Tài liệu Fiber Optic Cable Ruggedized High-Density Cable docx

Fiber Optic Cable
Ruggedized High-Density Cable
SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC’s ruggedized high-density cables provide
factory standard guaranteed performance
specifications. They are 100% optically tested
and are offered with a variety of optical
performance levels
Features:
• 245/900 or 500/900 µm polyester buffer
• Flame retardant polyurethane jacket
• Extremely rugged
• Superior abrasion resistance
• Excellent performance at extreme
temperature
• Compatible with all industry standard
connectors
Applications:
• Military and tactical applications where
cables are abused
• Outdoor use where quick retrieval and
rough handling are necessary
• Electronic News Gathering environments
[ENG]
• Security applications
10/05 • 101461
Ruggedized High-Density Cables
Fiber Optic Cable
Ruggedized High-Density Cables
2

www.adc.com • +1-952-938-8080 • 1-800-366-3891
Environmental Characteristics:
Storage Temperature -55˚ to 85 ˚C (-67˚ to 185 ˚F)
Operating Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Installation Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Specifications
Mechanical Characteristics:
Test Procedure Units Results
Crush Resistance EIA-FOTP-41A N/cm 1200
Impact Resistance EIA-FOTP-25B # of impacts 500
Flexing (# of Cycles) EIA-FOTP-104A # of cycles 10,000
Maximum Pulling Load EIA-FOTP-33A N (lb) 2000 (450)
Maximum Operating Load EIA-FOTP-33A N (lb) 1000 (225)
Min Bend Radius @ Max Load EIA-FOTP-33A — 15 x Cable OD
Low Temperature Bend Test EIA-FOTP-37A C (F) Passed @ -40 (-40)
Flame Retardant Polyurethane
Outer Jacket
900 µm Polyester
Tight Buffer
Dielectric Central
Strength Member
Aramid Yarn
Strength Member
245 or 500 µm
Acrylate Coated Fiber
Simplex Cable
10/05 • 101461
Ruggedized High-Density Cables
Fiber Optic Cable
Ruggedized High-Density Cables

3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Construction Characteristics:
Strand Count Single Jacket mm (in) Dual Jacket mm (in)
4 fiber 9.3 (0.365) 13.0 (0.515)
6 fiber 10.4 (0.410) 13.0 (0.515)
8 fiber 12.7 (0.500) 15.7 (0.620)
12 fiber 16.3 (0.640) 18.9 (0.745)
18 fiber 16.3 (0.640) 18.9 (0.745)
24 fiber 18.0 (0.710) 21.3 (0.840)
Optical Performance:
Multimode
Fiber
Maximum
Attenuation
@ 850/1300 nm
Typical
Attenuation
@ 850/1300 nm
Minimum
Bandwidth
@ 850/1300 nm
Core
Diameter
(µm)
Clad
Diameter
(µm)
Coat
Diameter

(µm)
Numerical
Aperture
50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015
62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015
100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020
200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020
Singlemode
Fiber
@ 1310/1550 nm @ 1310/1550 nm
Mode Field Diameter (µm)
@ 1310 nm @ 1550 nm
1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
101461 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
*Replace
XXX
or
YYY
with Fiber Type below:
XXX = Fiber Type

050 = 50/125/500 µm Multimode
100 = 100/140/500 µm Multimode
200 = 200/230/500 µm Multimode
YYY = Fiber Type
010 = Singlemode
062 = 62.5/125/245 µm Multimode
Ordering Information
Fibers Standard Diameter Dual Jacket Diameter
Fiber Coating
Diameter (µm)
Catalog Number*
mm in mm in
6 5.9 0.235 8.4 0.330 500 0006RUGHDR
XXX
5.9 0.235 8.4 0.330 245 7006RUGHDR
YYY
8 7.1 0.280 9.6 0.380 500 0008RUGHDR
XXX
7.1 0.280 9.6 0.380 245 7008RUGHDR
YYY
12 7.9 0.310 10.4 0.410 500 0012RUGHDR
XXX
7.9 0.310 10.4 0.410 245 7012RUGHDR
YYY
18 7.9 0.310 10.4 0.410 500 0018RUGHDR
XXX
7.9 0.310 10.4 0.410 245 7018RUGHDR
YYY
24 9.4 0.370 11.9 0.470 500 0024RUGHDR
XXX

9.4 0.370 11.9 0.470 245 7024RUGHDR
YYY