Tài liệu Fiber Optic Cable Aerospace Cables ppt

Fiber Optic Cable
Aerospace Cables
SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Features:
• Extremely light weight
• Small outer diameter
• Stabilized ETFE Jacket
Applications:
• Airplane networks and aerospace controls
• Extreme temperature environments
• Non out-gassing requirements
ADC’s aerospace cables provide factory standard guaranteed performance specifications. They are
100% optically tested and are offered with a variety of optical performance levels.
10/05 • 101465
Aerospace Cables
Fiber Optic Cable
Aerospace Cables
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Environmental Characteristics:
Storage Temperature -40˚ to 85 ˚C (-40˚ to 185 ˚F)
Operating Temperature -40˚ to 70 ˚C (-40˚ to 158 ˚F)
Installation Temperature -20˚ to 70 ˚C (-4˚ to 158 ˚F)
Specifications
Mechanical Characteristics:
Test Procedure Units Results
Crush Resistance EIA-FOTP-41A N/cm 900
Impact Resistance EIA-FOTP-25B # of impacts 100
Flexing (# of Cycles) EIA-FOTP-104A # of cycles 1,000
Maximum Pulling Load EIA-FOTP-33A N (lb) 400 (90)

Maximum Operating Load EIA-FOTP-33A N (lb) 100 (22)
Maximum Vertical Rise EIA-FOTP-33A m (ft) 100 (328)
Min. Bend Radius @ Max Load EIA-FOTP-33A cm (in) 5 (2)
Simplex Fiber Cable
Modified ETFE Outer Jacket
900 µm PVDF or Polyester
Tight Buffer
Aramid Yarn Strength Member
245 µm or 500 µm Acrylate or
Silicone Coated Fiber
10/05 • 101465
Aerospace Cables
Fiber Optic Cable
Aerospace Cables
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Construction Characteristics:
Strand Count Cable Diameter
mm in
Simplex 2.4 0.095
Optical Performance:
Multimode
Fiber
Maximum
Attenuation
@ 850/1300 nm
Typical
Attenuation
@ 850/1300 nm
Minimum

Bandwidth
@ 850/1300 nm
Core
Diameter
(µm)
Clad
Diameter
(µm)
Coat
Diameter
(µm)
Numerical
Aperture
50/125 3.5/1.5 2.6/0.6 500/500 50 ± 3 125 ± 2 500 ± 25 0.200 ± 0.015
62.5/25 3.5/1.5 2.7/0.8 200/500 62.5 ± 3 125 ± 2 245 ± 10 0.275 ± 0.015
100/140 6.0/3.0 4.5/2.0 100/100 100 ± 3 140 ± 4 500 ± 25 0.290 ± 0.020
200/230 7.0/15.0 5.0/12 20/30 200 ± 5 230 ± 10 500 ± 30 0.39 ± 0.020
Singlemode
Fiber
@ 1310/1550 nm @ 1310/1550 nm
Mode Field Diameter (µm)
@ 1310 nm @ 1550 nm
1.0/1.0 0.35/0.25 9.2 ± 0.4 10.4 ± 0.8 125 ± 1 245 ± 10 0.14
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
101465 10/05 Original © 2005 ADC Telecommunications, Inc. All Rights Reserved

Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Ordering Information
Description Diameter Catalog Number*
mm in
Simplex
with Polyester Tight Buffer
2.95 0.116 0001BOESFH
XXX
24HYTB
Simplex
with PVDF Tight Buffer
2.95 0.116 9001BOESFH
XXX
24
*Replace
XXX
with Fiber Type below:
XXX = Fiber Type
010 = Singlemode
050 = 50/125/500 µm Multimode
062 = 62.5/125/245 µm Multimode
100 = 100/140/500 µm Multimode