Introduction
Head Office: Bac Ninh Province, Vietnam
Area: 6,600 M2
Warehouse & Transportation
ATEC Instrument & Chemical Co., Ltd. was established in Vietnam in 2012 to
provide the best service for Water treatment, Instruments and Chemicals to the
Vietnamese market.
Vietnam’s Industry had started developing from the 1990s, and has now
become a major developing nation. Over the years, the new requirement for Water
treatment, Instruments and Chemical has become a new market for Suppliers and
Makers in the world.
ATEC was established to meet this market demand with the necessary facilities,
technicians and management. ATEC is currently supplying the complete solution for
various customers in Vietnam.
•ATEC is licensed by ISO 14001 and ISO 9001 to guarantee the quality of our
products and services.
•ATEC is a localized company with international-level technology. Our
technical engineers are well-trained and qualified to perform calibration and
technical services to our customers.
•ATEC is an international company currently providing service for investors in
Vietnam from over 20 different countries.
•ATEC is supported by famous Makers in the world to guarantee the quality,
cost and immediate service to the Vietnamese market. And by utilizing updated
and world-class level technology, we provide the best solution for our
customers.
2
Introduction
Head Office: Bac Ninh Province, Vietnam
Area: 6,600 M2
Warehouse & Transportation
ATEC Instrument & Chemical Co., Ltd. was established in Vietnam in 2012 to
provide the best service for Water treatment, Instruments and Chemicals to the
Vietnamese market.
Vietnam’s Industry had started developing from the 1990s, and has now
become a major developing nation. Over the years, the new requirement for Water
treatment, Instruments and Chemical has become a new market for Suppliers and
Makers in the world.
ATEC was established to meet this market demand with the necessary facilities,
technicians and management. ATEC is currently supplying the complete solution for
various customers in Vietnam.
•ATEC is licensed by ISO 14001 and ISO 9001 to guarantee the quality of our
products and services.
•ATEC is a localized company with international-level technology. Our
technical engineers are well-trained and qualified to perform calibration and
technical services to our customers.
•ATEC is an international company currently providing service for investors in
Vietnam from over 20 different countries.
•ATEC is supported by famous Makers in the world to guarantee the quality,
cost and immediate service to the Vietnamese market. And by utilizing updated
and world-class level technology, we provide the best solution for our
customers.
2
Facilities
Water Treatment Chemical
production
Industrial Chemical Supply
Cleaning service
for RO membrane
Regeneration service
for polisher resin
Laboratory analysis service
for cooling and boiler water
Training service
for chemical and instrument
Instrument calibration service
for power plant
Chemical transfer service
for HF and E-grade chemical
3
Chemical Division
Chemical for Cooling and Chiller water system
No.
PRODUCT NAME
PRODUCT NUMBER
FUNCTION
REMARK
1
Open system compound
AC-101
* Scale inhibitor
* Corrosion inhibitor
2
Open system compound
AC-102
* Scale inhibitor
* Corrosion inhibitor
3
Open system compound
AC-103
* Micro-organism controller
4
Open and close system
compound
AC-104
* Micro-organism controller
5
Close system compound
AC-105
* Scale inhibitor
* Corrosion inhibitor
6
Equipment cleaner
AC-106
* De-scale formed in heat
exchanger or condenser
* Weak cleaning solution
7
Equipment cleaner
AC-107
* De-scale formed in heat
exchanger or condenser
* Strong cleaning solution
* Under special supervising
8
Open system compound
AC-108
* Scale inhibitor
* Corrosion inhibitor
* Alti-microbial
* Cafa Bas
Chemical for RO system
No.
PRODUCT NAME
PRODUCT NUMBER
FUNCTION
1
Altiscale Compound
AC-701
* Metal oxides
* Hardness scale inhibitor
2
Strong Altiscale Compound
AC-702
* Silica scale inhibitor
3
Slurry control compound
AC-703
* Slurry scale inhibitor
4
Anti bio compound
AC-704
* Organics scale inhibitor
5
Chlorine reducer
AC-705
* Reduction agent
6
Scale cleaning agent
AC-706
* Inorganic cleaning
7
Scale Cleaning agent
AC-707
* Organic cleaning
REMARK
* Feed water pretreatment
4
Chemical Division
Chemical for Boiler water system
NO.
