KRONE - Datasheet - Cat 6 - Cable - S-STP LSZH-FR

Copper wire
AWG 23/1
core insulation
Aluminium foil
copper braid
outer jacket
Category 6
Installation Cable
S-STP, LSZH
KRONE Far East
70 Bendemeer Road #06-02
Hiap Huat House Singapore 339940
Phone

+65 6538-8628
Fax

+65 6538-8636


Application:
n Installation cable within
structured cabling systems
acc. to prDIN EN 50173
(2001-10)
n To be used in pathway
systems
Possible Services:
n Ethernet 10 BaseT
n Fast Ethernet 100 BaseT
n Gigabit Ethernet 1000 BaseT

n ATM 155 Mbit/s
n TP-PMD 125 Mbit/s
n Cable Sharing (Same or
different services)
n CDDI & TPDDI (FDDI on copper)
n Token Ring with 4/16 Mbit/s
n Analogue Telephone, ISDN
Profile view:
KRONE
Premis
NET


®
(97045)-02.2002 subject to changes
Thermal characteristcs:
Transport and storage -20°C up to + 60°C
Installation 0°C up to + 50°C
Operation -20°C up to + 60°C
Chemical Characteristics:
Resistance to: LSZH:
n Oil, fuel no
n Acid, leach low
n Organic solvents yes
Fire Performance:
Flame retardent ISO 60332-1, 60332-3 Kat.C
Smoke density IEC 61034-1, 61034-2
Halogen-free IEC 60754-2
Corrosive gases no
Propagation of fire no

Heat of combastion 670 kJ/m (0,19 kwh/m)
Electrical Characteristics:
DC loop resistance typ. 158 Ohm/km
Resistance unbalance max. 2 %
Mutual capacity 45 pF/m
Nominal velocity of
Propagation (NVP-value) 80 % (0,8 c)
Impedance 100 +/- 15 Ohm
Screening attenuation up to1000 MHz/min. 60dB
Transfer impedance at 10MHz nom. 5mOhm/m
Insertion Loss and NEXT see table
Frequency [MHz] 1 4 10 16 20 31,25 62,5 100 155 200 250 300
Insertion Loss [dB/100m] 1,9 3,6 5,7 7,2 8,1 10,1 14,4 18,3 23,1 26,2 29,3 32,3
NEXT [dB] 90,0 90,0 90,0 90,0 90,0 90,0 83,0 77,7 72,1 68,9 65,8 63,2
ACR [dB] 88,1 86,4 84,3 82,8 81,9 79,9 68,6 59,4 49,0 42,7 36,5 30,9
ELFEXT [dB] 90,0 90,0 90,0 90,0 90,0 87,0 84,0 73,0 76,0 68,0 66,0 63,0
RL [dB] 30,0 30,0 30,0 30,0 28,0 26,0 25,0 24,0 22,0 20,0 20,0 18,0
Ordering Information Order Number
Cat.6 Installation Cable, S-FTP, LSZH, grey, round, spool 1000 m 66499 1 030-04
Design:
Conductor bare copper wire AWG 23/1 (0,57 mm)
PE-insulation with approx. 0,4 mm
wall thickness,
Core approx. 1,4 mm
Lay up 4 x 2 cores paired
Core colours: wh/bu, wh/og, wh/gn,
wbn, pair in metal foil
Overall shielding Tinned copper braid
Outer jacket Halogen-free and flame retardant
Material (LSFRZH)

Colour: Grey
Outer diameter: 7,6 mm
Printing :
KRONE PREMISNET (tm) 6499 1 030-04
HIGHWIRE LSZH-FR 4PR 23AWG 75C
CATEGORY 6 S/FTP TO TIA/EIA 568
ISO/IEC 11801 MM/YY XXXXX*
*MM-Month;YY-Year;XXXXX-metermarking
Standardisation:
n According to EN 50167, pr DIN EN 50173 (2001-10),
CD2 ISO/IEC 11801 (2
nd
edition 2001-04-19) and
prEN 50288-5-1 (edition January 2001)
n According to European Guideline 73/23/EWG (CE-marking)
n 3 P (Third Party Testing) verified
Mechanical Characteristics:
n Bendradius
During installation 8 x O.D.
Installed 4 x O.D.
n Weight approx. 66 kg/km
Tensile strength 360N
dB
0
10
20
30
40
50
60

70
80
90
100
1 10 100 1000
frequency [MHz]
Insertion Loss [dB/100m] Next [dB]