(3300)
BW151AD-4
129.9
(3300)
A
L
B
65.4
(1660)
72.4
(1840)
C
28.0
(710)
28.15
(715)
Technical data
D
48.03
(1220)
48.03
(1220)
H
91.34
(2320)
91.34
(2320)
O
B
H2
118.11
(3000)
118.11
(3000)
K
15.75
(400)
15.75
(400)
BOMAG
BW141AD-4
L
177.95
(4520)
177.95
(4520)
O
3.15
(80)
3.15
(80)
W
59.1
(1500)
66.1
(1680)
BOMAG
BW151 AD-4 HF
Weights
Basic Weight with ROPS ......................... lbs
Operating Weight .................................... lbs
Axle load (front) ...................................... lbs
Axle load (rear) ........................................ lbs
Average static linear load (front) .............. pli
Average static linear load (rear) ................ pli
(kg)
(kg)
(kg)
(kg)
(kg/cm)
(kg/cm)
16035
17137
8157
8378
138
141.8
(7273)
(7773)
(3700)
(3800)
(24.7)
(25.3)
16917
17798
8598
8819
130.1
133.4
(7673)
(8073)
(3900)
(4000)
(23)
(24)
Dimensions
Track Radius, inner.................................. in
Dimensions..............................................
(mm)
176.8
see sketch
(4490)
173.2
see sketch
(4400)
Driving Characteristics (depending on site conditions)
Speed ....................................................... mph (kmph)
Max. gradeability ..................................... %
0-6.5
40
(0-10.5)
0-6.5
40
(0-10.5)
Drive
Engine manufacturer ...............................
Type.........................................................
Cooling....................................................
Number of cylinders ................................
Performance SAE J1349 .......................... hp (kW)
Speed ....................................................... rpm
Fuel..........................................................
Electric Equipment .................................. V
Drive System............................................
Drum Driven...........................................
Deutz
BF4M 2011
Oil
4
80.5
2500
diesel
12
hydrostatic
f+r
(60)
Deutz
BF4M 2011
Oil
4
80.5
(60)
2500
diesel
12
hydrostatic
f+r
Brakes
Service brake............................................
Parking brake...........................................
hydrostatic
SAHR
hydrostatic
SAHR
Steering
Steering system ........................................
Steering method.......................................
Lateral displacement right/left..................in
oscillating, articulating
hydrostatic
oscillating, articulating
hydrostatic
6.7
(170)
Vibratory system
Vibrating drum........................................
Drive system ............................................
Frequency - (low/high) ............................ vpm (Hz)
Amplitude - (low/high)............................ in (mm)
Centrifugal force - (low/high) ................. lbs (kN)
f, r, f + r
hydrostatic
2400/3600 (40/60)
0.013/0.028 (0.34/0.71)
15750/16875 (70/75)
f, r, f + r
hydrostatic
2400/3600 (40/60)
0.012/0.026 (0.31/0.66)
15750/16875 (70/75)
Water Spray System
Type of system .........................................
Back-up system........................................
pressurized
2nd pump
pressurized
2nd pump
Capacities
Fuel.......................................................... gal
Water....................................................... gal
(mm)
(l)
(l)
42.3
211.3
(160)
(800)
42.3
211.3
3M906TTWW
Standard Equipment
C
K
B403H-1713
Shipping dimensions
in cubic feet (m3) without/with ROPS
BW141AD-4
614.7 (17.41) 794.9 (22.51)
BW151AD-4
681.4 (19.30) 881.1 (24.95)
(160)
(800)
Technical modifications reserved. Machines may be shown with options.
www.bomag-americas.com
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
Tandem Vibratory Roller
B W138AD
EARTHWORKS
# passes
2
3
4
5
rolling speed
(mph)
3.7
3.7
3.7
3.7
area coverage
sq yd/hr
4911
3274
2456
1964
“productivity in cu yd/hr by lift thickness, 100% efficiency”
4 inches
6 inches
8 inches
12 inches
546
820
1093
1639
364
546
729
1093
273
410
546
820
219
328
437
656
ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
3.7
3.7
3.7
3.7
3.7
area coverage
sq yd/hr
4911
3274
2456
1964
1637
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
387
516
646
775
258
344
430
516
194
258
323
387
155
207
258
310
129
172
215
258
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacing of a minimum 10 impacts per foot at high vibration frequency setting. Actual compaction efficiency is determined by job conditions.
