Tài liệu Cisco Secure PIX Firewall Advanced Exam 9E0-111 - Version 6.0 pdf

21certify.com














Cisco:

Cisco® Secure PIX Firewall Advanced Exam (CSPFA®)


9E0-111



Version 6.0

Jun. 17th, 2003

9E0-111 2

21certify.com


Study Tips
This product will provide you questions and answers along with detailed explanations
carefully compiled and written by our experts. Try to understand the concepts behind
the questions instead of cramming the questions. Go through the entire document at
least twice so that you make sure that you are not missing anything.
Latest Version
We are constantly reviewing our products. New material is added and old material is
revised. Free updates are available for 365 days after the purchase. You should check
the products page on the www.21certify.com web site for an update 3-4 days before the
scheduled exam date.


Important Note:
Please Read Carefully

This 21certify Exam has been carefully written and compiled by 21certify Exams experts. It is
designed to help you learn the concepts behind the questions rather than be a strict memorization tool.
Repeated readings will increase your comprehension.

We continually add to and update our 21certify Exams with new questions, so check that you have the
latest version of this 21certify Exam right before you take your exam.

For security purposes, each PDF file is encrypted with a unique serial number associated with your
21certify Exams account information. In accordance with International Copyright Law, 21certify
Exams reserves the right to take legal action against you should we find copies of this PDF file has
been distributed to other parties.

Please tell us what you think of this 21certify Exam. We appreciate both positive and critical
comments as your feedback helps us improve future versions.

We thank you for buying our 21certify Exams and look forward to supplying you with all your
Certification training needs.

Good studying!

21certify Exams Technical and Support Team
9E0-111 3

21certify.com

Note:
Section A contains 100 questions. Section B contains 57
questions. Section C contains 170 questions. The total
numbers of questions is 327.
Section A

Q.1 You are the network security administrator for an enterprise network with a complex security policy.
Which PIX Firewall feature should you configure to minimize the number of ACLs needed to implement
your policy?
A. ASA
B. Packet capture
C. Turbo ACLs
D. IP helper
E. Object grouping
Answer: E
Q.2 IPSec works with which switching paths:
A. Process switching
B. Optimum switching
C. Fast switching
D. Flow switching
Answer: A
Q.3 Speaking of Security Association requirements, which of the following statements is true?
A. A set of SAs are needed, one per direction, per protected data pipe.
B. A set of SAa are needed, one per direction, per protocol, per protected data pipe.
C. A set of SAs are needed, one per protocol only.
D. A set of SAs are needed, per protocol, per protected data pipe.
Answer: B
9E0-111 4

21certify.com

Q.4 The graphic shows the output from the show failover command. This unit is active and the other unit is
Standby. For an unknown reason, the failover is triggered and this unit has become Standby. We enter the
command “show failover” again. What shall we see as the ip address of the [active-interface-inside]?
A. 172.29.1.2
B. 192.168.89.1

C. 0.0.0.0
D. 172.29.1.1
Answer: D
Q.5 Which of the following statements is not true regarding the DNS Guard?
A. If disabled, can be enabled by the command: fixed protocol dns 53
B. The default UDP time expires in two minutes.
C. Immediately tears down the UDP conduit on the PIX Firewall as soon as the DNS response is received.
D. Prevents against UDP session hijacking and denial of service attacks.
Answer: A
Q.6 In helping the user to choose the right IPSec transforms combinations, the following rules apply:
(Choose all that apply)
A. To provide authentication services for the transform set, include an AH transform.
B. For authentication services include an ESP authentication transform.
C. To provide data authentication for the data and the outer IP header, include an AH transform.
D. For data confidentiality include an ESP encryption transform.
E. ND5 is stronger than SHA.

Answer: A, B, C, D
Q.7 What is the command that enables IPSec traffic to bypass the check of conduit or access-group
command statements?
A. conduit permit ip any any all
B. access-list acl_out permit tcp any any all access-group acl_out interface outside
C. sysopt connection permit-ipsec
D. conduit permit tcp any any all
9E0-111 5

21certify.com

Answer: C
Q.8 All of the following statements are true, except:

A. Use nat command to let users on the respective interfaces start outbound connections. Associate the nat id
with the global-id in the global command.
B. An interface is always outside when compared to another interface that has a higher security level.
C. Use a single default route statement to the outside interface only.
Set the default route with the ip route command.

