Tài liệu LoopStar® 711 Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks doc

LoopStar
®
711
Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks
Carriers and enterprises are looking for inexpensive ways to utilize their infrastructures to take
advantage of the cost effectiveness of Ethernet transport and services. One area currently under
consideration is how to fully utilize fiber build-outs to continue to offer revenue-generating
services such as voice, and to add new packet-based services at the same time. The LoopStar 711
is a fixed configuration, multi-service access platform offering cost-effective and easy-to-manage
Ethernet and TDM-based services that allow for the full utilization of fiber networks.
The LoopStar 711 offers the complete suite of LoopStar 700 software, AC or DC power options,
patented T1/E1 circuit emulation, intelligent management and a mix of connectivity choices,
creating a multi-service access platform remarkably versatile for its price point.
The LoopStar 711 comes equipped with two 100Base-FX ports, four 10/100Base-T ports and two
T1/E1/J1 ports for circuit emulation services.
The LoopStar 711 is uniquely designed to offer fiber extension transport, as well as the services
that require this transport. Usually deployed at the customer premise, this product can create a
resilient infrastructure ideally suited for a variety of applications.
Applications
• Ethernet anywhere—extending Ethernet services to any size location
• Fiber extension—fully utilizing the maximum bandwidth of fiber cable plants
• Legacy services—providing carrier-class circuit emulation over a packet infrastructure
• MPLS to the edge—extending core services to any size location
SPEC SHEET SPEC SHEET
www.adc.com • +1-952-938-8080 • 1-800-366-3891
01/06 • 102160AE
LoopStar
®
711
LoopStar
®

711
Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Ethernet and Legacy Services for True Convergence
Providers of all sizes and types are worried about revenue cannibalization, losing revenues from one
type of service in order to add new services. With the LoopStar 711, providers can stop paying for a
separate T1/E1 service for voice transport and now carry these TDM services along with new services
such as Ethernet or Virtual Private LAN Service (VPLS) over a packet-based infrastructure to begin the
migration of their revenue streams.
Fiber Extension
With its two built-in 100Base-FX ports, the LoopStar 711 is the perfect multi-service solution for
providers looking to extend their footprints over fiber connections. This extension can now be used
to transport Ethernet traffic or circuit-emulated TDM traffic over the same uplinks.
The LoopStar 711 allows providers to leverage and extend their footprint by
delivering Ethernet and TDM-based services over existing fiber connections.
IP/MPLS Core
100FX
Edge
Switch
Central Office
Ethernet
T-1
Wireless
Backhaul
Ethernet
PSTN
Ethernet
Ethernet
PBX

T-1
T-1
T-1
100FX
100FX
100FX
LS
750
LS
711
LS
750
LS
711
LS
711
Specifications
Data Interfaces
• 4 x 10/100Base-T
• 4 x 10/100Base-T
• 2 x T1/E1/J1 for circuit emulation
• 2 x 100FX (SFP)
Management
•
CLI management interfaces
- RS-232
- 10/100
•
In-band or out-of-band
•

SNMP
•
FTP to download multiple software images and configurations
•
LoopStar 700 intelligent management
Ethernet Services
• 802.1d bridging
• 802.1p prioritization
• 802.1q VLAN tagging/stacking
• VLAN switching
• MPLS/VPLS
• 802.3ad Link Aggregation
• Rate-limiting per port or VLAN
- 1 Mb/s increments (1 to 100M)
- 50 Mb/s increments (100 to 1000M)
• Protected Switching Ring (PSR) with 50 msec resiliency
• Spanning Tree Protocol
Circuit Emulation Services
• Framed or unframed mode
• Fixed or Adaptive Jitter Buffer
• Adaptive, BITS, Loop or Internal (Stratum 4) timing modes
• Round-trip and one-way delay measurements
• Local and remote loopbacks
• ANSI t1.231 reports
Physical
• 2.2” high x 17” wide x 9” deep
• 0° to 50° C (operating)
• External AC or DC power
• ETSI 300-119-3
• FCC Part 15 – Class A

• 60950, EN 60950
• EN 55022 – Class A
• CE Mark
01/06 • 102160AE
LoopStar
®
711
LoopStar
®
711
Leveraging a Full Suite of Ethernet and TDM Services to Cost-Effectively Utilize Fiber Networks
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you
may verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications,
Inc. views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or
features contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102160AE 01/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
SPEC SHEET
Ordering Information
Description Catalog Number
LPS-711 AC Package (2T1/E1, 4 10/100BT, 2FX, no optics)
*Includes: 1 AC power supply and AC power cord, blanking plate, LPS-711-AC L1
19” and 23” rack mount brackets, console cable,
license for basic software and documentation

LPS-711-48VDC Package (2T1/E1, 4 10/100BT, 2FX, no optics)
*Includes: 1-48VDC power supply (OPM4812), LPS-711-48DC L1
19” and 23” rack mount brackets, console cable,
license for basic software and documentation