Technical Specifications
B W138AD
Shipping dimensions
in cubic feet (m3)
without/with ROPS
BW 138 AD
255.4 (7.231) 362.6 (10.268)
Standard Equipment
(SAHR) parking brakes on each drum
✓ Lateral sliding seat and controls assembly
✓ Vibration control in travel lever
✓ Adjustable operator’s seat
✓ Plastic water tank
✓ 2 scrapers per drum
✓ Pressure water spray system with interval
timer
✓ Control and warning indicator lights for:
- Hydraulic oil temperature
- Engine oil pressure and
temperature
- Battery
- Brakes
✓ Hour meter
✓ Lockable engine cover
✓ Vandal protected instrument panel
✓ Transport lifting points front/rear
✓ Emergency stop button
✓ Rear drum vibration lock out
✓ Corrosion and weather protected ignition
switch
✓ ROPS with seat belt
✓ 2 vibration modes automatic /manual
✓ Auto water spray stop in neutral
✓ Back-up alarm
Optional Equipment
Flashers
Working lights (front & rear)
Edge cutter
Tool kit
Special paint
Dimensions in inches (mm)
A
B
C
D
H
H2
K
L
O
S
W
BW 138AD
70.5
57.5
25.6 31.9 75
106.5 12.8 102.4 1.6 0.87 54.3
(1790) (1460) (650) (810) (1905) (2705) (325) (2600) (40) (22) (1380)
Technical data
BOMAG
BW 138AD
Weights
Basic Weight with ROPS .................................... lbs
Operating Weight ............................................... lbs
Average axle load f/r............................................ lbs
Average static linear load CECE f/r..................... pli
(kg)
(kg)
(kg)
(kg/cm)
8765
9235
4555/4680
83.9/86.2
(3976)
(4189)
(2066/2123)
(15.0/15.4)
Dimensions
Track Radius, inner............................................. in
Dimensions.........................................................
(mm)
142.13
see sketch
(3610)
Driving Characteristics (depending on site conditions)
Speed (with vibration)......................................... mph (kmph)
Speed (for transport)........................................... mph (kmph)
Max. gradeability without/with vibration............ %
0-3.7
0-6.2
40/30
(0-6.0)
(0-10.0)
Drive
Engine manufacturer...........................................
Type....................................................................
Cooling - cylinder heads .....................................
Cooling - cylinder liners .....................................
Number of cylinders ...........................................
Performance ISO 9249 (max) ............................. hp (kW)
Speed (max) ........................................................ rpm
Performance SAE J1349 (max) ........................... hp (kW)
Speed (max) ........................................................ rpm
Throttle position 1.............................................. rpm
Throttle position 2.............................................. rpm
Electric Equipment ............................................. V
Drive System.......................................................
Drum Driven......................................................
Deutz
F3L 2011
Air
Oil
3
46.2
2800
45.6
2800
2250
2850
12
hydrostatic
f+r
Brakes
Service brake.......................................................
Parking brake ......................................................
hydrostatic
SAHR
Steering
Steering system ...................................................
Steering method..................................................
Steering angle +/- ................................................ degrees
Oscillating angle +/-............................................ degrees
oscillating, articulating
hydrostatic
25
13
Vibratory system
Vibrating drum...................................................
Drive system .......................................................
Frequency ........................................................... vpm (Hz)
Amplitude........................................................... in
(mm)
Centrifugal force (each drum)............................. lbs (kN)
f + r, f
hydrostatic
3240/3600
0.016
9675/11925
Water Spray System
Type of water spray system..................................
pressurized
Capacities
Fuel..................................................................... gal
Water .................................................................. gal
Technical modifications reserved. Machines may be shown with options.
(l)
(l)
14.5
60.8
(34)
(34)
(54/60)
(0.4)
(43/53)
(55)
(230)
B98H-1540 3M306JMWW
✓ Hydrostatic travel and vibration drives
✓ Bolt-on oscillating/articulation joint
✓ Hydrostatic articulated steering
✓ Spring-Applied, Hydraulically-Released
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
www.bomag-americas.com
Tandem Vibratory Roller
B W135AD
EARTHWORKS
# passes
2
3
4
5
rolling speed
(mph)
3.1
3.1
3.1
3.1
area coverage
sq yd/hr
3880
2587
1940
1552
“productivity in cu yd/hr by lift thickness, 100% efficiency”
4 inches
6 inches
8 inches
12 inches
432
648
863
1295
288
432
576
863
216
324
432
648
173
259
345
518
ASPHALTIC CONCRETE (material weight 140 lb/cu ft)
# passes
2
3
4
5
6
rolling speed
(mph)
3.1
3.1
3.1
3.1
3.1
area coverage
sq yd/hr
3880
2587
1940
1552
1293
“productivity in tons/hr by lift thickness, 100% efficiency”
1.5 inches
2 inches
2.5 inches
3 inches
306
408
510
612
204
272
340
408
153
204
255
306
122
163
204
245
102
136
170
204
Note: Repeat number of passes over the same area is required to achieve specified compaction efficiency/density. Successive passes over same area results in reduced area coverage and productivity.