PRODUCT NAME
PRODUCT NUMBER
FUNCTION
REMARK
1
Boiler Compound
AC-001
* Scale inhibitor
* Corrosion inhibitor
* Oxygen scavenger
* Food grade
2
Boiler Compound
AC-002
* Scale inhibitor
* Corrosion inhibitor
* Oxygen scavenger
* Industrial grade
3
Boiler Compound
AC-003
* Scale inhibitor
* Corrosion inhibitor
* Oxygen scavenger
* Food grade
* Be used for low pH/low
conductivity water
4
Boiler Compound
AC-004
* Scale inhibitor
* Corrosion inhibitor
* Oxygen scavenger
* Industrial grade
* Be used for low pH/low
conductivity water
5
Boiler Compound
AC-005
* Strong scale and sludge
controller
* Food grade
6
Boiler Compound
AC-006
* Strong corrosion inhibitor
* Food grade
7
Boiler Compound
AC-007
* Strong corrosion inhibitor
* Industrial grade
8
Boiler Compound
AC-008
* Online scale cleaning
9
Condensate Treatment Agent
AC-009
* pH adjust and corrosion control
for steam and condensate
system
* Industrial grade
AC-010
* Create a passivation film to
protect the metal surface
* Industrial grade for
Horizontal Boiler
* In case Boiler’s stop
operation
10
Passivation Agent
Boiler & Cooling System: Acid cleaning & Pre-film Service
Degreasing
&
Precleaning
Troubleshooting
&
Maintenance
Chemical dosing
&
System checking
Inspection
&
Monitoring
Sampling
&
Analysis report
Descaling
&
Passiviation
5
Instrument Division
Water Quality Monitoring System - Water supply treatment plant
Cloud Monitoring Service
Operation and Monitoring, Anywhere,
Anytime from any devices
3G/GPRS/GSM
Cellular Network
Smart Controller
Smart Controller
NaOCl
tank
Pressure (Kgf/cm2)
Chlorine Residual (mg/L)
Before
After
Set point
Over
Pressure
Low limit
Pressure Trend Curve
Chlorine Trend Curve
SMS Alarm
Water Quality Monitoring System – Wastewater treatment plant
Cloud Monitoring Service
Operation and Monitoring, Anywhere, Anytime
from any devices
3G/GPRS/GSM
Cellular Network
Smart Controller
pH, SS, COD,
Wastewater treatment plant
Web Base Remote Monitoring
Smart Controller: Built-in SIM card. Can via 3G/GPRS/GSM cellular network transfer the data to web base SCADA.
Many kinds of smart sensor can choice: pH, SS, COD, Flow, Conductivity, DO, Chlorine, Pressure, Level, etc ..
Web Monitoring: No hardware Requirement. No Network Administration. No Software Installation.
Can remote monitoring, data query, alarm summary, trend diagram, etc..
6
Instrument Division
Online Analyzer
COD analyzer
Total Nitrogen
analyzer
Dissolve Oxygen
analyzer
Chlorine analyzer
Fluoride/Chloride
analyzer
Copper/Heavy
metal analyzer
Suspended Solid/
Turbidity analyzer
Ammonia analyzer
pH/ORP analyzer
Silica/Sodium/Hydrazine
analyzer
Sulfide analyzer
Flow meter
Phosphate analyzer
Conductivity/Resistivity
analyzer
Color analyzer
Specific Gravity
meter
Laboratory Analyzer and Equipment
Benchtop pH.ORP.ION
or Conductivity meter
Water still
UV/Visible
Spectrophotometer
Portable pH.ORP.DO
or Conductivity meter
Colony counter
Mini
Spectrophotometer
Hotplate and Stirrer
Jar Test machine
Stirrer and Mixer
Reagent for
Spectrophotometer
and Laboratory
Thermal reactor
Exhaust/Oven/Centrifuges
Equipment
Laboratory table
Storage box
7
Other ATEC Products
Water treatment Equipment and Material supply.
1. Cartridge filter
2. RO/UF membrane
3. Activated carbon
4. UV lamp, Ozone
5. Cation /Anion Polisher
resin
6. MBR – Membrane
Bio Reactor
Industrial Chemicals Supply
1.
2.
3.
4.
5.
6.
7.
8.
PAC (Poly Aluminum Chloride).
Cation / Anion / Non-ion polymer.
Chelating / De-color / De-former.
Electronics / Industrial chemical: HF; H2O2; IPA; Mixed Acid; HCl; H2SO4; NaOH.
Hydrazine.
Laboratory Reagents.
Fine chemicals.
Electronic materials.
ATEC INSTRUMENT & CHEMICAL CO., LTD.
Head office: TS6 Street, Tien Son Industrial Zone, Tien Du District, Bac Ninh Province, Vietnam
Tel: (+84-241) 3715 501
Fax: (+84-241) 3715 507
Branch: No.3, Street 20, Song Than 2 Industrial Zone, Di An District, Binh Duong Province, Vietnam
Tel: (+84-650) 3737 615
Fax: (+84-650) 3737 614
Website : www.atecvn.com.vn. Mobile: 0912
88 87 86
E-mail: /
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
About Suntex
Suntex Instruments Company Ltd., established in 1982, has
gained prestige and trust from our customers for dedication of
providing professional, high-quality water analysis products and
first-rate customer service.
30 Years Quality Solution & Service
Online Measurement and Control
Through 30 years experience and innovation, Suntex has
launched its fifth generation of pH transmitter PC-3110, we called
it intelligent transmitter, in 2010. The new intelligent transmitter
series includes pH/ORP, Conductivity/Resistivity, and Dissolved
Oxygen models which are the most important parameters in the
process controlling. The intelligent transmitter features for 1/4 DIN
housing with IP65 protection, graphical menu, last calibration and
overview of setting at a glance, and auto-sense backlight display,
etc. There are also RS-485 Modbus models and PID controlling
models to satisfy various demands. All of them are the proof of
our continuous research and development to make the online
measurement and controlling easier and more reliable.
Portable and Laboratory Instruments
The accuracy and reliability of the Suntex portable and Laboratory
instruments is guaranteed by the online measurement experience.
Suntex provides a variety of pH/ORP, Conductivity/Resistivity/TDS/
Salinity portable and benchtop meters to universities, research
centers, environment inspection labs, and applications of various
industries. There are also Colony Counter, COD Thermoreactor,
Hotplate & Stirrer, and Automatic Waterstill for most of general
laboratories usage.
ISO 9001: 2000 Certificated since 2001
Suntex has been certificated by TUV Management Service GmbH,
Germany since 2001 for Distribution of Instruments & Equipments
and Development and Production of Meters & Transmitters.
2
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
Main Applications
PC-3100
Wastewater
EC-430/410
Pure water
Industrial Process
PC-3110
Cooling water / Boiler water / Scrubber
EC-4110
Application table for parameters of SUNTEX online transmitters
pH/ORP
Cond/Res
D.O.
Wastewater
◎
◎
◎
Cl2
Turb/S.S
ION
◎
Pure water
◎
◎
◎
Cooling water
◎
◎
Boiler water
◎
◎
Scrubber
◎
◎
Surface water
◎
◎
Drinking water
◎
◎
Electronics Industry
◎
◎
◎
◎
Chemical Industry
◎
◎
◎
◎
Food & Beverage Industry
◎
◎
◎
◎
Pharma Industry
◎
◎
◎
Fish farm
◎
◎
◎
Swimming Pool
◎
◎
◎
◎
◎
◎
◎
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
3
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
pH/ORP
How to build a pH Measurement System
G
C
F
E
D
B
A
B
C
D
E
F
G
A
Immersion system in open basin
Measurement in very variable water levels, or lakes with a float
Flow-through system
1/2” & 3/4” pipe mounted system
1” pipe mounted system
Side-entry system in vessel
Top-entry system in closed vessel
There are four major elements to make a complete
measurement system.