D. To permit access to servers on protected networks, use the static conduit commands.
E. Packets can not flow between interfaces that have the same security level.
Answer: C
Q.9 Which of the following statements are not true: (Choose all that apply)
A. DMZ interface can be considered an inside, or outside interface.
B. DMZ interface is always considered inside.
C. Traffic originating from the inside interface to the outside interface of the PIX Firewall will be allowed to
flow unless restricted by access lists.
D. Traffic originating from the outside interface to the inside interface of the PIX Firewall will be dropped
unless specifically allowed.
E. DMZ interface is always considered outside.
Answer: B, E
Q.10 Adaptive Security Algorithm (ASA) is the heart of the PIX Firewall. Choose the strict rules that ASA
follows: (Choose all that apply)
A. The highest security interface is the inside interface.
B. The highest security interface is the outside interface.
C. No outbound packet can exit the PIX Firewall without a connection and state.
D. No packet, regardless of its direction, can traverse the PIX Firewall without a
connection or state.

E. No inbound packet can enter the PIX Firewall without a connection and state.
Answer: A, D
9E0-111 6

21certify.com

Q.11 Which statements about the PIX Firewall in VoIP environments are true? (Choose two)
A. The PIX Firewall does not support the popular call setup protocol SIP because TCP can be used for call
setup.
B. The PIX Firewall allows SCCP signaling and media packets to traverse the PIX Firewall and
interoperate with H.323 terminals.
C. The PIX Firewall supports the Skinny Client Control Protocol, which allows you to place IP phones and
Call Manager on separate sides of the PIX Firewall.
D. Users behind the PIX Firewall can place outbound calls with IP phones because they use HTTP tunneling
to route packets through port 80, making them appear as web traffic.
Answer: B, C
Q.12 Your organization’s web traffic has come to a halt because your PIX Firewall is dropping all new
connection attempts. Why?
A. You are running a software version older than 5.2, and the embryonic threshold you set in the static
command was reached.
B. The shun feature of the PIX Firewall has taken effect because the embryonic threshold you set in the nat
command was reached.
C. The TCP Intercept feature of the PIX Firewall has taken affect because the embryonic threshold you set in
the static command was reached.
D. The intrusion detection feature of the PIX Firewall has taken effect because the embryonic
threshold you set in the conduit command was reached.
Answer: A
Q.13 Which tasks can be performed from the Access Rules tab? (Choose three)
A. Configure translation rules.
B. Configure Cisco Secure ACS.
C. Configure access rules.
D. Define Java and ActiveX filtering rules.
E. Configure command authorization.
F. Create service groups and apply them to ACLs.

Answer: C, D, F
Q.14 Where in PDM do you go to add, delete, or view global pools of addresses to be used by NAT?
A. Global Pools tab
B. System Properties tab
9E0-111 7

21certify.com

C. Manage Pools button on the Translation Rules tab
D. IP Address Pools button on the VPN tab
Answer: C
Q.15 Which step is optional when creating a crypto map on the PIX Firewall?
A. Create a crypto map entry identifying the crypto map with a unique crypto map name and sequence
number.
B. Specify which transform sets are allowed for this crypto map entry.
C. Specify a dynamic crypto map to act as a policy template where the missing
parameters are later dynamically configured to match a peer’s requirements.

D. Assign an ACL to the crypto map entry.
E. Specify the peer to which IPSec-protected traffic can be forwarded.
Answer: C
Q.16 Which type of downloadable ACLs are best when there are frequent requests for downloading a large
ACL?
A. Named ACLs
B. Unnamed ACLs
C. Dynamic ACLs
D. Static ACLs
Answer: A
Q.17 Why is the group tag in the aaa-server command important?
A. The aaa command references the group tag to know where to direct authentication, authorization, or

accounting traffic.
B. The group tag identifies which users require authorization to use certain services.
C. The group tag identifies which user groups must authenticate.
D. The group tag enables or disables user authentication services.
Answer: A
9E0-111 8

21certify.com

Q.18 You have already created an ACL named ACLIN to permit traffic from certain Internet hosts to the
web server on your DMZ. How do you make the ACL work for you? (Choose two)
A. Bind the ACL to the DMZ interface.
B. Bind the ACL to the inside interface.
C. Bind the ACL to the outside interface.
D. Create a static mapping for the DMZ server.
E. Create a static mapping for the web server.
F. Create a conduit mapping for the web server.
Answer: C, E
Q.19 Cicso PDM consists of five major configuration areas. Choose these areas.
A. Monitoring
B. Hosts or networks
C. Access rules
D. System properties
E. Preferences
F. Translation rules
Answer: A, B, C, D, F
Q.20 How does the PIX Firewall know where to get the addresses to use for any NAT configuration?
A. From the nat_id in the static command.
B. You can have only one global pool of addresses, so the PIX Firewall knows that NAT uses the addresses in
the global pool established by the global command.

C. From the nat_id in the nat command.
D. From the nat_id in the dhcp address command.
Answer: C
Q.21 What is the purpose of the access-group command?
A. Bind an ACL to an interface.
B. Create an object group.
C. Create and access group.
D. Unbind the acl_ID from the interface interface_name
9E0-111 9

21certify.com

Answer: A
Q.22 Which statements about security level 100 are true? (Choose two)
A. It is the lowest security level.
B. It is the highest security level.
C. It is the least-trusted security level.
D. By default it is designated for the inside interface of the PIX Firewall.
E. It is not currently a configurable security level.
It is reserved for future use.

F. By default, it is designated for the outside interface of the PIX Firewall.
Answer: B, D
Q.23 Which statements about the PIX Firewall’s DHCP capabilities are true? (Choose two)
A. It can be a DHCP server.
B. It cannot be a DHCP client.
C. You must remove a configured domain name.
D. It can be a DHCP server and client simultaneously.
E. It cannot pass configuration parameters it receives from another DHCP server to its own DHCP clients.
F. The PIX Firewall’s DHCP server can be configured to distribute the IP address of up to four DNS servers

to its clients.
Answer: A, D
Q.24 The LAN-based failover your configured does not work. Why? (Choose two)
A. You used a hub for failover operation.
B. You used a switch for failover operation.
C. You used a dedicated VLAN for failover operation.
D. You did not set a failover IP address.
E. You did not use a crossover Ethernet cable between the two PIX Firewalls.
F. You used a crossover Ethernet cable between the two PIX Firewalls.
Answer: D, F Explanation:
LAN-Based Failover It is recommended that you connect the Primary and Secondary PIXes with a dedicated
switch. Do not use crossover cables. In the diagram above, a Cisco Catalyst 3500 switch connects the Primary
and Secondary PIXes. The LAN failover and stateful failover links are in different VLANs, VLAN 10 and VLAN
20, respectively. The inside-router and outside-router are used only for the sake of testing connectivity.
9E0-111 10

21certify.com

Q.25 How are LAN-based failover and serial failover alike?
A. Both require that all configuration is performed on the primary PIX Firewall.
B. Both require the use of a special serial cable.
C. They are configured with the same command set.
D. Both require two dedicated interfaces: one for configuration replication and another for stateful failover
E. Both provide stateful failover.
Answer: E
Q.26 Choose the correct statements regarding ACLs & Conduits:
A. A conduit creates a rule on the PIX Firewall Adaptive Security Algorithm by denying connections from
one interface to access hosts on another.
B. An ACL applies to a single interface, affecting all traffic entering that interface
regardless of its security level.

