Tài liệu Pro Patch™ Programmable Series High-Density Bantam Patching System ppt

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
SPEC SHEET
Pro Patch
™
Programmable Series
High-Density Bantam Patching System
The new Pro Patch
™
Programmable bantam modular system offers unprecedented reliability and
flexibility in a convenient, space-saving size and lightweight package. Specifically engineered
for every day use in demanding mobile trucks, the Pro Patch Programmable system is the only
product in its class that passes stringent MIL-STD-202F standards for vibration and environmental
requirements.
The Pro Patch Programmable system is a WECO-standard bantam module in a high-density
(2 x 48) one- rack space panel. The modular design allows individual front jack access for circuit
and ground configurations without having to take the entire panel off-line or removing it from
the rack. Each modular bantam jack features gold crossbar contacts that provide self-cleaning
action and maximize reliability. Jack modules are also individually sealed which prevents dust and
contamination of the jacks from convection plenum action common in rack-mounted systems.
The Pro Patch Programmable series is available in several termination options including EDAC/ELCO
3-pin, 56-pin, 90-pin and AMP “champ” 50-pin connectors in both an eight-connector version
for audio and a four-connector version for RTS/Clear-Comtype intercom systems. Only five inches
deep and 6.2 pounds fully configured, the Pro Patch Programmable series is unmatched in the
marketplace.
Using ADC’s patent-pending escutcheon kit, the one rack unit panel can be converted to a 1.5
rack unit configuration. This allows the use of ADC’s ultra-large designation strips, providing room
for three lines of text – the largest designation on the market, reducing the number of strips used
and saving valuable installation time.
With the introduction of the new Pro Patch high-density series, ADC continues to bring you the
best performing, highest quality audio patching products in the broadcast market.
4 / 0 6 • 1 0 2 7 1 9 A E

Pro Patch
™
High-Density Bantam Patching System
Pro Patch
™
Programmable Series
High-Density Bantam Patching System
2
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Features
• Industry’s only bantam audio panel fully qualified to meet demanding military standards

(MIL-STD 202F) for ruggedness, and MIL-J-641E for jack compliance
• High-density 2x48 WECO-compliant bantam jacks on 0.312-inch centers
• DIP switch selectable circuit normals and grounds
• Ultra-shallow five-inch depth
• Fully AES/EBU 110 Ohm digital and analog compliant
• Lightweight panels weigh only 6.2 pounds
• Modular design allows individual jack access/configuration without affecting other circuits
• Grounds can be configured on an individual circuit basis for lift, chassis, sleeve, and

common ground
• Modules snap into place, tabs lock into chassis
• Circuit status icons allow users to identify circuit status with colored snap-in icons in

eight colors
• Designation strips cover tabs to prevent unauthorized access to circuit configuration switches
• Converts to a 1.5 rack unit panel with a patent-pending escutcheon kit
• Largest designations on the market, 0.410-inch top and bottom for 1 rack unit, 0.680-inch top
and bottom for 1.5 rack unit

• New 1.4-inch straddle designation strip kit uses one strip for two panels, cutting designation
strip labor in half
EDAC 90-pin Chassis (Front View)
EDAC 90-pin Chassis with 1.5 Designation Strips
EDAC 90-pin Chassis (Rear View)
EDAC 56-pin Chassis (Rear View)
EDAC 3-pin Chassis (Rear View)
4 / 0 6 • 1 0 2 7 1 9 A E
Pro Patch
™
High-Density Bantam Patching System
Pro Patch
™
Programmable Series
High-Density Bantam Patching System
3
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
3.300
1.180
.295
J1
J2
Circuit Status
icon identifier with
3 colors included
(8 colors available)
2
Bantam Jack Cord
Individual Jack Access
Each Pro Patch

®
Progr
ammable bantam panel
features 48 individual bantam jack cards. Cards
contain an individual circuit pair of jacks, front
panel circuit status snap-in icon, and seven-
position sealed DIP switch for normals and
grounds configuration. The gold-plated header
card plugs and sockets contained in the chassis
ensure maximum reliability.
To remove a jack, first remove the top and
bottom designation strips, push down the
locking tab on the jack module and slide the
module out from the front of the chassis. It is
not necessary to remove the entire panel from the
rack, or the cover from the chassis. Unauthorized
circuit changes are eliminated because switches
are hidden from front panel view.
The Pro Patch Programmable bantam system
is the only product in its class that passes
demanding MIL-202 environmental testing
for thermal shock, resistance from moisture
contamination, plating corrosion from salt fog,
and vibration to simulate long-term over-the-
road use.
1
5
7
2
4

6
8
3
T
R
S
SB
T
R
S
ISO
GND
8 PIN CARD EDGE CONNECTOR
REAR CHASSIS
50 PIN CONNECTOR
REAR CHASSIS
REFERENCE CHASSIS SCHEMATIC
(TYPICAL 48 POSITION)
25-PIN Receptacle (8)
1 RU 48-Position Bantam/AMP 50-pin Audio Panel (Rear View)
1
5
7
2
4
6
8
3
T
R

S
SB
T
R
S
ISO
GND
8 PIN CARD EDGE CONNECTOR
REAR CHASSIS
50 PIN CONNECTOR
REAR CHASSIS
REFERENCE CHASSIS SCHEMATIC
(TYPICAL 48 POSITION)
25-PIN Receptacle (4)
1 RU 48-Position Bantam/AMP 50-pin Intercom Panel, with bussed grounds (Rear View)
Pro Patch Programmable bantam panel allows
individual front-panel jack access for normals and
grounds without having to take the entire panel
off-line. Special 7-position DIP switches allows
configuration of the circuit normal and grounds
without cumbersome jumpers or pins to lose.
(See-through cover in photo is for demonstration
purposes only.)
SPEC SHEET
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may

verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102719AE 4/06 Revision © 2004, 2006 ADC Telecommunications, Inc. All Rights Reserved
Description Ordering Number
Preconfigured Systems
1RU 2x48
EDAC 90-pin, half-normalled PP1248-E90-HN
EDAC 3-pin, half-normalled PP1248-E3-HN
EDAC 56-pin, half-normalled PP1248-E56-HN
EDAC 90-pin, normals strapped PP1248-E90-NS
EDAC 3-pin, normals strapped PP1248-E3-NS
EDAC 56-pin, normals strapped PP1248-E56-NS
EDAC 90-pin, half-normalled, with connector kits PP1248-E90-HN-S
EDAC 3-pin, half-normalled, with connector kits PP1248-E3-HN-S
EDAC 56-pin, half-normalled, with connector kits PP1248-E56-HN-S
EDAC 90-pin, normals strapped, with connector kits PP1248-E90-NS-S
EDAC 3-pin, normals strapped, with connector kits PP1248-E3-NS-S
EDAC 56-pin, normals strapped, with connector kits PP1248-E56-NS-S
AMP 50-pin audio, half-normalled PPP1248-A50-HN
AMP 50-pin audio, normals strapped PPP1248-A50-NS
AMP 50-pin intercom, half-normalled, bussed ground PPP1248-ICA50-HN
AMP 50-pin intercom, normals strapped, bussed ground PPP1248-ICA50-NS
Accessories
1RU bantam audio module AM1-BAN
Designation kits
.440" VP-DES-440
.680" VP-DES-680-B
.1500" VP-DES-1500-B
1.5 RU chassis conversion kit PPP-15-CHAS-KIT

O r d e r i n g I n f o r m a t i o n
PPP1248-E90-NS AM1-BAN
PPP1248-E90 PPP-15-CHAS-KIT