Tải bản đầy đủ (.pdf) (2 trang)

Category 5e: K610 Jack to K610 Jack

Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (501.27 KB, 2 trang )

TrueNet
®
Category 5e: K610 Jack to K610 Jack
Hub Switch
Patch Panel
Jacks
Patch

Cord
Cable
Patch Cord
The TrueNet
®
Category 6 system is a fully
integrated family of precisely tuned
components each designed to operate at
optimum performance with the other. TrueNet
Category 5e systems are unmatched in data
throughput and are supported by the most
comprehensive and thorough warranty in the
industry: the TrueNet Zero Bit-Error warranty.
The warranty guarantees that the structured
cabling system will remain error free for a full
5 years and includes a 20-year electrical
performance and free of defect warranty.
The result is a remarkably advanced and high
performing end-to-end channel guaranteed
beyond the typical industry requirements to
maximize network throughput and minimize
downtime. Numerous component options are
available for versatility and flexible adaptation


to meet any infrastructure requirement.
Support Applications:
• 10/100/1000 Base-T (IEEE 802.3xx, 1000
Base-T requires enhance DSP Electronics)
• 4/16 Mb/s Token Ring
• 25,155,622 Mb/s ATM
CHANNEL SPECS
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Active Network Specifications:
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
1326468 6/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
CHANNEL SPECS
Freq Attenuation NEXT ACR Return Loss
(MHz) (dB) (dB) (dB) (dB)
[min] [ [typical] [min] [ [typical] [min] [ [typical] [min] [typical]
1 3.0 1.7 60.0 80.6 57.0 66.4 17.0 31.7
4 4.5 3.3 53.6 68.9 49.1 64.9 17.0 31.7
8 6.3 4.6 48.6 63.1 42.3 60.5 17.0 31.7
10 7.1 5.2 47.0 61.2 39.9 58.6 17.0 31.7
16 9.1 6.7 43.6 57.3 34.5 53.9 17.0 31.7
20 10.2 7.5 42.0 55.4 31.8 51.2 17.0 31.7
25 11.4 8.5 40.4 53.5 28.9 48.3 16.0 30.7

31.25 12.8 9.5 38.7 51.7 25.9 45.1 15.1 29.7
62.5 18.6 14.0 33.6 45.8 14.9 33.8 12.1 26.7
100 24.0 18.2 30.1 41.9 6.0 24.8 10.0 24.7
• Minimum values [min] represent worst case allowable in TrueNet system.
Minimum TrueNet values are derived from and meet or exceed TIA/EIA Category 5e values.
• Typical values [typical] were obtained from passive testing over a 100 meter channel in a UL certified laboratory
under controlled conditions.
• Category 5e channel and components guaranteed to meet or exceed TIA/EIA Category 5e standards.
Channel consisted of AirES
®
cable, AirES patch cords and K610 jacks.
Characteristic Impedance for Cable: 100Ω(±3Ω)@100 MHz
Channel Propagation Phase Delay: 490 ns
Channel Delay Skew: 22 ns
100 Meter Channel Passive Electrical Specifications
IEEE Input Specification Limits/100BASE-T
Spec Min. Max.
Positive Amplitude: 0.95V 1.05V
Negative Amplitude: .095V 1.05V
Amplitude Symmetry: 0.98% 1.02%
Rise Time: 3 ns 5 ns
Fall Time: 3 ns 5 ns
Rise Time/Fall Time Symmetry: 0 ns 0.5 ns
Jitter:
0%
14%

×