C. An ACL applies to a single interface, affecting all traffic entering that interface based in its security level.
D. A conduit creates an exception to the PIX Firewall Adaptive Security Algorithm by permitting
connections from one interface to access hosts on another.
Answer: A
Q.27 What is the command to remove a group of previously defined object-group commands?
A. Both answers are correct.
B. clear object-group
C. Both answers are incorrect.
D. no object-group
Answer: A
Q.28 With the IKE disabled, which of the following statements are true on a router? (Choose all that apply)
A. The peer’s IPSec SA will never time out for a given IPSec session.
B. CA can not be used.
C. The command to disable IKE is: no crypto isakmp
D. The user must manually define all the IPSec security associations in the crypto maps at all peers.
Answer: A, B, D Explanation: Disabling IKE To disable IKE, you will have to make these concessions at the
peers:
9E0-111 11

21certify.com

You must manually specify all the IPSec security associations in the crypto maps at all peers.
IPSec security associations will never time out for a given IPSec session.
The encryption keys never change during IPSec sessions between peers.
Anti-replay services will not be available between the peers.
CA support cannot be used.
To disable IKE, use the following command:
no crypto isakmp enable interface-name
Q.29 This security protocol provides data confidentiality and protection with optional authentication and

replay-detection services.
A. What is ESP
B. What is DES
C. What is IKE
D. What is AH
E. What is RSA
Answer: A
Q.30 What is the command to enable a PIX Firewall to inspect port 554 for RTSP traffic?
A. fixup protocol rtsp 554
B. inspect rtsp 554
C. fixup rtsp 554
D. inspect protocol rtsp 554
Answer: A
Q.31 H.323 is more complicated than other traditional protocols because:
A. It requires a high amount of bandwidth.
B. It uses more than one TCP port.
C. It is sensitive to delays.
D. It requires client reconfiguration.
9E0-111 12

21certify.com

Answer: B
Q.32 Speaking of the translation table of a PIX Firewall, by default, if there is no translated packets for a
particular IP address, the entry times out and gets removes from the table. This timeout period is:
A. User- Configurable and by default is 5 minutes
B. User- Configurable and by default is 60 minutes.
C. User- Configurable and by default is 180 minutes.
D. not User- Configurable and by default is 5 minutes.
E. not User- Configurable and by default is 2 Minutes.

F. not User- Configurable and by default is 60 Minutes.
Answer: C
Q.33
Firewall operations are based on one of the following technologies: -Packet filtering -Proxy Server -Stateful
packet filtering
Which is the method used by PIX Firewall?
A. Packet Filtering
B. Stateful Packet Filtering
C. All answers are incorrect
D. Proxy server
Answer: B
Q.34 Which statements about intrusion detection in the PIX Firewall are true? (Choose two)
A. When a policy for a given signature class is created and applied to an interface, all supported
signatures of that class are monitored unless you disable them.
B. Only the signatures you enable will be monitored.
C. The PIX Firewall supports only inbound auditing.
D. IP audit policies must be applied to an interface with the ip audit interface command.
E. When a policy for a given signature class is created and applied to an interface, all supported
signatures of that class are monitored and cannot be disabled until you remove the policy from the
interface.
F. IP audit policies must be applied to an interface with the ip audit signature command.
Answer: A, D
9E0-111 13

21certify.com

Q.35 Why are packets inspected on the PIX Firewall?
A. For valid users.
B. For misconfiguration.
C. For incorrect address.

D. For malicious application misuse.
Answer: D
Q.36 What command reassigns a specific command to a different privilege level?
A. privilege
B. command auth
C. level-priv
D. curpriv
Answer: A
Q.37 Which command enables IKE on the outside interface?
A. ike enable outside
B. ipsec enable outside
C. isakmp enable outside
D. ike enable (outbound)

Answer: C
Q.38 Why use ESP security protocol rather than the AH security protocol when creating a VPN with IPSec?
A. ESP provides ant-replay and AH does not.
B. ESP provides data integrity and AH does not.
C. ESP provides data confidentiality and AH does not.
D. ESP provides data origin authentication and AH does not.
Answer: C
9E0-111 14

21certify.com

Q.39 You have configured the PIX Firewall and a AAA server for authentication. Telnet and FTP
authentication work normally, but HTTP authentication does not. Why?
A. You have not enabled HTTP, Telnet, and FTP authorization, which is required for HTTP
authentication.
B. You have not enabled HTTP authorization, which is required for HTTP authentication.

C. HTTP authentication is not supported.
D. Re-authentication maybe taking place with the web browser sending the cached username and
password back to the PIX Firewall.
Answer: D
Q.40 Which are functions of the object-group command? (Choose two)
A. Defines members of an object group.
B. Names an object group.
C. Enables sub-command mode.
D. Inserts an object group in an ACL.
E. Displays a list of the current configured object groups of the specified type.
F. Describes the object group.
Answer: B, C
Q.41 Why create Turbo ACL’s only on high-end PIX Firewall models, such as the PIX Firewall 525 or 535?
A. They are not supported in any of the low-end models, such as the 506.
B. Turbo ACLs require significant amounts of memory.
C. Turbo ACLs are processor-intensive.
D. Although turbo ACLs improve ACL search time with any PIX Firewall model, they are complicated and
rather difficult to configure. It is unlikely that environments using low-end models have personnel
properly trained to configure turbo ACLs
Answer: B
Q.42 When are duplicate objects allowed in object groups?
A. When they are due to the inclusion of group objects.
B. When a group object is included, which causes the group hierarchy to become circular.
C. Never
D. Always, because there are no conditions or restrictions.
9E0-111 15

21certify.com

Answer: A

Q.43 Which statement about the configuration mode for the PIX Firewall is true?
A. Privileged mode commands, unprivileged mode commands, and configuration mode commands all work
in configuration mode.
B. Only configuration mode commands work in configuration mode.
C. Unprivileged mode commands and configuration mode commands work in configuration mode, but
you must exit the configuration mode in order to execute privileged mode commands.
D. Privileged mode commands and configuration mode commands work in configuration mode, but you
must exit both these modes in order to execute unprivileged mode commands.
Answer: A
Q.44 Which statement about the PIX Firewall Syslog is true?
A. Syslog messages can be used to create log files, and can be displayed on the console of a designated Syslog
host, but they cannot be used to create e-mail alerts.
B. If all Syslog servers are offline, the PIX Firewall stores up to 100 messages in its memory and then
deletes the messages in its memory to make room for subsequent messages.
C. The PIX Firewall sends Syslog messages to document such events as denied TCP connections,
translation slot depletion, console logins and bytes transferred for each connection.
D. All Syslog messages are denied unless explicitly permitted.
Answer: C
Q.45 In the output of the show failover command, what does cable status waiting mean?
A. The active PIX Firewall is working and the standby PIX Firewall is ready.
B. Monitoring the other PIX Firewall’s network interface has not yet started.
C. The active PIX Firewall is waiting for configuration replication to be completed.
D. The primary PIX Firewall has finished testing the standby PIX Firewall’s interfaces and the standby
PIX Firewall is waiting to take control.
Answer: B
Q.46 Your new network administrator has recently modified your PIX Firewall’s configuration. You are
suddenly experiencing security breaches involving Internet mail. What change did the administrator make?
9E0-111 16

21certify.com

A. He disabled the PIX Firewall’s mailpor fixup.
B. He disabled the PIX Firewall’s smtp fixup.
C. He enabled the Pix Firewall’s ils fixup on port 25.
D. He defined the port on which to activate Mail Guard.
Answer: B
Q.47 What is the command that clears all IPSec security associations at the router?
A. clear crypto sa
B. clear isakmp
C. no crypto sa D. crypto sa disable
Answer: A Explanation:
clear [crypto] ipsec sa
or
clear [crypto] ipsec sa peer ip-address | peer-name
or
clear [crypto] ipsec sa map map-name
or
clear [crypto] ipsec sa entry destination-address protocol spi Clear IPSec
security associations.
Note Using the clear [crypto] ipsec sa command without parameters will clear out the full security association
database, which will clear out active security sessions. You may also specify the peer, map, or entry keywords to
clear out only a subset of the security association database. For more information, see the clear [crypto] ipsec sa
command within "Command Reference."
Q.48 You have configured your router with the following command:
crypto ipsec transform-set goodform ah-sha-hmac csp-des-csp-sha-hmac
A. The peer does not have to have a matching transform set.
Parameters will be dynamically negotiated.

