Tài liệu 2 RU Fiber Management Tray (FMT) ppt

www.adc.com • +1-952-938-8080 • 1-800-366-3891
Spec Sheet
2 RU Fiber Management Tray (FMT)
with MPO Connectors
Active equipment manufacturers are increasingly building DWDM transceivers that use the
multifiber MPO connector. While the MPO provides a compact interface on the transceiver card,
most service providers require single-circuit access. This creates the need for a conversion from
the multifiber MPO to a single-fiber connector. ADC’s Fiber Management Tray (FMT) is a compact
two rack-unit termination panel that features industry-leading cable management and ADC’s
sliding adapter packs, thereby enabling safe single-circuit access. The FMT can also be configured
with high-quality MPO to LC breakout cables that provide the connectivity between the DWDM
transceiver and the FMT panel.
Features and Benefits:
Low-loss MPO to LC breakout cables enable test access points for each card, provide •
single-circuit access for moves, adds or changes and high-quality terminations induce
minimum insertion loss in circuit
Total front access termination drawer allows quick and easy connection between active •
equipment and fiber distribution frame line-up
Industry-leading cable management protects bend radius, provides clean and organized •
cable routing pathways and protects traffic-carrying fiber from physical damage
Sliding adapter packs grouped into counts of eight LC adapters allow access to each •
individual fiber from one card, eliminating the possibility of disturbing adjacent fibers
Panel provides a demarcation point for MPO•
Applications:
Designed to mount next to active equipment with MPO ports•
DWDM – Dense Wavelength Division Multiplexer•
ROADM – Reconfigurable Optical Add-Drop Multiplexer•
10/07•105382AE
RU Fiber Management Tray
2 RU Fiber Management Tray (FMT)
with MPO Connectors

2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Compliance: GR-63-CoreNEBSLevel3
Dimensions (H x W x D): 89mmx483/584mmx279mm
   (3.5"x19"/23"x11")
Color: Blackpanelwithputtywhitefaceplate
Weight: 10 lbs
Bend Radius with Drawer Cable Management Features: 1.5"
Fiber Count: 64or80
Cable Breakout length: 280mm(11")
Cable Length: 2m(78")
MPO Insertion Loss (1310 and 1550 nm): 0.5dBmaximum;0.2dBtypical
MPO Return Loss (1310 and 1550 nm): -65dBminimum
LC Insertion Loss (1310 and 1550 nm): 0.3dBmaximum;0.1dBtypical
LC Return Loss (1310 and 1550 nm): -55dBminimum
MPO Gender: Female
MPO Connectors: 8-fiberAngledPhysicalContact(APC)
LC Connectors: Singlemode Ultra Physical Contact (UPC)
Specifications
Sliding Adapter Pack
with LC Adapters
(Enables Single-Circuit Access)
Fiber Management Tray
8-Fiber MPO
to LC Cable
Assembly
MPO
Transceiver
Port
To Network

From
Network
LC Patch Cord
LC Patch Cord
Tx
Rx
Tx
Rx
Tx
Rx
Tx
Rx
Tx
Rx
MUXDMUX
Transmitter
Receiver
Add/Drop
Module
FMT 2 RU Empty Panel
305mm
(12")
483/584mm
(19/23")
89mm
(3.5")
10/07•105382AE
RU Fiber Management Tray
2 RU Fiber Management Tray (FMT)
with MPO Connectors

3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Description Catalog Number
2 RU Termination Panel with MPO Connectors
64-positionpanelloadedwithMPOtoLC/UPCassemblies
(8-fiberfemaleAPCMPOto64-LCterminations)
FMT-GM7B808F0-A64P
80-positionpanelloadedwithMPOtoLC/UPCassemblies
(8-fiberfemaleAPCMPOto80-LCterminations)
FMT-GM7B808F0-A80P
2 RU Termination Panel with Adapters-Only
64-positionpanelloadedwithLC/UPCadapters FMT-GM7B80A00-A64P
80-positionpanelloadedwithLC/UPCadapters FMT-GM7B80A00-A80P
Cable Assembly
MPOtoLC/UPCcableassembly(8-fiberfemaleAPCMPO);2meterslong MRE-AF/OKBA1.7M11
Ordering Information
2 RU FMT with MPO Connectors
Spec Sheet
Website: www.adc.com
FromNorthAmerica,CallTollFree:1-800-366-3891•OutsideofNorthAmerica:+1-952-938-8080
Fax:+1-952-917-3237•ForalistingofADC’sglobalsalesofficelocations,pleaserefertoourwebsite.
ADCTelecommunications,Inc.,P.O.Box1101,Minneapolis,MinnesotaUSA55440-1101
Specificationspublishedherearecurrentasofthedateofpublicationofthisdocument.Becausewearecontinuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
containedhereinmaybecoveredbyoneormoreU.S.orforeignpatents.AnEqualOpportunityEmployer
105382AE 10/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved