Tài liệu PowerWorx® Power Distribution Products Select Series™ Fuse Platform ppt

10/03 • 100571
600 mm Products
103
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Power Distribution Products
Select Series
™
Fuse Platform
Catalog Number
LED Configuration
Power on and fuse alarm LEDs
Fuse alarm LED only
P
F
Alarm Contact Connection
Wire-wrap
Screw-down barrier terminal strip
W
S
PWX-041 CR
Two-hole compression
lug (stud type)
Powering Input
C
Access
Standard (front and rear access)
R
Panel Color and Mounting
Putty white, EIA/WECO mounting

Putty white, ETSI mounting
P
W
S
Screw-down barrier terminal strip
Powering Output
A2 G4* 2 TPA, 4 GMT
A2 G5** 2 TPA, 5 GMT
A2 G1** 2 TPA, 10 GMT
A2 XX 2 TPA per bus
A4 G4* 4 TPA, 4 GMT
A4 G5** 4 TPA, 5 GMT
A4 G1** 4 TPA, 10 GMT
A4 XX 4 TPA per bus
K2 G4* 2 KLM/KTK, 4 GMT
K2 G5** 2 KLM/KTK, 5 GMT
K2 G1** 2 KLM/KTK, 10 GMT
K2 XX 2 KLM/KTK per bus
K3 G4* 3 KLM/KTK, 4 GMT
K3 G5** 3 KLM/KTK, 5 GMT
K3 G1** 3 KLM/KTK, 10 GMT
K3 XX 3 KLM/KTK per bus
K4 G4* 4 KLM/KTK, 4 GMT
K4 XX 4 KLM/KTK per bus
K5 XX 5 KLM/KTK per bus
M2 G4* 2 TPM, 4 GMT
M2 G5** 2 TPM, 5 GMT
M2 G1 2 TPM, 10 GMT
M2 XX 2 TPM per bus
M3 G4* 3 TPM, 4 GMT

M3 G5** 3 TPM, 5 GMT
M3 G1** 3 TPM, 10 GMT
M3 XX 3 TPM per bus
M4 G4* 4 TPM, 4 GMT
M4 XX 4 TPM per bus
M5 XX 5 TPM per bus
G1 XX** 10 GMT per bus
Fuse Configuration
Dual Input Power Configuration
Dual bus configuration
Single bus configuration
Y
N
S
* G4 configurations accept fuses rated up to 15 Amps.
** G1 and G5 configurations accept fuses up to 10 Amps.
In this combination, center to center spacing is 0.250".
Distance between barrier walls is 0.200" (3-48 screw post).
This applies only for the GMT terminal block.
Note: Other configurations are available upon request.
†
†
†


†
As data and telephony converge, network
elements with varying amperage requirements are
often mixed within the same bay. The Select
Series

™
fuse platform enables service providers to
fuse this equipment from one platform, in a single
rack unit, making the most of valuable space. Its
compact footprint and versatility are well-suited for
collocation applications where high-amperage
equipment such as routers, DSLAMs, and SONET
gear is installed with lower-amperage equipment.
Its patent-pending modular design enables service
providers to combine TPA, KTK/KLM, TPM or GMT
fuses within a single rack unit. Input power up to
100 Amps per bus with up to 50 Amps output
power per fuse position is available.
For complete specifications, please contact ADC.
10/03 • 100571
600 mm Products
104
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Power Distribution Products
Uninterrupted Power GMT Series
To ensure constant powering of fused network equipment, the Uninterrupted Power GMT Series features
two input power feeds. If power to one fails, the other serves as backup – taking on the load of the failed
circuit while maintaining its own load. Schottky-steering diodes ensure panel uptime until input power is
restored, while a patent-pending heat dissipation design ensures safety. The panel offers input power
up to 60 Amps per bus.
Catalog Number
GMT
Fuse Type

Fuse Configuration*
CHASSIS HEIGHT
STANDARD TOTAL FRONT ACCESS
Dual power feed, 10/10 position 1.75" (4.44 cm) 3.50" (8.89 cm)
G
Putty white
Black
Panel Color
P
B
D10
*Custom fuse panel configurations available with certain minimums
**EIA (Electronic Industries Association), WECO (Western Electric Company),
ETSI (European Telecommunications Standards Institute)
LED Configuration
Power on and fuse alarm
LEDs (per fuse holder)
P
Alarm Contact Connection
Wire-wrap
Screw-down barrier
terminal strip
W
S
PWX-011 G
Two-hole compression
lug (stud-type)
Set screw barrel connector
Powering Input
C

S
Mounting Option**
Screw-down barrier
terminal strip
Set screw barrel
terminal strip
Powering Output
S
B
Access
Standard (front and rear access)
Total front access (no rear access)
R
F
D10
P
EIA/WECO
ETSI
D
E
-
For complete specifications, please contact ADC.
10/03 • 100571
600 mm Products
105
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Power Distribution Products
Traditional GMT Series