B. The peer must also have the same transform set parameters specified.
C. The peer must also have the same transform set name specified.

D. The peer must also have the same transform set name and parameters specified.
9E0-111 17

21certify.com

Answer: B
Q.49 Which of the following statements are true regarding the sanity check of PIX Firewall’s failover
feature? (Choose all that apply)
A. Both PIX Firewalls exchange failover HELLO packets over failover cable every 15 seconds.
B. With Network Activity test, the PIX Firewall counts all received packets for up to 5 seconds. If no traffic is
received, the PIX is declared nonoperational and the standby takes over.
C. Both PIX Firewalls exchange failover HELLO packets over all network interfaces.
D. PIX Firewall performs a broadcast and checks the responses.
Answer: A, C, D
Q.50 What is the command that causes PIX Firewall to prompt user for username and password?
A. uauth
B. auth-prompt
C. aaa authentication
D. aaa new-model
Answer: C
Q.51 Which of the following statement is correct?
A. Installing an additional interface card on a PIX Firewall is as simple as adding a NIC to a PC, but you
must have a license for it from Cisco.
B. Installing an additional interface card on a PIX Firewall is as simple as adding a NIC to a PC.
Answer: A
Q.52 On a PIX Firewall, as a general rule:
A. There is no general rule. The software configuration decides which one is the outside and which one is the
inside interface.
B. Ethernet 0 is always the outside network connection and Ethernet 1 is always the inside network
connection.

C. Ethernet 0 is always the inside network connection and Ethernet 1 is always the outside network
connection.
9E0-111 18

21certify.com

D. There is no general rule.
The priority command applied to the interface decides which interface is the outside and which interface
is the inside.
Answer: B
Q.53 How does the PIX Firewall handle multimedia applications? (Choose two)
A. It supports multimedia only with NAT.
B. It supports multimedia only without NAT.
C. It supports multimedia with or without NAT.
D. Multimedia applications are not allowed because they pose a security risk.
E. It dynamically opens and closes UDP ports for secure multimedia connections.
F. It opens a large range of ports for these applications if you configure the PIX Firewall to support
multimedia.
Answer: C, E
Q.54 Which command sets the Telnet password to cisco?
A. enable telnet password cisco
B. telnet password cisco
C. password cisco
D. passwd cisco
Answer: D
Q.55 Which commands configure the PIX Firewall’s PPPoE client?
A. Only vpdn group, vpdn username, and ip address pppoe.
B. Only vpngroup and vpnusername.
C. Only vpdn group and interface pppoe.
D. Only vpngroup and ip address pppoe.

Answer: A Q.56 Which statement about AAA and the PIX Firewall is true?
A. Authorization is valid without authentication, but authentication is never valid without authorization.
B. Authorization is valid without authentication, and authentication is valid without authorization.
C. Authentication is valid without authorization, but authorization is never valid without authentication.
9E0-111 19

21certify.com

D. Authentication and authorization are never valid without accounting.
Answer: C

Q.57 Which three problems can ActiveX cause for network clients using the PIX Firewall?
(Choose three)

A. It can attack servers.
B. It can block HTML commands.
C. It can block HTML comments.
D. It can download Java applets.
E. It can cause workstations to fail.
F. It can introduce network security problems.
Answer: A, E, F
Q.58 Which statement about the PIX Firewall is true?
A. The PIX Firewall passes RIP updates between interfaces.
B. You cannot configure the PIX Firewall to learn routes dynamically from RIP version 1 or RIP version 2
broadcast.
C. The PIX Firewall uses the dynamically learned routes to forward traffic to the
appropriate destinations but does not propagate learned routes to other devices.

D. The PIX Firewall uses dynamically learned routes to forward traffic to the appropriate destinations, passes
RIP updates between its interfaces, and propagates learned routes to other devices.

Answer: C
Q.59 You primary PIX Firewall is currently the active unit in your failover topology. What will happen to
the current IP addresses on the primary PIX Firewall if it fails?
A. They become those of the standby PIX Firewall.
B. The ones on the primary PIX Firewall remain the same, but the current IP addresses of the secondary
become the virtual IP addresses you configured.
C. They are deleted.
D. The ones on both the primary and secondary PIX Firewalls are deleted and both assume the failover
IP addresses you configured.
9E0-111 20

21certify.com

Answer: A
Q.60 IPSec enables PIX Firewall VPN features. At what OSI layer does IPSec funtion?
A. 3 & 4
B. 7
C. 2
D. 3
E. 5
Answer: A Explanation:
IPSec Framework The IPSec framework is a set of open standards developed by the Internet Engineering Task
Force (IETF). This framework provides security services at Layer 3, the Network layer of the OSI model.
The IPSec framework provides these features:
Peer Authentication
Data Integrity
Data Origin Authentication
The IPSec framework facilitates these features using two types of tunnels:
Key Management Tunnels (also known as IKE tunnels)
Data Management Tunnels (also known as IPSec tunnels)

Both key management and data management tunnels comprise Security Associations.
Q.61 You existing IPSec network comprises of 6 peers. Due to company expansion, one more peer is added
to your network. As a key administrator, how many 2-part key configurations would you have to create?
A. 1
B. 6
C. 5
D. None
E. 2
Answer: B
9E0-111 21

21certify.com

Q.62 The hardware requirements of the Stateful Failover are: (Choose all that apply)
A. Two identical PIX Firewall units.
FIX 520 or later model is recommended by Cisco.

B. The LAN ports for Stateful Failover on both PIX Firewall units should be connected with a crossover
cable or through a hub or switch.
C. A failover cable with the correct terminals.
D. Dedicated 10BaseT Ethernet ports on both PIX Firewall units must be connected and fully functional in
full Duplex mode.
Answer: A, B, C
Q.63 Preparation to configure VPN support has several steps. The first two steps are: -plan for
IKE -plan for IPSec
The goal of these advance planning are:
A. To investigate whether the budget allocated for the project will suffice.
B. To minimize misconfiguration.
C. To locate and remove bottleneck before the production phase.
D. To evaluate IPSEC and IKE parameter for optimal security and performance.

Answer: B
Q.64 On a PIX Firewall, you want to see the IP addresses assigned to your inside, outside and DMZ
interfaces. What is the command you use?
A. show interface *
B. show controllers
C. show ip address
D. show interfaces
Answer: C
Q.65 In a recent survey conducted by the Computer Security Institute, what percent of the organizations
polled stated that their network security defenses had been breached?
A. 70 percent
B. 37 percent
C. 7 percent
D. 27 percent
9E0-111 22

21certify.com

Answer: A
Q.66 When do you have access to the interactive setup dialog that helps you perform initial configuration
required to use PDM?
A. Only when an unconfigured PIX Firewall starts up.
B. Each time your PIX Firewall reloads.
C. When you enter the startup command at the configuration prompt.
D. When an unconfigured PIX Firewall boots up or when you enter the setup command at the configuration
mode prompt.
Answer: D
Q.67 If you configure a VPN between a Cisco VPN Client and the PIX Firewall using pre-shared keys for
authentication, which should you do? (Choose two)
A. Use pre-shared keys for authentication.

B. Use digital certificates for authentication instead of pre-shared keys.
C. Do not use digital certificates for authentication.
D. Ensure that the password on the VPN client matches the vpngroup password on the PIX Firewall.
E. Ensure that the group name differs from the VPN group name on the PIX Firewall.
F. Ensure that the group name on the VPN Client matches the vpngroup name on the PIX Firewall.
Answer: D, F
Q.68 Which statement about the PIX Firewall and virtual HTTP is true?
A. The PIX Firewall enables web browsers to work correctly with its HTTP authentication. The PIX Firewall
redirects the web browser’s initial connection to an IP address, which resides on it, authenticates the user,
and the redirects the browser back to the URL the user originally requested.
B. The PIX Firewall supports virtual Telnet, but not virtual HTTP.
C. The PIX Firewall enables RADIUS authorization by redirecting the web browser’s initial connection to
an IP address which resides on a web server you specify, authorizing the user, and then redirecting the
browser back to the URL the user originally requested.
D. The PIX Firewall enables you to access URLs from its console.
Answer: A
9E0-111 23

