KRONE Fiber Optics Phone: 802.442.5411 Web: www.kroneamericas.com
Indoor/Outdoor Cables
Tight-Buffered, Low-Smoke,
Zero-Halogen Jacketed
(UL) Listed OFNR/OFCR
Product Features
■
Available in single-mode as well as 50
and 62.5 µm multimode versions
■
Excellent crush, cut and abrasion resistance
■
Available with 4–24 fibers
■
Excellent flame retardancy
(UL Listed OFNR/OFCR)
■
UV stable jacket
■
Flexible design/easy to install
■
Color-coded buffered fibers
■
All cables tested to EIA/TIA FOTP standards
Benefits
■
Saves time, labor; ideal for
direct connectorization.
■
Pull and terminate; no need to splice
at building entrance.
■
Ideal for installation in conduits
between buildings (non-armored)
■
Offers a convenient alternative
to PVC riser cables
■
Armored version available for
rodent resistance
Mechanical & Environmental Characteristics
4–12 Fibers 18–24 Fibers
Crush Resistance (EIA-FOTP-41A): 1500 N/cm 1500 N/cm
Impact Resistance (EIA-FOTP-25A): 1000 impacts 1000 impacts
Flexing (EIA-FOTP-104A): 1000 cycles 1000 cycles
Maximum Pulling Load (EIA-FOTP-33A): 1000 Newtons 1800 Newtons
(224 lbs.) (403 lbs.)
Maximum Safe Operating Load: 600 Newtons 1000 Newtons
(134 lbs.) (224 lbs.)
Minimum Bend Radius:
At Max. Load: 20 x cable O.D. 20 x cable O.D.
Unloaded: 10 x cable O.D. 10 x cable O.D.
Maximum Vertical Rise: 325 meters 325 meters
Fiber Proof Test: 100 KPSI 100 KPSI
Operating Temperature: -40°C to +70°C -40°C to +70°C
Storage Temperature (non-flexing): -40°C to +70°C -40°C to +70°C
Installation Temperature: 0°C to +70°C 0°C to +70°C
TECHNICALDATA
50/125 Multimode 3.5/1.5
▲
2.6/0.6
▲
400/400
▲
50 ± 3 125 ± 2 0.200 ± 0.015
62.5/125 FDDI Multimode 3.5/1.5
▲
2.7/0.75
▲
160/500
▲
62.5 ± 3 125 ± 2 0.275 ± 0.015
62.5/125 Gigabit Multimode 3.5/1.5
▲
2.7/0.75
▲
200/500
▲
62.5 ± 3 125 ± 2 0.275 ± 0.015
100/140 Multimode 6.0/3.0
▲
4.5/2.0
▲
100/100
▲
100 + 3 140 + 4 0.290 ± 0.020
Single-mode 1.0/1.0
■
0.35/0.35
■
Mode Field 9.3 ± 0.5 125 ± 2.0 0.13
(SMF-28) Diameter @1300nm
Optical Specifications
Max. Typical
Guaranteed Core Clad
Attenuation Attenuation Minimum Diameter Diameter Numerical
Fiber Type (dB/km) (dB/km) Bandwidth (Microns) (Microns) Aperture
▲
Attenuation and Bandwidth values for Multimode: 850nm/1300nm
■
Attenuation and Bandwidth values for Single-mode: 1310nm/1550nm
FiberOptic
CABLING SYSTEMS
KRONE Fiber Optics Phone: 802.442.5411 Web: www.kroneamericas.com
Cable and Jacket Specifications and Ordering Information
CABLE CABLE
CABLE NO. OF UL DIAMETER WEIGHT JACKET
PART Number TYPE FIBERS TYPE (inches) (mm) (Nom. lbs./km) TYPE
704LSZHIOCBX Distribution 4 OFNR (Riser) 0.235 6.0 90 Low Smoke Zero Halogen
706LSZHIOCBX Distribution 6 OFNR (Riser) 0.240 6.1 90 Low Smoke Zero Halogen
708LSZHIOCBX Distribution 8 OFNR (Riser) 0.280 7.1 125 Low Smoke Zero Halogen
712LSZHIOCBX Distribution 12 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
718LSZHIOCBX Distribution 18 OFNR (Riser) 0.325 8.3 170 Low Smoke Zero Halogen
724LSZHIOCBX Distribution 24 OFNR (Riser) 0.370 9.4 215 Low Smoke Zero Halogen
704LSZHIOBKX Breakout 4 OFNR (Riser) 0.365 9.3 200 Low Smoke Zero Halogen
706LSZHIOBKX Breakout 6 OFNR (Riser) 0.450 11.4 310 Low Smoke Zero Halogen
708LSZHIOBKX Breakout 8 OFNR (Riser) 0.500 12.7 380 Low Smoke Zero Halogen
712LSZHIOBKX Breakout 12 OFNR (Riser) 0.665 16.9 680 Low Smoke Zero Halogen
718LSZHIOBKX Breakout 18 OFNR (Riser) 0.640 16.3 600 Low Smoke Zero Halogen
724LSZHIOBKX Breakout 24 OFNR (Riser) 0.720 18.3 730 Low Smoke Zero Halogen
704LSZHARBKX Armored Breakout 4 OFCR (Riser) 0.650 16.5 825 Low Smoke Zero Halogen
706LSZHARBKX Armored Breakout 6 OFCR (Riser) 0.675 17.2 935 Low Smoke Zero Halogen
708LSZHARBKX Armored Breakout 8 OFCR (Riser) 0.785 19.9 1170 Low Smoke Zero Halogen
712LSZHARBKX Armored Breakout 12 OFCR (Riser) 0.850 21.6 1440 Low Smoke Zero Halogen
718LSZHARBKX Armored Breakout 18 OFCR (Riser) 0.850 21.6 1355 Low Smoke Zero Halogen
724LSZHARBKX Armored Breakout 24 OFCR (Riser) 0.990 25.2 1800 Low Smoke Zero Halogen
Indoor/Outdoor, Low Smoke Zero Halogen Cable
Effective date: 4/2000 Rev. 000. (File: 302-IN-ZC-XXX-1.6mm) Not a controlled document; subject to change without notice. Check with a factory representative before placing order.
KEVLAR is a registered trademark of the DuPont Co.
900 µm Tight Buffered Fiber
KEVLAR
®
Reinforcement
Central Member
Rip Cord
Low Smoke, Zero Halogen
Outer Jacket (UL) Listed OFNR
Binder (Above 12 Fiber)
Breakout Cable, 12-Fiber
Water-Swellable Core Wrap
Central Strength Member
Rip Cord
2.4 mm Sub-unit
KEVLAR
®
Strength Member
Outer Jacket (Low Smoke,
Zero Halogen/OFNR)
Armored Breakout Cable, 12-Fiber
Water-Swellable Core Wrap
Central Strength Member
Plastic Coated
Corrugated Steel Wrap
Rip Cords
Inner Jacket (Low Smoke,
Zero Halogen/OFCR)
Outer Jacket (Low Smoke,
Zero Halogen/OFCR)
2.4 mm Sub-unit
KEVLAR
®
Strength Member
TECHNICALDATA
X = Fiber type, substitute this symbol in part number for desired fiber type as follows:
10 = Single-mode; 50 = 50/125 G.I. Fiber; 62 = 62.5/125 G.I. FDDI Grade Fiber; 62G = 62.5/125 G.I. Gigabit Grade Fiber; LEAF = Corning LEAF™ Fiber.
Multimode riser and plenum cables are available in orange. Single-mode riser and plenum cables are available in yellow.
†
NR = Not Rated
FiberOptic
CABLING SYSTEMS