KRONE - Datasheet - HIGHBAND - Cat 6 - 25 pr

Issue1 - Draft 01/07/04 Form: E104 1of 2

SUBJECT TO CHANGE
23
®






D
ESCRIPTION
: H
IGHBAND
25

C
ATEGORY
6

M
ODULE


P
ART
#: 6468

2

600-00


P
RODUCT
D
ESCRIPTION AND
A
PPLICATION



The HIGHBAND 25 RANGE of modules provides a 24 pair high-density, high performance, cost competitive Category 6 data
grade module, (the 25
th
pair is not used) and a high-density cost competitive 25 pair Category 3 voice grade module to accept
UTP & STP copper cables. It will supplement the existing HIGHBAND™ Range of modules. The upper and lower shell are
moulded in PBT. The Category 6 shield is manufactured from tin plated mild steel. The module is designed for mounting on a
backmount frame.

Modules are terminated with the standard KRONE termination tools 6089 2 003-00 or 6417 2 055-01.
Module may also be terminated with a 110 tool.

A range of accessories is available for mounting, patching, labelling, numbering and disconnecting.




T

ECHNICAL
S
PECIFICATIONS


Environment for use: Indoors or in dry enclosure rated IP54 or greater.
Operating temperature range: -40°C to +80°C
Maximum relative humidity: ≤ 93% non-condensing
Wire range for solid & stranded copper conductors: 0.4-0.65 (26-22 AWG)*

* A maximum of 2 equal, solid conductors only, of up to 0.5 conductor diameter can be terminated per slot. Only 1 conductor of stranded wires per slot can be terminated.
If any conductors >0.5 have been terminated, reversal to smaller conductors in no longer possible.

Wire insulation diameter range (PE, PVC): Typically 0.7-1.4
Number of wire reterminations: Up to 200
Wire insertion force (0.5 conductor diameter): 6N
Wire pull out force, radial (0.5 conductor diameter): 5N
Wire pull out force, axial (0.5 conductor diameter): 35N
Number of patching cycles, Modules: Up to 750
Patch plugs: Up to 200
Transmission & reliability: CAT 6 module: Meet & exceed Category 6 std.
(ISO 11801 & TIA/EIA 568-B.2-1)
CAT 3 module: Meet & exceed Category 3 std.
(ISO 11801 & TIA/EIA 568-B.2)


Change of contact interface resistance after reliability testing < 5mΩ Typical
to ISO/IEC 11801 and TIA/EIA 568B per through connection.
ie. 2 insulation displacement and 1 disconnection contact joint:

Voltage/current rating at 25°C ambient: ≤ 150V AC at 2.5A max.
Dielectric strength: ≥ 1.5kV AC
Surge voltage strength (1.2/50 µsec wave shape): ≥ 2.5kV
Surge current strength (8/20 µsec wave shape) Modules: ≥ 3kA
Patch plugs: ≥ 0.5kA
Insulation resistance: ≥ 50,000 MΩ at 500 VDC
DC Resistance (CAT3) ≤ 0.3Ω to ASTM D4566 @20°C±3
Safety: UL 1863
Flammability rating of plastic housing: UL 94 V0




Issue1 - Draft 01/07/04 Form: E104 2of 2

SUBJECT TO CHANGE
23
®




G
ENERAL
D
IMENSIONS

A
CCESSORIES


PATCH CORD 4 PAIR – RJ45....................................................................6451 2 700-XX

PATCH CORD 4 PAIR – 4 PAIR.................................................................6451 2 701-XX

PATCH CORD 1 PAIR................................................................................ 6451 2 702-XX

LABEL HOLDER..........................................................................................6462 2 408-00

O
THER
R
ELATED
P
RODUCTS


HIGHBAND 25 CATEGORY 3 MODULE.................................................... 6468 2 300-00

BMF KIT 300 PAIR...................................................................................... 6450 1 101-00

BMF KIT 900 PAIR...................................................................................... 6450 1 102-00

CABLE MANAGEMENT KIT 300 PAIR........................................................6450 1 103-00

CABLE MANAGEMENT KIT 900 PAIR........................................................6450 1 104-00


BACK MOUNT FRAME 12 WAY T=83........................................................6450 2 155-00

CABLE MANAGEMENT KIT 300 PAIR........................................................6450 1 103-00

CABLE RING SINGLE .................................................................................6450 1 156-01

CABLE RING DUAL.....................................................................................6450 1 156-02

CABLE TROUGH.........................................................................................6450 2 157-00

COVER SINGLE ..........................................................................................6450 2 158-01

COVER DUAL..............................................................................................6450 2 158-02

Date
Approved By: