Tài liệu Soneplex® Quad Loop Extender Four-Position Remote Chassis docx

www.adc.com • +1-952-938-8080 • 1-800-366-3891
SPEC SHEET
Soneplex
®
Quad Loop Extender
Four-Position Remote Chassis
The Soneplex Quad Loop Extender (QLX) Four-Position Remote Chassis is part of ADC’s cost-
effective solution for T1-based service delivery. The Soneplex platform supports DS1 network
interfaces on either copper or fiber using HDSL, HDSL2, HDSL4, traditional T1 repeater or optical
DS2 technology in a single platform. Integrated network management lets carriers save on overall
operations costs through the entire system lifecycle.
The QLX Four-Position Remote Chassis is installed at the customer premises for termination of
up to eight protected or unprotected DS1 circuits via two or four optical DS2 circuits. The unit
houses up to four QLX modules, an optional line termination unit, alarm processor unit and craft
performance monitoring module. Two QLX modules are deployed for unprotected applications;
four QLX modules are used for 1+1 protection. The Four-Position Remote Chassis is modular
and includes two fiber storage areas, eight DS1 terminations with choice of RJ48 or wire-wrap
connectors and terminations for power and alarms. The chassis is designed to be wall-mounted,
however, an optional rack mount bracket is available.
Features:
• Supports two protected or unprotected optical DS2 circuits for up to eight DS1s
• Remote alarm capability for major, minor, critical and eight housekeeping alarms
• Local craft interface for remote access to performance monitoring information
• Optional line termination unit provides DSX-1 access for local testing
• Modular wall mount chassis with optional 23” rack mount bracket
• Operates on –48 VDC
5/06 • 102738AE
Soneplex Quad Loop Extender
Soneplex
®
Quad Loop Extender

Four-Position Remote Chassis
2
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Specifications:
Dimensions (HxWxD): 8” x 10.5” x 12” (20.32 x 26.7 x 30.5 cm)
Weight: 13 lbs (6 kg)
Operating Temperature: -40 F to 149 F (-40 C to 65 C)
Operating Humidity: 10% to 95% relative humidity, non-condensing
Mounting: Wall mount with optional 23” rack mount bracket
Modules per Chassis: 2 QLX modules unprotected; 4 QLX modules protected
DS1 Capacity: 8 RJ48 or wire-wrap connectors
Input Power: -48 VDC
The Line Terminating Unit (LTU) provides DSX jack access to both the eight
DS1 lines from the customer premises equipment and the eight DS1 lines
from the network. The LTU provides loopback testing, system maintenance
and intrusive DS1 testing. A non-intrusive monitor jack is also accessible for
monitoring and remote DS1 configuration.
Specifications:
Dimensions (HxWxD): 8” x 6.5” x 11.5” (20.3 x 16.5 x 29.2 cm)
Weight: 8.5 lbs (3.9 kg)
QLX Interface: DS1 IN, DS1 OUT and MON (20 dB below signal level
of the OUT jack)
CPE Interface: DS1 IN, DS1 OUT and MON (20 dB below signal level
of the OUT jack)
The Alarm Processor Unit (APU) provides audible and visual critical, major and
minor alarm indications and relay contacts for the QLX Four-Position Remote
Chassis. Communicating with the craft performance monitoring module,
the APU provides local alarm reporting and up to eight housekeeping alarms.
The alarm cut-off (ACO) switch and LED indicators are found on the front
panel of the APU.

Specifications:
Dimensions (HxWxD): 4.875” x .6875” x 9.75” (12.38 x 1.75 x 24.76 cm)
Weight: .56 lbs (.25 kg)
Power Consumption: 7.5 watts maximum
Alarm Types: Critical, major, minor and housekeeping
Line Terminating
Unit
Alarm Processor
Unit
QLX Four-Position
Remote Chassis
5/06 • 102738AE
Soneplex Quad Loop Extender
Soneplex
®
Quad Loop Extender
Four-Position Remote Chassis
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
The craft performance monitoring module (CPM) provides DS1 line
monitoring and a local craft interface to the QLX Four-Position Remote
Chassis for alarm reporting, status display, provisioning and system
maintenance. The CPM module is required for DS1 path protection
configuration.
Specifications:
Dimensions (HxWxD): 4.385” x .9.155” (11.1 x 23.3 cm)
Weight: .56 lbs (.25 kg)
Input Voltage: -42.5 to –56.5 VDC; -48 VDC nominal
Power Consumption: 5 watts maximum
Craft Interface: DB25 D sub-miniature; EIA 232, craft port only

Description Ordering Number
Soneplex QLX Four-Position Remote Chassis with RJ48 connectors FWM-QLXRJ4B
Soneplex QLX Four-Position Remote Chassis with wire-wrap connectors FWM-QLXWW4B
Alarm Processor Unit SPX-APU0B1
Craft Performance Monitoring Module FWM-QLXCPM0A1
Line Terminating Unit FWM-QLXLTU
23" Rack Mount Bracket for Four-Position Chassis QLX-HDW001
Battery Backup System (12.5 amp hours, UL 94-V.0) FLC-AC/BB2
Ordering Information
Craft Performance
Monitoring Module
SPEC SHEET
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
102738AE 5/06 Revision © 1997, 2006 ADC Telecommunications, Inc. All Rights Reserved