Bạn đang xem bản rút gọn của tài liệu. Xem và tải ngay bản đầy đủ của tài liệu tại đây (44.95 KB, 2 trang )
case study
Route Fiber Throughout
Manufacturing Facility
Type of Customer:
Large telecommunications manufacturer. This company recently built a new facility to house its
engineering group as well as its diverse manufacturing operation.
The Existing Network:
• Facility uses over 50,000 linear feet of fiber to carry vital information between its
distribution and manufacturing center.
• Such information - including equipment drawings, inventory totals, scheduling plans and
billing documents - is critical to all areas of the manufacturing center.
• Facility was built with its employees in mind - the center is open, bright and clean.
Requirements:
• Due to the facility’s large size - over 284,000 square feet - the method of transporting its
fiber must be efficient and timely.
• Fibers must be protected from damage and remain free of dirt and debris.
• Method of transporting fiber must be easily adaptable to the varied environments of the
manufacturing center. It will need to be installed around such obstacles as heating and
cooling pipes and extremely large pieces of machinery.
• Product must not take away from the facility’s attractive appearance.
ADC Solution:
ADC’s FiberGuide
®
system - a trough system designed to direct and protect fiber as it is routed from
one location to another - was used throughout the manufacturing center. This system has been used
successfully in countless central offices, but never before in a manufacturing environment. The
success of this latest application is a testament to the ADC FiberGuide system’s versatility and ease
of use.
ADC’s FiberGuide system successfully managed fiber throughout the customer’s manufacturing center:
• Fibers were carried efficiently throughout the facility on 5200 linear feet of ADC’s
FiberGuide system.