Tài liệu Fiber Optic Cable Tactical Cables ppt

Fiber Optic Cable
Tactical Cables
SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC's tactical cables provide factory standard
guaranteed performance specifications. They
are 100% optically tested and are offered with
a variety of optical performance levels.
Features:
• 245/900 or 500/900 µm polyester buffer
• Flame retardant polyurethane jacket
• Survives repeated abuse, tangling and knots
in retrieval
• Superior abrasion resistance
• Excellent performance at extreme
temperature
• Compatible with all industry standard
connectors
Applications:
• Military and tactical applications where
cables are abused
• Outdoor use where quick retrieval and
rough handling are necessary
• Electronic News Gathering environments
[ENG]
• Security applications
10/05 • 101463
Tactical Cables
Fiber Optic Cable
Tactical Cables
2

www.adc.com • +1-952-938-8080 • 1-800-366-3891
Environmental Characteristics:
Storage Temperature -55˚ to 85 ˚C (-67˚ to 185 ˚F)
Operating Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Installation Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Specifications
2 Fiber Cable
Flame Retardant
Polyurethane Outer Jacket
900 µm Polyester
Tight Buffer
Aramid Yarn
Strength Member
245 or 500 µm
Acrylate Coated Fiber
Mechanical Characteristics:
Test Procedure Units Results
Crush Resistance EIA-FOTP-41A N/cm 2200
Impact Resistance EIA-FOTP-25B # of impacts 500
Flexing (# of Cycles) EIA-FOTP-104A # of cycles 10,000
Maximum Pulling Load EIA-FOTP-33A N (lb) 1,800 (405)
Maximum Operating Load EIA-FOTP-33A N (lb) 600 (135)
Maximum Vertical Rise EIA-FOTP-33A m (ft) 100 (328)
Min. Bend Radius @ Max Load EIA-FOTP-33A cm (in) 10 (3.9)
Knot Test EIA-FOTP-87B C( F) Passed @ -40 (-40)
Low Temperature Bend Test EIA-FOTP-37A C (F) Passed @ -40 (-40)
10/05 • 101463
Tactical Cables
Fiber Optic Cable
Tactical Cables

3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Construction Characteristics:
Strand Count Cable Diameter
mm in
2 Fibers 5.3 0.210
4 Fibers 5.3 0.210
Optical Performance:
Multimode
Fiber
Maximum
Attenuation
@ 850/1300 nm
Typical
Attenuation
@ 850/1300 nm
Minimum
Bandwidth
@ 850/1300 nm
Core
Diameter
(µm)
Clad
Diameter
(µm)
Coat
Diameter
(µm)
Numerical
Aperture

50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015
62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015
100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020
200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020
Singlemode
Fiber
@ 1310/1550 nm @ 1310/1550 nm
Mode Field Diameter (µm)
@ 1310 nm @ 1550 nm
1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
101463 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Ordering Information
Fibers Standard Diameter Catalog Number*
mm in
2 5.3 0.210 7002TAC02F
XXX
4 5.3 0.210 7004TAC04F
XXX
*Replace
XXX

with Fiber Type below:
XXX = Fiber Type
010 = Singlemode
050 = 50/125/500 µm Multimode
062 = 62.5/125/245 µm Multimode
100 = 100/140/500 µm Multimode
200 = 200/230/500 µm Multimode