Luận án tiến sĩ Kỹ thuật: Nghiên cứu xây dựng phương pháp thiết kế kỹ thuật trang phục ứng dụng mô phỏng 3 chiều

ign 39,
[36]
[37]
[38]

[39]

pp.568-582.
In Hwan Sul, (2010) “Fast cloth collision detection using collision matrix”.
International Journal of Clothing Science and Technology Vol. 22, pp. 145-160.
J. Mc. Cartney, B.K Hinds, B.L Seow, (1999) “The flattenning of trianglated surfaces
in corporating darts and gussets”, Coputer-Aided Design 31: 249-260.
Jin Wang, Guo-dong Lu, Ji-tuo Li, Long Chen and Dong-liang Zhang (2007), Pattern
design on 3D triangular garment surfaces, Journal of Zhejiang University - Science A
Volume 8, Number 10, 1642-1649, DOI: 10.1631/jzus.A1642 .
Jin Wang, Guo-Dong Lu, Wei-Long Li, Long Chen, Yoshiyuki Sakaguti (2009),

“Interactive 3D garment design with constrained contour curves and style curves”.
Computer-Aided Design 41(9): 614-625.
[40] Jituo Li, Juntao Ye, Yangsheng Wang, Li Bai, Guodong Lu, (2010) “Fitting 3D
garment models onto individual human models”, Computers & Graphics 34, pp 742755
[41] Jun-Ming Lu, Mao-Jiun J. Wang, Chien-Wen Chen, Jyi-Hua Wu, (2010) “The
development of an intelligent system for customized clothing making”. Expert Systems
with Applications 37, pp 799-803.
[42] Jinlian Hu, (2011) “Computer technology for textiles and apparel”, Woodhead
Publishing Series in Textiles: Number 121.

143


[43] Jing-Jing Fang, Yu Ding, (2014) "Energy-based optimal darted pattern for

garment design", International Journal of Clothing Science and Technology, Vol. 26
Issue: 2, pp.164-183.
[44] Jun Zhang, Noriaki Innami, KyoungOk Kim, Masayuki Takatera, (2015) "Upper
garment 3D modeling for pattern making", International Journal of Clothing Science
and Technology, Vol. 27 Issue: 6, pp.852-869.
[45] Kaixuan Liu, Jianping Wang, Chun Zhu,Yan Hong, (2016) "Development of upper
cycling clothes using 3D-to-2D flattening technology and evaluation of dynamic
wear comfort from the aspect of clothing pressure", International Journal of
Clothing Science and Technology, Vol. 28 Issue: 6, pp.736-749.
[46] Krzywinski S, Siegmund J, (2017) “3D Product Development for Loose-Fitting
Garments Based on Parametric Huma Models”, Journal of Fashion Technology &
Textile Engineering S3:005.
[47] Li J, Wang Y, (2007) “Automatically constructing skeletons and parametric structures
for polygonal human bodies”. CGI 2007:151–6.
[48] Lutz Walter, George-Alexander Kartsounis, Stefano Carosio (2009), “ Transformer
Clothing Production into a Demand-driven, Knowledge-based, High-tech Industry”,
Springer Science Business Media.
[49] Lucie Gaget, (2018) “Top 9 of the best CAD fashion design software”.
< />
[50] Matthew M. F. Yuen and C. C. Chan, (1998) “A Spring–Mass Model-based Approach
for Warping Cloth Patterns on 3D Objects”, The journal of Visualization and
Computer Animation No 9, 215 - 227.
[51] Marzia Fontana, Caterina Rizzi, Umberto Cugini (2005), “3D virtual apparel design
for industrial applications”. Computer-Aided Design 37: pp 609-622.
[52] Marzia Fontana, Caterina Rizzi, Umberto Cugini, (2006) “A CAD-oriented cloth
simulation system with stable and efficient ODE solution”, Computers & Graphics 30,
pp. 391-406.
[53] Olga Troynikov and Elnaz Ashayeri, (2011) “3D body scanning method for closefitting garments in sport and medical applications”, HFESA 47th Annual Conference
2011. Ergonomics Australia-Speciaal Edition.
[54] Olaru Sabinaa , Filipescu Emilia , Avădanei Manuela , Mocenco Alexandra , Popescu

