KM8 RJ45 Modular Products STP/UTP

KRONE
PremisNET

KM8 RJ45
Modular Products
STP/UTP
Features
n Transmission performance
exeeds Category 6
requierements
n Highest contact reliability
at all times due to KRONE
LSA- PLUS

contact
technology
n Cable Management
ensures Performance
n Meets all future
requierements
n Coloured coding according
to TIA/EIA 568 A/B
n Ease of installation due to
simultaneous termination
KRONE GmbH
Beeskowdamm 3-11
Germany-14167 Berlin
Phone +49 30 8453-1422
Fax +49 30 8453-1412
http:// www.krone.com

Electrical Data
Insulation resistance ≥ 500 Mohm (IEC 512-2-3a)
Dielectric strengh Contact/contact 1,0 KV
Contact/shielding 1,5 KV
Terminations
Typ. Termination resistance ≤ 20 MOhm (EN 60603-7)
Current carrying capacity ≥ 1A (EN 60905)
(DIN EN 60603-7)
Insertion cycles ≥ 750 (IEC 512-2-13b)
Mechanical Data
Shield connection patented 360° Shielding
Conductor diameter 0,5-0,6 mm (AWG 22-24)
Insulation diameter 1,05-1,6 mm
Re-terminations of ≥ 200
of LSA-PLUS contacts
Insertion/ pullout force 20 N (EN 60603-7)
Testing requirements
Testing requirements of connection technology according to
proposal ISO/IEC 11801 2
nd
Edition, ISO/IEC 603-7.
Environmental
Use in dry rooms according to environmental 3.1 according
to ETS 300 019-1-3
at ambient temperatures of +5° to +40°.
Performance of KM8 Jack UTP
Near End Crosstalk
Far End Crosstalk (FEXT)
Far End Crosstalk
Return Loss

Return Loss
Ordering Information
Pack Qty
Order Number
KM8 Patch Panel
Unshielded
KM8 RJ45 Modular Patch Panel UTP, 32 way 1 6690 1 440-32
KM8 RJ45 Modular Patch Panel UTP, 24 way 1 6690 1 440-24
KM8 RJ45 Modular Patch Panel UTP, 16 way 1 6690 1 440-16
Shielded
KM8 RJ45 Modular Patch Panel STP 24 way 1 6690 1 441-24
KM8 RJ45 Modular Patch Panel STP 16 way 1 6690 1 441-16
KM8 Wall Outlets
Unshielded
KM8 RJ45 Modular Wall Outlet UTP, 2 way, white 1 6690 1 570-51
KM8 RJ45 Modular Wall Outlet UTP, 2 way, ivory 1 6690 1 570-02
Shielded
KM8 RJ45 Modular Wall Outlet STP, 2 way, white 1 6690 1 571-51
KM8 RJ45 Modular Wall Outlet STP, 2 way, ivory 1 6690 1 571-02
KM8 Jacks
Unshielded
KM8 Modular Jack UTP, white 1 6830 1 800-01
KM8 Modular Jack UTP, ivory 1 6830 1 800-02
KM8 Modular Jack UTP, grey 1 6830 1 800-03
KM8 Modular Jack UTP, black 1 6830 1 800-04
Shielded
KM8 Modular Jack FTP/STP, white 1 6830 1 810-01
KM8 Modular Jack FTP/STP, ivory 1 6830 1 810-02
KM8 Modular Jack FTP/STP, grey 1 6830 1 810-03
KM8 Modular Jack FTP/STP, black 1 6830 1 810-04

97051/07.2001 – Subject to changes
20
30
40
50
60
70
80
90
100
110
120
1 10 100 1000
[MHz]
[dB]
Cat. 6 Requirements
Typical values 4-5 / 3-6
0
10
20
30
40
50
60
70
80
1 10 100 1000
[MHz]
[dB]
Cat. 6 Requirements

Typical values 4-5
20
30
40
50
60
70
80
90
100
110
120
1 10 100 1000
[MHz]
[dB]
Kat. 6 Requirements
Typical values 4-5 / 3-6