1. Transmitter: to translate the sensor’s reading into
a displayed measurement and transfer the data to
the process control system
2. Sensor: directly mounted in the field to measure
solutions
3.Cable: to transmit the signal between a sensor and
a transmitter
4.Sensor Housing: to hold the sensor, protect the
sensor in the measurement solutions, and to connect
to the extension cable
7
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
SUNTEX Intelligent Transmitter PC-3110RS
7 Intelligent Value-Added Features
Trace mode
Set up from 3 mins to four weeks
duration of the measured value
trend graph to help you master the
process history
1
Real-time chart mode
3 minutes real-time dynamic graph
to help you realize recent
development in control
2
RS-485 MODBUS protocol
Provides long-distance, multiple
values and configuration info
transmission and anti-electrical
signal protection
3
Events logbook
Actions, current output out of
range, power outages and error
records, no need for standby and
record them anymore
4
8
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
The all new intelligent transmitter's user-friendly interface and intelligent
information design, making the RS model not just for RS-485 communication. It
not only allows settings of RS-485 digital transmission easier, but also provides
trace record map, real-time dynamic graphics display in the measurements mode;
for calibration, it provides 5-point regression calculation calibration, product
adjustment and user-tailored pH/temp. data table calibration mode. There is also
a 50 events logbook for user to realize all the actions, current out of range, power
outage, entries of setup & calibration menu, and error occurrences for users to
master the whole situation.
The new PC-3110RS makes the functional designs of intelligent transmitters
to the extreme, to meet customers' requirement of ease of operation and the
maximization of process safety, and will position Suntex transmitter in the leader
of quality and innovation.
5 points calibration &
regression calculation
Accurate, wide-range calibration
to improve your process safety
5
Product adjustment
Measured value can be adjusted
to the same as lab sample value to
eliminate error concerns
6
pH/Temp. Define cal. mode
Accept all kinds of standard
buffers, self-built 5 pH/Temp. data
table, and directly auto calibration
with user-tailored buffer settings
7
9
Applications:
Industrial Process
Chemical Process
Water & Wastewater Treatment
Biochemistry
Scrubber
Recycling
Environmental protection
Features:
96 x 96mm Intelligent pH/ORP Transmitter
Waterproof and dustproof design
Solution-ground design eliminating interference of ground potential
Large LCM with auto-sense backlight and contrast setting function
User-friendly operation with text and graphic illustration, clear signs and easy to understand
Multi-Cal calibration, Tech. and NIST buffer automatic recognition
Max. 3-point calibration and the calibration line calculated by linear regression, the last calibration data
displayable
With password and multi-key design-security protection enhancement
Automatic temperature compensation, NTC30K or PT 1000 selectable
Two sets of isolated current output at DC 0/4~20mA, max. load 500Ω
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
Gradually continuous sample measurements average function to enhance stability
Automatic sensor clean function with programmable time interval
LED indicated alarm or washing status signal
IP 65 (NEMA 4X), CE approved
PC-3110RS / PC-3110RS-P Only:
Measuring value can be selected for figure or chart display
Trace mode can display historical measured value curve from 3-minute to 4-week program
Equipped with logbook function
Max. 5-point calibration, with customer definition buffer setting and calibration curve, which can be displayed
Equipped with one analog output and RS-485 interface
Field correction function
Mọi chi tiết xin liên hệ: Thắng
Product adjustment function for field correction
PC-3110-P / PC-3110RS-P Only:
10
Equipped with PID control function to maximize the stability of process
(Mr)
Email: /
Mobile: 0912 88 87 86
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
PC-3110/PC-3110RS
Specifications:
Model
PC-3110
PC-3110-P
Measuring modes
PC-3110RS
pH
-2.00~16.00 pH
ORP
-1999~1999 mV
Temp.
