Tài liệu Biến tần điều khiển của Omron doc

NP Series Programmable Terminal
Nguồn : hiendaihoa.com





* Ordering
information
* Specifications
* Configurations
* Dimensions,
and etc

can be found in our PDF

brochure.



Easy Setup with the Cost-
effective, Compact NP Series

What do you need in a NP Series?
Display visibility, information
capacity, cost effective? OMRON
provides all of these and goes further
to reduce the TCO, including
operating efficiency, by enabling
connection of various control devices,
easy design work, and the smoothest

possible connections.
NP Series Lineup
Operation Features

Transfer screens at high speed via USB port

The USB interface lets you take full advantage of the computer
software environment. Transfer screens created on the computer
to the NP Series at high speeds.




USB Memory Stick for program upload/download

Screen data can be transferred with a USB memory stick,
eliminating the need to carry a computer to the site.




Easier On-site Operation

Models with two different function key layouts are available to
meet the needs of your application design. The NP Series case is
also available in two different colors: black or silver.



Use the Same Equipment Worldwide with Multi-Language

support

The NP Series, screens, and Support Software are supported in
English, Chinese, many European languages, and Japanese. Also,
the NP Series meets international standards so it can be exported
or imported across country borders easily.




Hardware Features

Compact design reduces the mounting work

At 130.1 × 104.8mm (NP3:W × H), this NP Series is small enough
to be mounted in the same space as a handful of switches, and it
requires only one mounting hole in the control panel. You get less
work and a less crowded operating section.




Install in Most Environments

The front of the panel has IP65 water resistance,
allowing the NP Series to be used in environments where mist or
splashing cooling water is present.

Compact, Yet Plenty of Information

The same data shown on NP5 can also be reflected clearly on an
NP3, without compromising the display clarity. This proves to show

the advanced display capabilities of both NP series.



Connection Features

Reduce Connection Design and Onsite Work

For Easy Maintenance without a PC

The NP Series provides an OMRON CP1L/CP1H PLC Programming
Console function, which allows users to check their PLC program
and monitor/trigger inputs/outputs.




For Easy Development without programming

NP Series is able to connect to OMRON EJ1 Temperature
Controllers. The NP Series can be operated immediately using the
sample screens included with the NP-Designer (Support Software).

Reduced Wiring Work

The NP Series is equipped with both a RS-232 port and a
configurable RS-422A/485 port so you can connect to a PLC or
Temperature Controller with a single cable. You get reduced wiring

work and easier maintenance.




Multivendor is now available

Including OMRON and Mitsubishi, support is provided for PLCs
from major global manufacturers. The NP Series can be used with
your current PLC without redesigning the system. It doesn’t matter

if you use a different PLC manufacturer for each project.




Multivendor List:

Manufacturer Series
RS-
232C
RS-
422A
RS-

485
Omron
Host Link
○ ○

C/CPM/CQM PLC
Host Link
○ ○

CS/CJ/CP1/CV/CVM PLC
NT link (1: N) *
○ ○

NT link (1: 1)
○ ○

EJ1
○
Allen-Bradley
MicroLogix
○

SLC5
○

GE Fanuc 90 series SNP
○ ○

Keyence KV/KZ series
○

LG (LS)
Master-K120S/200S
○

Glofa GM6 CNET
○ ○

Master-K CNET
○ ○

XGT CNET
○ ○

Matsushita
Electric Works,
Ltd.
FP series
○

Mitsubishi Electric

Corporation
FX/FX2N CPU port
○

FX3U CPU port
○

FX series computer link

○

○
A series computer link
○

A2A/A2AS/A2USH
○

A1SH/A3N/A2ASH CPU
port
Q series CPU port
○

Q series computer link
○ ○

Modbus
984 RTU/ASCII (Master)


○
RTU/ASCII Hex Address
(Master)


○
RTU/ASCII nW and RTU
2W (Master)

○
RTU/ASCII (Slave)


○
Modicon
TSX Micro (Uni-Telway)
*
○

○
NEZA (Uni-Telway) *
○

○
TWIDO
○

Siemens
S 7200
○

○
S7-300 (there to be PC
adapter)
○

S7-300 (there is no PC
adapter,) *

○
NULL NULL driver
Communication
parameter is not
set

* Please refer to NP Host Connection Manual for details

Software Features

NP Designer



NP Designer is a new software dedicated for NP series models. It
has all the advanced features and user friendly interfaces to assist
users in programming their ideal screens. From basic
lamps/switches to advanced graphic controls, the NP Designer will
compliment user’s needs to further illustrate their views of actual
conditions at sites.




Software Simulation for easy troubleshooting

NP Designer is equipped with a TEST Mode which is like a
simulation to enable users the advantage of testing their program
without actually connecting to PLC/Host, it also serves as an

excellent troubleshooting tool.



Application Examples

Example of Applications that Provides Added Value to
Equipment

Example 1:




Example 2:





Example 3:




Example 4: