Tài liệu SONEPLEX BROADBAND SYSTEM ppt

S
ONEPLEX
®
B
ROADBAND
S
YSTEM
The Soneplex System
from ADC. The T1/E1
Service Delivery Experts
The Soneplex Broadband system is an efficient, cost-
effective solution for T1-based service delivery. It
supports DS3 or STS-1 network interfaces and up to
28 DS1 loop transport modules. Integrated network
management lets carriers save on overall operations
costs through the entire system lifecycle.
ADC’s Soneplex system is the lowest total cost
solution for carriers to grow their T1-based business
services. Focused on providing flexible, end-to-end
solutions, the Soneplex system saves carriers money
on T1-based services over copper or fiber, using
HDSL, HDSL2, traditional T1 repeater or optical DS2
technology, in a single platform. From operations,
maintenance, provisioning and high-speed backbone
connections to central office space and cabling, the Soneplex
system is designed to take costs out of today’s T1 delivery approach,
adding profit to your bottom line.
FEATURES
• Cost-effective DS3 or STS-1 network connection
• Delivers T1's over HDSL, HDSL2, T1 repeater, and optical DS2
• Supports TL1/X.25, TCP/IP, TBOS and SNMP protocols for flexible

alarm management and per-circuit visibility and provisioning
• Full carrier-class functionality and hardened design
• NEBS certified; completed the OSMINE process
26/99
460
Soneplex
®
Broadband System
Description
System Overview
Soneplex Broadband
Chassis
The Soneplex Broadband system is a flexible platform for the delivery of T1-based
services. It is ideal for a variety of DS1 distribution applications including point-to-
multipoint hubs, outside plant applications, building or campus service distribution, and
cellular transport-site feeds. The Soneplex Broadband system accepts either a DS3 or
STS-1 electrical SONET network interface – from a SONET multiplexer, digital cross-
connect system (DCS) or other network device – and distributes up to 28 DS1 signals
over copper or fiber facilities.
The Soneplex Broadband system provides a protected network interface to a DS3 signal
using two redundant DS3 Multiplexer (MUX) modules or a protected interface to a
SONET STS-1 signal with two redundant Electrical Carrier-1 modules (EC1M) and two
redundant Virtual Tributary Mapper modules (VTMM). One slot in the high-speed
section of the system is reserved for an optional Test Access Unit (TAU) or Remote Test
Access Unit (RTAU). Each system is also equipped with a Main Processor Unit (MPU) or
Shelf Controller Unit (SCU) and an Alarm Processor Unit (APU) for network manage-
ment of T1 services.
The Soneplex Broadband chassis accepts an electrical DS3 or STS-1 network input and
distributes up to 28 DS1 circuits over copper or fiber facilities to up to seven sites. Low-
speed DS1 modules can be mixed to accommodate existing facilities. The management

and maintenance section consists of an MPU or SCU and APU, and supports telemetry
byte oriented serial (TBOS), transaction language 1 (TL1) and simplified network
management protocol (SNMP) for remote connection to an operations support system
(OSS). It also provides a menu-driven craft interface, alarm contact closures, house-
keeping alarms, and an integrated X.25 PAD (packet assembler/disassembler).
Specifications
Dimensions (HxWxD):
Weight:
Mounting Options:
Common Modules:
DS1 Capacity:
Modules Supported:
Power Feeds:
10" x 21.5" x 12" (25.4 x 54.6 x 30.5 cm)
28 lbs. (12.75 kg)
23" WECO or EIA rack 2" or 5" recess
MPU or SCU and APU; DS3 MUX or EC1M/VTMM;
TAU or RTAU
28
HLXC (28); Unprotected ODS2 (7); Protected
ODS2 (14); RLX IOR (28); DLX (28); H2LXC (28)
-48 VDC A and B
RLX
3
CENTRAL OFFICE
HDSL
HDSL2
T1 REPEATER
OPTICAL
DS2