-30.0~130.0℃
pH
0.01 pH
ORP
1 mV
Ranges
Resolution
Temp.
0.1℃
pH
± 0.01 pH ± 1 digit
ORP
± 0.1% ±1 digit
Temp.
± 0.2℃±1 digit
Accuracy
PC-3110RS-P
pH/ORP/Temp.
Repeatability
±0.05pH
Automatic with NTC 30KΩ or PT-1000
Temperature compensation
Manual adjustment
Ambient Temperature
0~50℃
Input Impedance
>1012Ω
Large LCM with auto-sense backlight and contrast function
Display
Text mode
Analog output 1
Text, Chart or Trace mode
Isolated DC 0/4~20mA corresponding to pH/ORP, max. load 500Ω
Analog output 2
Isolated DC 0/4~20mA corresponding to
Temp., max. load 500Ω
-
Serial Interface
-
RS-485(MODBUS RTU or ASCII)
Logbook
-
50 data records
Any, Tech & NIST, Three Points
Any, Tech, NIST & Custom definition
buffer setting table , Five Points
Calibration mode
Contact
Setting
Wash
Activate
240VAC, 0.5A max. (recommend)
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited programmable, ON/OFF
-
*PID Control
-
Contact
240VAC, 0.5A max. (recommend)
Time
ON:0~99min.59sec. OFF:0~999 hours59min.
Voltage output
DC ± 12V, 1W max.
Power Supply
100~240VAC±10%, 9W max. , 50/60 Hz
Installation
Wall or pipe or panel mounting
Dimensions
96 mm x 96 mm x 132 mm (H x W x D), 1/4 DIN
Cut off Dimensions
93 mm x 93 mm (H x W)
Weight
0.5 kg
Protection
IP 65 (NEMA 4X)
*PID Control
*PID Control Function: P, PI, PD, PID control
*PID Control Output: Pulse Length, Pulse Frequency, Analogout
What’s included? 2 Panel Mounting clips, pH 4, pH 7 buffer solutions, Plastic L shaped electrode holder support, Precision driver
for wiring
Optional Accessories:
114.7
98
112
125
1. pH electrode
2. ORP electrode
3. PT-1000 ATC probe
4. NTC 30KΩ ATC probe
5. Field indication transmitter
6. pH buffer solutions
7. ORP buffer solutions
8. Cleaning solutions
9. Junction box
10. Flow-through chamber
11. Immersion electrode holder 1M, 2M and 3M
12. Industrial electrode protection housing/fitting
13. Extension cable
14. Sensor cleaning kit
15. Sun shield
16. Stainless holder support base
85.6
26
26
98
11
Applications:
RO System
Cooling water
Industrial process
Pure water
Boiler water
Water treatment
2-Electrode
Features:
96 x 96mm Intelligent conductivity/resistivity transmitter
Waterproof and dustproof design
Compatible with conductivity or resistivity measurement
4-Electrode
Compatible with 2- or 4-electrode conductivity cell
User-friendly operation with text and graphic illustrations, clear signs and easy to understand
Large LCM with auto-sense backlight and contrast setting function
With password and multi-key design-security protection enhancement
Automatic temperature compensation with NTC30K or PT1000
Temperature coefficient compensation by non-linear or linear
Two sets of isolated current output at DC 0/4~20mA, max. load 500Ω
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable set-points and hysteresis
Gradually continuous sample measurements average function to enhance stability
Automatic sensor clean function with programmable time interval
LED indicated alarm or washing status signal
IP 65 (NEMA 4X)
EC-4110RS only:
Measuring value can be selected for figure or chart display
Trace mode can display historical measured value curve from 3-minute to 4-week program
Equipped with logbook function
Equipped with one analog output and RS-485 interface
12
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
EC-4110/EC-4110RS
Specifications:
Model
EC-4110
EC-4110RS
Measuring modes
Range
Resolution
Accuracy
Conductivity/Resistivity
Conductivity
0.00 us/cm~200.0 ms/cm in 5 ranges; Auto or Fixed
Resistivity
0.00~20.00 MΩ·cm
Temp.
