Tài liệu ATM (CLASICAL IP) pdf
Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (81.77 KB, 1 trang )
ATM (CLASICAL IP)
Key Commands Shows and Debugs
Interface atm 0
Ip address 10.1.1.1 255.255.255.0
Atm pvc 1 0 40 aal5snap
Atm pvc 2 0 50 aal5snap
Map-group atm-map
!
map-list atm-map
ip 10.1.1.2 atm-vc 1 BROADCAST
ip 10.1.1.3 atm-vc 2 BROADCAST
appletalk 10.2 atm-vc 5 BROADCAST
IPX 2C.1.1.1 atm-vc 10 BROADCAST
On 1010:
Int atm 1/0/0
Atm pvc 0 40 interface atm 1/1/1 0 140
Atm pvc 0 50 interface atm 2/2/0 0 160
Etc.
Show atm ilmi
Show interface atm 0. Use it to find the atm nsap
address of the remote mapped svc target
Show atm pvc
Show atm svc
Additional Commands
Svc:
Int atm 0
Ip address 10.1.1.1 255.255.255.0
Atm esi-address 11100000000.00
Atm pvc 1 0 5 qsaal
Atm pvc 2 0 16 ilmi
Map-group ccie
!
map-list ccie
ip 10.1.1.2 atm-nsap 47.009781000000003177775444.
222200000000.00 BROADCAST
ip 10.1.1.3 atm-nsap 47.009781000000003177775444.
333300000000.00 BROADCAST
Spot The Issue Notes
1 0 5 qsaal
1 0 16 ilmi
• Use subinterfaces whenever possible (or
allowed).
• Only does IP! If you want to do IPX or
Appletalk, must use LANE