CUSTOMER PREMISES
DS3
STS-1
SONEPLEX
BROADBAND
SYSTEM
HLXR
CUSTOMER PREMISES
H2LXR
CUSTOMER PREMISES
NIU
CUSTOMER PREMISES
QLX
CORE
NETWORK
36/99
460
Soneplex
®
Broadband System
Main Processor Unit
The Main Processor Unit (MPU) provides extensive network management for system
configuration, remote provisioning, maintenance, circuit visibility and performance
monitoring. It collects and reports performance monitoring information to an OSS
via a TBOS or TL1/X.25 protocol for centralized management and system control.
The MPU contains FLASH memory for software upgrade capability.
Specifications
Dimensions (HxWxD): 4.88" x .69" x 9.75" (12.4 x 1.75 x 24.8 cm)
Weight: .53 lb. (.24 kg)
Power Consumption: 5.0 watts, maximum

The Shelf Controller Unit (SCU) provides extensive network management for
system configuration, remote provisioning and circuit visibility. The SCU adds
SNMP capability while supporting standard TL1 commands over TCP/IP.
Configuration data is stored on the module and may be uploaded or down-
loaded. Front panel access provides craft control and remote connections that
can be made through a modem network. An optional graphical user interface
(GUI) element management system is available for stand-alone operation for
integration into a network management system.
Specifications
Dimensions (HxWxD):
Weight:
Power Consumption:
Management Interfaces
Front Panel Craft Port:
Remote Access Port:
SNMP Access Port:
4.7" x .7" x 9.8" (12 x 1.7 x 24.8 cm)
.4 lb. (.2 kg)
5.0 watts, maximum
RS232C/DB9; ASCII to VT100 terminal
RS232C/DB25; ASCII or PPP
Ethernet/RJ45 or wire-wrap; SNMP
Shelf Controller Unit
The SCU Element Manager is a Java-based SNMP GUI. The Soneplex EMS
software operates on Windows NT
®
or Sun Solaris
™
based systems. The
Soneplex EMS can be used as a stand-alone application or can be integrated

with HP OpenView Network Node Manager software. The Soneplex SNMP EMS
reduces staff training and maintenance and test capabilities through an easy to
use point-and click graphical interface.
Specifications
PC:
Sun UNIX:
Pentium 100 MHz processor
Windows NT
®
Minimum release 4.0, 64 MB RAM
HP OpenView Network Node Manager for PC Windows NT
®
Minimum release 5.2
SPARC 5 Workstation
Sun Solaris
™
Minimum release 2.51, 128 MB RAM
HP OpenView Network Node Manager for Sun Solaris
™
Minimum release 5.01
SCU Element
Management System
Software
46/99
460
Soneplex
®
Broadband System
Alarm Processor Unit
The Alarm Processor Unit (APU) provides alarm reporting along with support

for up to eight housekeeping alarms. Critical, major, and minor alarms are
reported via front panel LEDs. Alarm cut-off can be activated for audible
alarms.
Specifications
Dimensions (HxWxD): 4.88" x .69" x 9.75" (12.4 x 1.75 x 24.8 cm)
Weight: .56 lb. (.25 kg)
Power Consumption: 7.5 watts, maximum
Alarm Outputs: Critical, major, minor and up to eight
housekeeping alarms
For an electrical DS3 interface to the network, a DS3 Multiplexer module (DS3
MUX) is required. One DS3 MUX module is used for unprotected applications,
two modules are deployed for 1+1 protection.
DS3 Interface Module
Specifications
Dimensions (HxWxD):
Weight:
Line Rate:
Line Code:
Line Impedence:
Format:
Power Consumption:
DS3 Input Level:
DS3 Transmit Power Level:
Maximum Span:
9.27" x .70" x 9.28" (23.55 x 1.78 x 23.57 cm)
1.146 lb. (.52 kg)
44.736 Mbps ± 20 ppm
B3ZS
75 Ω nominal (with splitter/combiner)
Bipolar, return to zero