Rolling speed selected provides impact spacings of a minimum 10 impacts per foot. Actual compaction efficiency is determined by job conditions.
Technical Specifications
B W135AD
H2
Shipping dimensions
in cubic feet (m3)
without/with ROPS
BW 135 AD
239.7 (6.8)
340.7 (9.7)
H
S
C
K
D
Standard Equipment
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Optional Equipment
Working lights (front & rear)
Edge cutter
Tool kit
Special paint
www.bomag-americas.com
Dimensions in inches (mm)
A
B
C
D
H
H2
K
L
O
S
W
BW 135 AD
70.5
54.3
25.6 31.5 74.8
106.3 12.6 102
1.6 0.66 51.2
(1790) (1380) (650) (800) (1900) (2700) (320) (2590) (40) (17) (1300)
Technical data
BOMAG
BW 135 AD
Weights
Basic Weight with ROPS .................................... lbs
Operating Weight ............................................... lbs
Average axle load................................................. lbs
Average static linear load CECE.......................... pli
(kg)
(kg)
(kg)
(kg/cm)
7330
7853
3910
76
(3325)
(3562)
(1772)
(13.6)
Dimensions
Length with ROPS ............................................. in
Track Radius, inner............................................. in
Dimensions.........................................................
(mm)
(mm)
102.0
143.7
see sketch
(2590)
(3650)
Driving Characteristics (depending on site conditions)
Speed (with vibration)......................................... mph (kmph)
Speed (for transport)........................................... mph (kmph)
Max. gradeability without/with vibration............ %
0-3.1
0-6.2
40/30
(0-5.0)
(0-10.0)
Drive
Engine manufacturer...........................................
Type....................................................................
Cooling - cylinder heads .....................................
Cooling - cylinder liners .....................................
Number of cylinders ...........................................
Performance ISO 9249 (max) ............................. hp (kW)
Speed (max) ........................................................ rpm
Performance SAE J1349 (max) ........................... hp (kW)
Speed (max) ........................................................ rpm
Throttle position 1.............................................. rpm
Throttle position 2.............................................. rpm
Electric Equipment ............................................. V
Drive System.......................................................
Drum Driven......................................................
Deutz
F3L 2011
Air
Oil
3
46.2
2800
45.6
2800
2200
2700
12
hydrostatic
f+r
Brakes
Service brake.......................................................
Parking brake ......................................................
hydrostatic
SAHR
Steering
Steering system ...................................................
Steering method..................................................
Steering angle +/- ................................................ degrees
Oscillating angle +/-............................................ degrees
oscillating, articulating
hydrostatic
25
13
Vibratory system
Vibrating drum...................................................
Drive system .......................................................
Frequency ........................................................... vpm (Hz)
Amplitude........................................................... in
(mm)
Centrifugal force (each drum)............................. lbs (kN)
f + r, f
hydrostatic
3560/3960
0.016
8145/10060
Water Spray System
Type of water spray system..................................
pressurized
Capacities
Fuel..................................................................... gal
Water .................................................................. gal
Engine oil ........................................................... gal
(l)
(l)
(l)
14.5
60.8
1.7
(34)
(34)
(59.4/66)
(0.4)
(36.2/44.7)
3M306JMWW
✓
drives
Bolt-on oscillating/articulation
joint
Hydrostatic articulated steering
Spring-Applied, HydraulicallyReleased (SAHR) parking brakes
on each drum
Lateral sliding seat and controls
assembly
Vibration control in travel lever
Adjustable operator’s seat
Plastic water tank
2 scrapers per drum
Pressure water spray system with
interval timer
Control and warning indicator
lights for:
- Hydraulic oil temperature
- Engine oil pressure and
temperature
- Battery
- Brakes
Hour meter
Lockable engine cover
Vandal protected instrument
panel
Transport lifting points front/rear
Emergency stop button
ROPS with seat belt
Rear drum vibration lock out
Corrosion and weather protected
ignition switch
Back-up alarm
O
B161H-1539
✓ Hydrostatic travel and vibration
W
B
A
L
(55)
(230)
(6.5)
Technical modifications reserved. Machines may be shown with options.
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
Single Drum Vibratory Roller
B W213DH-4 B VC
INTELLIGENT
COMPACTION
MODEL
BW213DH-4 BVC
MODEL
BW213DH-4 BVC
™
Compaction Output (cu. yd/h) at recommended soil layer/lift thickness. *
Rock Fill
Gravel, Sand
Mixed Soils
Silt, Clay
916 - 1831
628 - 1256
471 - 942
275 - 549
Compaction Layer Thickness (in).*
Rock Fill
Gravel, Sand
Mixed Soils
Silt, Clay
47.2
31.5
23.6
11.8
* Compaction output influenced by soil/material type and moisture content.
Technical Specifications
B W213DH-4 B VC
H2
H
without/with ROPS/FOPS
1046.6 (29.6) 1371.5 (38.8)
K
W
B
O1
L
Standard Equipment
Warning, information and operation
displays with LCD
Steering with hand wheel integrated
in left hand arm rest
Hydrostatic travel and vibration drive
BOMAG Variocontrol
Measuring System BTM prof
Anti Slip Control (ASC)
Hydrostatic articulated steering
Articulated joint lock
Rear axle with twin spring
accumulator brakes
No-Spin differential lock
Seat contact switch
Warning horn
Single lever control for travel and
vibration
Swivel seat, adjustable in height and
longitudinal direction, with two
armrests and seatback with
inclination adjustment
Scrapers (plastic)
Towing hooks front/rear
Emergency STOP
Noise insulation
Back-up warning system
ROPS/FOPS with safety belt
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
Optional Equipment
Lockable control panel
Rotary beacon
ROPS cabin with seat belts
Working lights front/rear
Contact scrapers (Steel)
BCM05
Special paint
Environmentally compliant
hydraulic oil
Air condition
Sun roof
Indicator and hazard lights
Adjustable steering wheel
Warning, information and
operation displays
Dimensions inches (mm)
A
B
BW 213DH-4 BVC 116.5 (2960) 88.6 (2250)
D
59.1 (1500)
H
89.3 (2268)
H2
117 (2972)
K
L
O1
19.3 (490) 228.7 (5808) 2.4 (60)
Technical data
Weights
Basic Weight............................................................................................. lbs (kg)
Operating Weight with ROPS Cabin ....................................................... lbs (kg)
Axle load, drum........................................................................................ lbs (kg)
Axle load, wheels ...................................................................................... lbs (kg)
Static linear load (drum)........................................................................... pli (kg/cm)
Dimensions
Working width ......................................................................................... in
(mm)
Track Radius, inner .................................................................................. in
(mm)
Dimensions ..............................................................................................
Driving Characteristics (depending on site conditions)
Speed (1) .................................................................................................. mph (kmph)
Max. gradeability without/with vibration ................................................. %
Drive
Engine manufacturer ................................................................................
Type .........................................................................................................
Cooling ....................................................................................................
Number of cylinders.................................................................................
Performance ISO 9249............................................................................. hp (kW)
Speed........................................................................................................ rpm
Performance SAE J 1995 .......................................................................... hp (kW)
Speed........................................................................................................ rpm
Fuel ..........................................................................................................
Electric Equipment................................................................................... V
Drive System ............................................................................................
Drum Driven ...........................................................................................
Drums and Tires
Tire size ....................................................................................................
Brakes
Service brake ............................................................................................
Parking brake............................................................................................
Steering
Steering system .........................................................................................
Steering method .......................................................................................
Steering angle +/-...................................................................................... degrees
Oscillating angle +/- ................................................................................. degrees
Vibratory system
Drive system.............................................................................................
Variocontrol .............................................................................................
Frequency................................................................................................. vpm (Hz)
Amplitude ................................................................................................ in
(mm)
Centrifugal force....................................................................................... lbs (kN)
Capacities
Fuel .......................................................................................................... gal (l)
O2
S
2.4 (60) 1.4 (35)
O2
W
83.9 (2130)
BOMAG
BW 213DH-4 BVC
31976
32849
20283
12566
241.8
(14505)
(14900)
(9200)
(5700)
(43.2)
83.9
137.6
see sketch
(2130)
(3494)
0-8.1
53/50
(0-13)
Deutz
BF4M 1013 EC
Water
4
155
(114)
2200
153
(114)
2200
diesel
12
hydrostatic
standard
23.1/18-26/12PR
hydrostatic
SAHR
oscil., artic.
hydrostatic
35
12
3M805JMWW
D
A
hydrostatic
Standard
1680
0-0.094
82125
(28)
(0-2.40)
(365)
89.8
(340)
B407H-1294
Shipping dimensions
in cubic feet (m3)
BW 213DH-4 BVC
S
Technical modifications reserved. Machines may be shown with options.
