Tài liệu NP Series Programmable Terminal pptx

NP Series Programmable Terminal





* Ordering
information
* Specifications
* Configurations
* Dimensions,
and etc

can be found in our PDF

brochure.



Easy Setup with the Cost-
effective, Compact HMI

What do you need in a HMI? Display
visibility, information capacity, cost
effective? OMRON provides all of
these and goes further to reduce the
TCO, including operating efficiency,
by enabling connection of various
control devices, easy design work,
and the smoothest possible
connections.

NP Series Lineup
Operation Features

Transfer Screens at High Speed via USB Port

The USB interface lets you take full advantage of the computer
software environment. Transfer screens created on the computer
to the NP Series at high speeds.




USB Memory Stick for Program Upload/Download

Screen data can be transferred with a USB memory stick,
eliminating the need to carry a computer to the site.




Easier On-site Operation

Models with two different function key layouts are available to
meet the needs of your application design. The NP Series HMI case

is also available in two different colors: black or silver.



Use the Same Equipment Worldwide with Multi-Language

Support

The NP Series, screens, and Support Software are supported in
English, Chinese, many European languages, and Japanese. Also,
the NP Series HMI meets international standards so it can be
exported or imported across country borders easily.




Hardware Features

Compact Design Reduces the Mounting Work

At 130.1 × 104.8mm (NP3: W × H), this NP Series HMI is small
enough to be mounted in the same space as a handful of switches,

and it requires only one mounting hole in the control panel. You
get less work and a less crowded operating section.




Install in Most Environments

The front of the panel has IP65 water resistance, allowing the NP
Series HMI to be used in environments where mist or splashing
cooling water is present.

Compact, Yet Plenty of Information

The same data shown on NP5 can also be reflected clearly on an
NP3, without compromising the display clarity. This proves to show

the advanced display capabilities of both NP series HMI.



Connection Features

Reduce Connection Design and Onsite Work

For Easy Maintenance without a PC

The NP Series HMI provides an OMRON CP1L/CP1H PLC
Programming Console function, which allows users to check their
PLC program and monitor/trigger inputs/outputs.




For Easy Development without Programming

NP Series HMI is able to connect to OMRON EJ1 Temperature
Controllers. The NP Series can be operated immediately using the
sample screens included with the NP-Designer (Support Software).

Reduced Wiring Work

The NP Series HMI is equipped with both a RS-232 port and a
configurable RS-422A/485 port so you can connect to a PLC or
Temperature Controller with a single cable. You get reduced wiring

work and easier maintenance.




Multi-vendor is Now Available

Including OMRON and Mitsubishi, support is provided for PLCs
from major global manufacturers. The NP Series HMI can be used
with your current PLC without redesigning the system. It doesn’t
matter if you use a different PLC manufacturer for each project.




Multivendor List:

Manufacturer Series
RS-
232C
RS-
422A

RS-
485
Omron
Host Link
○ ○

C/CPM/CQM PLC
Host Link
○ ○

CS/CJ/CP1/CV/CVM PLC
NT link (1: N) *
○ ○

NT link (1: 1)
○ ○

EJ1
○
Allen-Bradley
MicroLogix
○

SLC5
○

GE Fanuc 90 series SNP
○ ○

Keyence KV/KZ series

○

LG (LS)
Master-K120S/200S
○

Glofa GM6 CNET
○ ○

Master-K CNET
○ ○

XGT CNET
○ ○

Matsushita
Electric Works,
Ltd.
FP series
○

Mitsubishi Electric

Corporation
FX/FX2N CPU port
○

FX3U CPU port
○

FX series computer link
○

○
A series computer link
○

A2A/A2AS/A2USH
○

A1SH/A3N/A2ASH CPU
port
Q series CPU port
○

Q series computer link
○ ○

Modbus
984 RTU/ASCII (Master)


○
RTU/ASCII Hex Address
(Master)


○
RTU/ASCII nW and RTU
2W (Master)

○
RTU/ASCII (Slave)


○
Modicon
TSX Micro (Uni-Telway)
*
○

○
NEZA (Uni-Telway) *
○

○
TWIDO
○

Siemens
S 7200
○

○
S7-300 (there to be PC
adapter)
○

S7-300 (there is no PC

adapter,) *

○
NULL NULL driver
Communication
parameter is not
set

* Please refer to NP Host Connection Manual for details

Software Features

NP-Designer



NP Designer is a new software dedicated for NP series models. It
has all the advanced features and user friendly interfaces to assist
users in programming their ideal screens. From basic
lamps/switches to advanced graphic controls, the NP Designer will
compliment user’s needs to further illustrate their views of actual
conditions at sites.




Software Simulation for Easy Troubleshooting

NP Designer is equipped with a TEST Mode which is like a
simulation to enable users the advantage of testing their program

without actually connecting to PLC/Host, it also serves as an
excellent troubleshooting tool.



Application Examples

Example of Applications that Provides Added Value to
Equipment

Example 1:




Example 2:





Example 3:




Example 4:
top
See Related Products:

Programmable Controller


CP1L
Complete with a standard-feature USB port, for
applications with as few as 10 points, to 60 points.