8 watts, maximum
5.7 dBm to -7.3 dBm
-1.8 dBm to 5.7 dBm
450' to cross-connect facility
56/99
460
Soneplex
®
Broadband System
STS-1 Interface
Module and VT
Mapper Module
For an electrical STS-1 interface to the network, an Electrical Carrier-1 module
(EC1M) and a Virtual Tributary Mapper module (VTMM) are required. One EC1M
module and one VTMM are used for unprotected applications, two of each module are
deployed for 1+1 protection.
Specifications
VTMM Dimensions (HxWxD): 9.5" x 1.0" x 9.8" (24.13 x 2.54 x 24.89 cm)
VTMM Weight: 1.5 lbs (.68 kg)
EC1M Dimensions: 9.5" x 1.0" x 9.8" (24.13 x 2.54 x 24.89 cm)
EC1M Weight: 1.0 lb (.45 kg)
Line Rate: 51.84 Mbps ±20pps
Line Code: B3ZS
Line Impedance: 75 Ω nominal
VTMM Power Consumption: 2.2 watts maximum
EC1M Power Consumption: 6.5 watts maximum
STS-1 Input Level: -8.2 dBm to +4.7 dBm
STS-1 Transmit Power Level: -2.7 to 4.7 dBm
Maximum Span: 450 ft to cross-connect facility
Soneplex Broadband Chassis

Connectorized Broadband Chassis
with two 64-pin Amphenol Connector
Main Processor Unit
Shelf Controller Unit
Alarm Processor Unit
DS3 Interface Module
STS-1 Interface Module
VTMM Mapper Module (required for STS-1 interface)
Heat Baffle/Cable Management Panel
Description
Catalog Number
SPX-FRM0A3
SPX-FRM0A3CT
SPX-MPU0522
SPX-SCU0A1
SPX-APU0B1
SPX-DS30C1
SPX-EC1M0A1
SPX-VTMM0A1
SPX-BAFF0A1
460 6/99 Revision © 1998, 1999 ADC Telecommunications, Inc. All Rights Reserved An Equal Opportunity Employer
Specifications published here are current as of the date of publication of this document. Because we are continuously improving our products,
ADC reserves the right to change specifications without prior notice. At any time, you may verify product specifications by contacting our
headquarters office in Minneapolis. ADC Telecommunications, Inc. views its patent portfolio as an important corporate asset and vigorously
enforces its patents. Products or features contained herein may be covered by one or more U.S. or foreign patents.
ADC Telecommunications, Inc.
P.O. Box 1101
Minneapolis, Minnesota 55440-1101
FAX: (612) 946-3292
From North America, Call Toll Free: 1-800-366-3891, Ext. 3223

Outside of North America: 612-938-8080
Home Page Address:
International Sales Offices:
United Kingdom +44-1189-879-200 • Brussels, Belgium +32-2-712-6500 • Dusseldorf, Germany +49-211-530-655-0 • Madrid, Spain
+34-91-361-01-68 • Johannesburg, South Africa +27-11-655-7082 • Moscow, Russia +7-095-333-5022 • Budapest, Hungary +36-1-319-7103
Paris, France +33-1-55-68-10-59 • North Sydney, Australia +61-2-9954-4803 • Singapore +65-225-8228• Canberra, Australia +61-26-206-2222
Shanghai, China +86-21-6375-8908 • Beijing, China +86-10-6418-1980 • Tokyo, Japan +81-3-5793-7570 • Seoul, Korea +82-2-333-8989
Malaysia +60-3-460-8686 • Bangkok, Thailand +66-2-9595199 • Sao Paulo, Brazil +55-11-3040-0666 • Mexico City, Mexico +52-5-658-9620
Caracus, Venezuela +58-2-286-1444 • Buenos Aires, Argentina +54-114-788-8700 • Miami Lakes, FL (Caribbean/Miami) +1-305-231-8742