Catalog Number
GMT
Fuse Type
Fuse Configuration*
CHASSIS HEIGHT
STANDARD TOTAL FRONT ACCESS
Single power feed, 10-position
Single power feed, 20-position
Single power feed, 40-position
Dual power feed, 10/10-position
Dual power feed, 20/20-position
1.75" (4.44 cm)
1.75" (4.44 cm)
1.75" (4.44 cm)
1.75" (4.44 cm)
1.75" (4.44 cm)
1.75" (4.44 cm)
3.50" (8.89 cm)
3.50" (8.89 cm)
3.50" (8.89 cm)
3.50" (8.89 cm)

G
Putty white
Black
Panel Color
P
B
S10
S20

S40
D10
D20
*Custom fuse panel configurations available with certain minimums
**EIA (Electronic Industries Association), WECO (Western Electric Company),
ETSI (European Telecommunications Standards Institute)
LED Configuration
Power on and fuse alarm
LEDs (per fuse holder)
Fuse alarm LED only
(per fuse panel)
P
F
Alarm Contact Connection
Wire-wrap
Screw-down barrier
terminal strip
W
S
PWX-001 G
Two-hole compression
lug (stud-type)
Set screw barrel connector
Powering Input
C
S
Screw-down barrier
terminal strip
Set screw barrel terminal
strip

Powering Output
S
B
Access
Standard (front and rear access)
Total front access (no rear access)
R
F
Mounting Option**
EIA/WECO
ETSI
D
E
With input power up to 65 Amps per bus, the
Traditional GMT Series eliminates the need to stock
varying amperage fuse panels. Fuse management
is simplified by accommodating up to 15 Amps
of output power per fuse position – without the
need to space fuses. A self-configuring voltage
and polarity feature allows a single panel to
support most applications, providing ±24Vdc
or ±48Vdc power.
For complete specifications, please contact ADC.
10/03 • 100571
600 mm Products
106
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Power Distribution Products

Advantage Series
™
Platform
The Advantage Series platform accepts input power up to 300 Amps per bus, up to 125 Amps per
high-current output position, and up to 15 Amps per GMT fuse position (optional). A patent-pending
design, the Advantage Series platform can be configured to meet unique network powering needs.
Select from various input power cable routing types, fusing options and alarm connectors. Industry
standard “bullet” terminal breakers or fuses can be mixed within a single panel, allowing maximum
flexibility.
PowerWorx panels are independently tested to comply with the industry’s highest standards,
including CE, IEC, UL, NEBS Level 3, Telcordia (Bellcore), CSA, and NEC 2002.
Compact, flexible PowerWorx configurations suit most network applications. Using the universal
mounting brackets, the panel can be flush- or recess-mounted into 19-inch (48.3 cm) and 23-inch
(58.4 cm) Electronic Industries Association (EIA) and Western Electric Company (WECO) racks.
Catalog Number
PWX-061R__ __ __ __ __ __ __
Bus
D Dual
High-Current Output
Per Bus
6 6-position
GMT Fuses
Y Yes (4/bus)
NNo
GMT Output Connector
S Screw-down
X No GMT fuses
requested
Input Cabling
T Top-down with GMT fuses

X No GMT fuses
Color
P Putty
Alarm Terminal Type
S Screw-down
W Wire-wrap
D
6P
For complete specifications, please contact ADC.
10/03 • 100571
600 mm Products
107
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
Fingerguard
FG-01A
Front View
Designation
Card
DCK-01A
PowerWorx
®
Power Distribution Products
Advantage Series
™
Platform
Accessories
*Carling Breakers *TPC Fuses/Fuse Holder
1 AMP: CA1-X0-09-571-A21-MG 15 AMP: TPC-15
10 AMP: CA1-X0-09-572-A21-MG 20 AMP: TPC-20
20 AMP: CA1-X0-09-573-A21-MG 25 AMP: TPC-25

30 AMP: CA1-X0-09-574-A21-MG 30 AMP: TPC-30
40 AMP: CA1-X0-09-575-A21-MG 40 AMP: TPC-40
50 AMP: CA1-X0-09-576-A21-MG 50 AMP: TPC-50
60 AMP: CA1-X0-09-577-A21-MG 60 AMP: TPC-60
75 AMP: CA1-X0-09-578-A21-MG 75 AMP: TPC-75
90 AMP: CA1-X0-09-634-A21-MG 90 AMP: TPC-90
100 AMP: CA1-X0-09-635-A21-MG 100 AMP: TPC-100
125 AMP: TPC-125
*TPC Fuse Holder - TPCDS-BBE-2
*Other ratings upon request.
Compression Lugs
For Two-Hole Stud-type Input Power Connections
Description
Compression lug, ships two per pack
2 AWG
1 AWG
1/0 AWG
2/0 AWG
3/0 AWG
4/0 AWG
250 KCMil
300 KCMil
350 KCMil
Catalog Number
CL-02M
CL-01M
CL-01M0
CL-02M0
CL-03M0
CL-04M0