Georgeta , Săliștean Adrian, (2015) “Applied 3D Virtual Try-on for Bodies with
Atypical Characteristics”, Procedia Engineering, Volume 100, Pages 672-681.
[55] P. Voline, N.Magnenat-Thalmann, (2013) “Sketch-Based Garment Design with Quad
Meshes”, Computer-Aided Design, pages 562-567, ISSN 0010-4485.
[56] Slavenka Petrak, Dubravko Rogale, (2006) "Systematic representation and
application of a 3D computer‐aided garment construction method: Part I: 3D
144


garment basic cut construction on a virtual body model", International Journal of
Clothing Science and Technology, Vol. 18 Issue: 3, pp.179-187.
[57] Shin-Wen Hsiao, Rong-Qi Chen, (2013) “A study of surface reconstruction for 3D
mannequins based on feature curves”, Computer-Aided Design 45, 1426-1441.
[58] Sungmin Kim, (2015) "Analysis of human body surface shape using parametric
design method", International Journal of Clothing Science and Technology, Vol. 27
Issue: 3, pp.434-446.
[59] Shuixian Hu, Ruomei Wang, Fan Zhou, (2017) "An efficient multi-layer garment
virtual fitting algorithm based on the geometric method", International Journal of
Clothing Science and Technology, Vol. 29 Issue: 1, pp.25-38.
[60] Turquin E, Wither J, Boissieux L, Cani MP, Hughes JF (2007), “A sketch-based
interface for clothing virtual characters”, IEEE Comput Graph Appl 2007;27(1):72–
81.
[61] [TC]2 2010, 3D Body Scanning & Technology Development, viewed 10 October 2010
<>.
[62] Victor Kuzmichev, Aleksei Moskvin,Evgenii Surzhenko, Mariia Moskvina,
(2017) "Computer reconstruction of 19th century trousers", International Journal
of Clothing Science and Technology, Vol. 29 Issue: 4, pp.594-606.
[63] Wang C.C.L., Wang Yu, Matthew M.F. Yuen, (2002)“Feature based 3D garment
design through 2D sketches”, Computer-Aided Design 35, pp. 659-672.
[64] Wang C.C.L., Shana S. -F.Smith, Matthew M.F.Yuen, (2002) “Surface flattening

based on energy model”, Computer - Aided Design 34, pp. 823-833.
[65] Wang C.C.L., Wang Y, Yuen MMF (2005), “Design automation for customized
apparel products”. Comput Aided Design 37 : pp 675-91.
[66] Wang C.C.L., (2005)“Parameterization and parametric design of mannequins”
Computer-Aided Design 37: pp 83-98.
[67] Wang, Zhaohui (2008) “A study of ease distribution in relation to jacket pattern
alteration”. Diss. The Hong Kong Polytechnic University.
[68] Wioletta Sybilska, Lidia Napieralska & Elizbieta Mielicka, (2010) “Analysis of
measurements using a 3D contactless scanning method”, AUTEX Research Journal,
Vol.10, No3.
[69] Xiao-Jing Zhou and Zheng-Xu Zhao, (2009) “The skin deformation of a 3D virtual
human”, international journal of Automation and Computing, Nov, 344-350.
[70] Xuyuan Tao, Pascal Bruniaux, (2013) “Toward advanced three ‐dimensional
modeling of garment prototype from draping technique”, International Journal of
Clothing Science and Technology, Volume: 25 Issue: 4.

145


[71] Xiaona Chen, Jianping Wang, (2015) "Breast volume measurement by mesh
projection method based on 3D point cloud data", International Journal of Clothing
Science and Technology, Vol. 27 Issue: 2, pp.221-236.
[72] Xianyi Zeng, Kaixuan Liu, Yan Chen, Min Dong, Yan Hong (2017) "Virtual
reality-based collaborative design method for designing customized garment for
disabled people with scoliosis", International Journal of Clothing Science and
Technology, Vol. 29 Issue: 2, pp.226-237.
[73] Yu-Lei Geng, Guo-Dong Lu, Jin Wang, Wei-Long Li, (2009) “Sketch-Based 3D
Sleeve Modeling and Reusing Method for Garment CAD”, CSIE (1) : 711-715.
[74] Yong-Jin Liu, Dong-Liang Zhang, Matthew Ming-Fai Yuen, (2010), “A survey on
CAD methods in 3D garment design”, Computer in Industry 61, 576-593.

[75] Yuwei Meng, P.Y. Mok, Xiaogang Jin, (2010) “Interactive virtual try-on clothing
design systems”, Computer-Aided Design 42, pp 310-321.
[76] Yu-Lei Geng, Jin Wang, Guo-Dong Lu, Zheng Liu, Gang Chen, (2011) “Sketch based
garment modeling on an arbitrary view of a 3D virtual human model”, Journal of
Zhejiang University - Science C 12(3): 195-203.
[77] Yuwei Meng, P.Y.Mok, Xiaogang Jin, (2012) “Computer aided clothing patter design
with 3D editing and pattern alteration”, Computer - Aided Design 44, 721-734.
[78] Yunchu Yang, Fengyuan Zou, Zhong Li, Xiaofen Ji (2011) “Development of a
Prototype Pattern Based on the 3D Surface Flattening Method for MTM Garment
Production”, FIBRES & TEXTILES in Eastern Europe, Vol. 19, No. 5.
[79] Yuko Mesuda, Shigeru Inui, Yosuke Horiba, (2018) “Virtual draping by mapping”,
Computers in Industry, Volume 95, Pages 93-101.
[80] />[81] />[82] />
146


DANH MỤC CÁC CÔNG TRÌNH ĐÃ CÔNG BỐ CỦA LUẬN ÁN
[1] Lưu Hoàng, Ngô Chí Trung (2016), Xây dựng lưới bề mặt cơ thể người phục vụ thiết kế

quần áo 3 chiều, Tạp chí khoa học & Công nghệ, Đại học Sư phạm kỹ thuật Hưng Yên
(ISSN 2354-0575), số 11, trang 98-104.
[2] Lưu Hoàng, Ngô Chí Trung (2016), Nghiên cứu xây dựng lưới quần áo 3 chiều dựa trên

lưới bề mặt cơ thể người, Tạp chí Cơ khí Việt Nam, số 10, trang 74-82.
[3] Lưu Hoàng, Ngô Chí Trung (2017), Trải phẳng mẫu chi tiết quần áo từ 3 chiều sang 2

chiều bằng phương pháp sử dụng ngôn ngữ lập trình trực quan trong thiết kế quần áo
ứng dụng mô phỏng 3 chiều, Tạp chí Cơ khí Việt Nam, số 9, trang 115-125.
[4] Lưu Hoàng, Ngô Chí Trung (2017), Xử lý dữ liệu quét mẫu cơ thể người phục vụ thiết

kế quần áo 3 chiều, Tạp chí khoa học & Công nghệ, Đại học Sư phạm kỹ thuật Hưng
Yên (ISSN 2354-0575), số 16, trang 43-49.
[5] Luu Hoang, Ngo Chi Trung (2018), Research on the flattening of the 3D clothing pattern

into 2D clothing parts, The first International Conference on Material, Machines and
Methods for Sustainable Development (MMS2018), Vol 1, Da Nang, Viet Nam, pp 452459.

147


PHỤ LỤC

- PHỤ LỤC 1. XỬ LÝ MẪU QUÉT
- PHỤ LỤC 2. KẾT QUẢ QUÉT MẪU
- PHỤ LỤC 3. MẪU PHIẾU CHUYÊN GIA
- PHỤ LỤC 4. HƯỚNG DẪN SỬ DỤNG CHƯƠNG TRÌNH THIẾT KẾ MẪU

148


PHỤ LỤC 3. MẪU PHIẾU CHUYÊN GIA

149