BOMAG Americas, Inc.
2000 Kentville Rd. • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350
www.bomag-americas.com
Vibratory Tamper
B T60/4 B T65/4
MODEL
Compaction Output (cu. yd/h) at recommended soil layer/lift thickness. *
Gravel, Sand
Mixed Soils
Silt, Clay
BT60/4
14.4 - 19.6
10.5 - 14.4
7.8 - 11.8
BT65/4
17.0 - 20.9
10.5 - 15.7
9.2 - 13.1
* Compaction output influenced by soil/material type and moisture content.
Technical Specifications
B T60/4 B T65/4
8.7
9.1
(0.247)
(0.257)
Standard Equipment
✓ Electronic Ignition
✓ Oil Lubrication
✓ Corrosion-free plastic fuel tank
✓ Polyethylene shoe with wear plate
✓ Centrifugal clutch
✓ Infinitely variable frequency
✓ Safe operation, anti-vibration handle
with shut-down switch
✓ Large capacity air filter
✓ Diaphragm carburetor
✓ Recoil starter with integral guard
✓ Narrow bellows
✓ Engine protection guards
Optional Equipment
Transport wheels
Interchangeable 6 in. (BT60/4),
9 in., 11 in. and 13 in. (BT65/4) shoes
Tamper Foot Extensions
(5.9”x4.7” - BT60/4)
L1
W
L
B
Dimensions
inches (mm)
B
H
L
L1
W
BT60/4
BT65/4
13.8 (350)
13.8 (350)
37.8 (960)
39.4 (1000)
28.9 (735)
28.9 (735)
13.2 (335)
13.2 (335)
11.0 (280)
11.0 (280)
Technical data
Weights
Basic weight ................................................. lbs
Operating weight ........................................ lbs
BOMAG
BT60/4
(kg)
(kg)
135
137
BOMAG
BT65/4
(61)
(62)
148
150
(67)
(68)
Dimensions
Dimensions..................................................
see sketch
Driving characteristics (depending on site conditions)
Working speed max...................................... ft/min (m/min)
Area coverage max........................................ sq ft/h (m2/h)
65.6
3616
Drive
Engine manufacturer....................................
Type.............................................................
Cooling........................................................
Number of cylinders ....................................
Displacement ............................................... in3
Performance ISO 9249 ................................ hp
Speed ...........................................................
Performance SAE ......................................... hp
Speed ........................................................... rpm
Fuel..............................................................
Fuel consumption max................................. gal/h
Starting device..............................................
Honda
GX 100 (4-cycle)
air
1
6.0
(98)
3.39
(2.5)
4200
3.35
(2.5)
4200
gasoline
0.22
(0.83)
recoil starter
Honda
GX 100 (4-cycle)
air
1
6.0
(98)
3.39
(2.5)
4200
3.35
(2.5)
4200
gasoline
0.22
(0.83)
recoil starter
(cm3)
(kW)
(kW)
(l/h)
see sketch
(20)
(336)
65.6
3616
(20)
(336)
Vibratory System
Drive system ................................................
Frequency..................................................... bpm
Jumping height ............................................ in
Impact force................................................. lbs
Compaction depth max ............................... in
(Hz)
(mm)
(kN)
(cm)
mechanical
540-708 (9-11.8)
2.4
(60)
3038
(13.5)
21.7
(55)
mechanical
540-708 (9-11.8)
2.8
(70)
3645
(16.2)
25.6
(65)
Capacities
Fuel.............................................................. gal
Lubricating oil (tamper cylinder) ................. gal
(l)
(l)
0.8
0.3
0.8
0.3
(3)
(1)
(3)
(1)
B37H-882 3M604TTWW
Shipping dimensions
in cubic feet (m3)
BT60/4
BT65/4
H
Technical modifications reserved. Machine may be shown with options.
www.bomag-americas.com
2000 Kentville Road • Kewanee, IL 61443
Tel: 309 853-3571 • Fax: 309 852-0350