CL-250M
CL-300M
CL-350M
Ordering Information
Compression lugs provide a robust and reliable electro-mechanical connection.
Miscellaneous Accessories
Description
Circuit breaker fingerguards, ships 12 per pack
Circuit breaker/TPC fuse designation cards,
ships 12 per pack
*TPC fuse holder adapter, ships 12 per pack
* Required for mounting TPC fuse holder in Advantage Platform
Catalog Number
FG-01A
DCK-01A
FHA-01A
Fingerguard
FG-01A
Side View
FHA-01A
Ordering Information
10/03 • 100571
600 mm Products
108
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Accessories
Description
Fuse puller, ships two per pack

Catalog Number
FP-G
Ordering Information
GMT Fuse Puller
The compact puller grips firmly to remove GMT fuses.
Description
Designation card holder kit Includes:
1 plastic designation card holder
2 designation cards and window
Catalog Number
DCK-02
Ordering Information
Designation cards held in pressure-sensitive card holder enable
easy identification and location of fused equipment.
Designation Card Holder and Cards
Description
GMT designation pin holder ships two per pack
Holds up to ten fuse designation pins
Adhesive back allows for quick and
easy mounting
Catalog Number
DPK-01
Ordering Information
GMT designation pin holder securely holds designation pins for improved
fuse value identification.
GMT Designation Pin Holder
10/03 • 100571
600 mm Products
109
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42

PowerWorx
®
Accessories
Fuses
Description
TPM Fuses
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Fuse
Miniature Disconnect, English
Miniature Disconnect, Metric
Catalog Number
TPM-03
TPM-04
TPM-05
TPM-06
TPM-07
TPM-08
TPM-10
TPM-12
TPM-15

TPM-20
TPM-25
TPM-30
TPMDS-E
TPMDS-M
Ordering Information
Ampere Rating
3 Amp
4 Amp
5 Amp
6 Amp
7 Amp
8 Amp
10 Amp
12 Amp
15 Amp
20 Amp
25 Amp
30 Amp
3-30 Amp
3-30 Amp
Description
TPA Fuses -
Alarm Indicator
3 Amps
5 Amps
10 Amps
15 Amps
20 Amps
25 Amps

30 Amps
40 Amps
50 Amps
Catalog Number
TPA-03
TPA-05
TPA-10
TPA-15
TPA-20
TPA-25
TPA-30
TPA-40
TPA-50
Ordering Information
Description
KLM Fuses -
Non-Indicator*
5 Amps
10 Amps
15 Amps
20 Amps
25 Amps
30 Amps
KLM Dummy
* All KLM fuse modules house a fuse alarm indicating red LED.
Catalog Number
KLM-05
KLM-10
KLM-15
KLM-20

KLM-25
KLM-30
KLM Dummy
10/03 • 100571
600 mm Products
110
www.adc.com • +32-2-712-65-00 • +32-2-712-65-42
PowerWorx
®
Accessories
Fuse Size
2/10 Amps
1/4 Amps
3/8 Amps
1/2 Amps
3/4 Amps
1 Amps
1-1/3 Amps
1-1/2 Amps
2 Amps
2-1/2 Amps
3 Amps
3-1/2 Amps
4 Amps
5 Amps
7-1/2 Amps
10 Amps
12 Amps
15 Amps
Dummy GMT

Color of
Indicator
Black-Red
Violet
White-Green
Red
Brown
Gray
White
White-Yellow
Orange
Orange-White
Blue
White-Blue
White-Brown
Green
Black-White
Red-White
Yellow-Green
Red-Blue
Pin Catalog
Number
P-2/10
P-1/4
P-3/8
P-1/2
P-3/4
P-1
P-1 1/3
P-1 1/2

P-2
P-2 1/2
P-3
P-3 1/2
P-4
P-5
P-7 1/2
P-10
P-12
P-15
Fuse Catalog
Number
F-2/10
F-1/4
F-3/8
F-1/2
F-3/4
F-1
F-1 1/3
F-1 1/2
F-2
F-2 1/2
F-3
F-3 1/2
F-4
F-5
F-7 1/2
F-10
F-12
F-15

GMT Dummy
Color of
Designation Pin
Black-Red
Violet
White-Green
Red
Brown
Gray
White
White-Yellow
Orange
Orange-White
Blue
White-Blue
White-Brown
Green
Black-White
Red-White
Yellow-Green
Red-Blue
Ordering Information
GMT Fuses/Fuse Designation Pins – Alarm Indicator
Compression Lugs For Two-Hole Stud-type Input Power Connections
Description
Compression lug, ships two per pack
2 AWG
4 AWG
6 AWG
14 AWG

Catalog Number
CL-02M
CL-04M
CL-06M
CL-14M
Ordering Information
Compression lugs provide a robust and reliable electro-mechanical connection.
Cable Management Bars For Standard (Front and Rear Access) Fuse Panels
Description
Cable management bar
Putty white
Catalog Number
CMB-P-19
Ordering Information