21certify.com

Q.69 Which statement about object groups is true?
A. Duplicate objects are allowed in object groups unless they are due to the inclusion of group objects.
B. An object group cannot be a member of another object group.
C. An object group can be a member of another object group.
D. Duplicate objects are not allowed in object groups.
Answer: C
Q.70 Which object group types can be created in the PIX Firewall? (Choose three)
A. Icmp-type
B. Service
C. Server host

D. ACL out
E. DHCP
F. Protocol
Answer: A, B, F
Q.71 Why is the ASA important for the PIX Firewall? (Choose three)
A. It monitors return packets to assure validity.
B. It allows two-way connections on all systems.
C. It allows one-way connection with an explicit configuration on each internal system.
D. It allows one-way connection with an explicit configuration on each external system.
E. It allows one-way connection without an explicit configuration for each internal system.
F. It randomizes the TCP sequence number, which minimizes the risk of attack.
Answer: A, E, F
Q.72 Which statement about failover is true?
A. When configuring the PIX Firewall for failover, you must configure the primary and secondary PIX
Firewalls exactly the same.
B. Configuration can be modified on either the primary or secondary PIX Firewalls with the same result.
C. Configuration replication is automatic from the active PIX Firewall to the standby PIX Firewall.
D. The active PIX Firewall replicates only the failover configuration to the standby PIX Firewall.
Answer: C
9E0-111 24

21certify.com

Q.73 Cicso PDM supports:
A. Both answers are correct
B. VPN commands
C. IPSec commands
D. Both answers are incorrect
Answer: D
Q.74 This protocol allows two parties to establish a shared secret key over an insecure communication

channel.
A. What is DH
B. What is IPSec
C. What is ND5
D. What is RSA
E. What is IKE
Answer: A
Q.75 Which combination of the following commands prevents Java applets from being downloaded by an
inside system?
A. pix(config)#outbound 1 deny 0 0 eq jave pix(config)#apply (inside) 1 outgoing_src
B. pix(config)#outbound 1 deny 0.0.0.0 0.0.0.0 java pix(config)#apply (inside) 1
outgoing_src

C. pix(config)#outbound 1 deny 0.0.0.0 255.255.255.255 java pix(config)#apply (inside) 1 outgoing_src
D. pix(config)#outbound 1 deny java pix(config)#apply (inside) 1 outgoing_src
Answer: B
Q.76 Network security should be an on-going process built around the security policy of the organization.
This continuous process known as the Security Wheel comprises of the four steps: 1-secure 2-monitor 3-test
4-improve
Choose the correct statements: (Choose all that apply)
A. To make sure that your network security system works, you must test and validate it with a product such
as Cisco Secure Scanner.
B. Monitoring of the network should be done with a real-time intrusion detection device such as Cisco Secure
9E0-111 25

21certify.com

Intrusion Detection System.
C. To make sure that your network security system works, you must test and validate it with a product such
as Cisco Secure Intrusion Detection System.

D. Monitoring of the network should be done with a real-time intrusion detection device such as Cisco Secure
Scanner.
Answer: A, B
Q.77 What username and password establish an SSH connection to your PIX Firewall?
A. username pixfirewall, password aaapass
B. username pix, current enable password
C. username pixfirewall, password attack
D. username pix, current Telnet password
Answer: D
Q.78 What is the maximum number of transforms in a transform set?
A. 3
B. 6
C. 9
D. 10
Answer: A
Q.79 What PIX Firewall feature do you need when you have NIC-registered IP addresses on your inside
network that you want to be accessible on the outside network?
A. NAT
B. PAT
C. NAT+
D. PPPoE
Answer: C
Q.80 Which statement about installing the PIX-4FE and PIX-VPN-ACCEL cards in a PIX Firewall 535