-30.0~130.0℃
Conductivity
0.01 / 0.1 / 1 μS/cm, 0.01 / 0.1 mS/cm
Resistivity
0.01 MΩ·cm
Temp.
0.1℃
Conductivity
± 1% (± 1 digit)
Resistivity
± 1% (± 1 digit)
Temp.
± 0.2℃ (± 1 digit)
Cell constant
0.01, 0.05, 0.1, 0.5, 10.0 cm-1 fixed, freely selectable 0.0080~19.99 cm-1
Automatic with three kinds of built-in standard solutions
Calibration
Manual cell-constant adjustment
Temperature compensation
Automatic with NTC 30K / PT 1000 or manual adjustment
Linear compensation at 0.00%~40.00%
Temperature coefficient
Non-linear compensation for natural water
Ambient temperature
0~50℃
Storage temperature
-10~70℃
Large LCM with auto-sense backlight and contrast function
Display
Analog output 1
Text mode
Text, Chart or Trace mode
Isolated DC 0/4~20mA corresponding to measuring range, max. 500Ω
Isolated DC 0/4~20mA corresponding to
temperature, max. 500Ω
-
Serial interface
-
RS-485 (MODBUS RTU or ASCII)
Logbook
-
Analog output 2
Setting
Wash
50 data records
Contact
240VAC, 0.5A max. (recommend)
Activate
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited programmable, ON/OFF
Contact
240VAC, 0.5A max. (recommend)
Activate
ON:0~99 min. 59 sec.
OFF:0~999 hours 59 min.
Power supply
100~240VAC ± 10%, 5W max., 50/60 Hz
Installation
Wall or pipe or panel mounting
Dimensions
96 mm x 96 mm x 132 mm (H x W x D), 1/4 DIN
Cut out dimensions
93 mm x 93 mm (H x W)
Weight
0.5 Kg
Protection
IP 65 (NEMA 4X)
What’s included? 2 Panel Mounting clips, Precision driver for wiring
114.7
Optional accessories:
1.
2.
3.
4.
98
132
125
2-electrode conductivity cell
4-electrode conductivity cell
Resistivity cell, 0.01/0.05/0.1
Specific cable 5M, 10M, 20M, 30M
or other length upon request
5. Standard solution,
84/1413us and 12.88ms
6. Flow through tees
7. Flow chamber
8. Sun shield
9. Immersion sensor holder 1M, 2M, and 3M
10. L shaped sensor holder support base
1
26
26
26.5
98
13
Applications:
Water and wastewater treatment
Fermentation
Industrial Process
Environment
WTW D.O. sensor
Features:
96 x 96mm Intelligent D.O. transmitter
Waterproof and dustproof design
Compatible with WTW TriOxmatic D.O. sensors or Mettler Toledo InPro D.O. sensors
Measuring unit: %, ppm, mg/l
Salinity correction & Atmospheric pressure correction
User-friendly operation with text and graphic illustration, clear signs and easy to understand
Large LCM display with auto-sense backlight and contrast setting function
Sensor slope performance display
Sensor self diagnosis for TriOxmatic 700 D.O. sensor
Simultaneous display of measurement value and temperature
Automatic temperature compensation
Two sets of isolated current output DC 0/4~20mA, Max.500Ω
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited contact outputs with programmable
set-points and hysteresis
Gradually continuous sample measurements average function to enhance stability
With password and multi-key design-security protection enhancement
Automatic sensor clean function with programmable time interval
LED indicated alarm or washing status signal
Mettler Toledo D.O. sensor
IP 65 (NEMA 4X)
DC-5110RS only:
Measuring value can be selected for figure or chart display
Trace mode can display historical measured value curve from 3-minute to 4-week program
Equipped with logbook function
Equipped with one analog output and RS-485 interface
Mọi chi tiết xin
14
liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
DC-5110/DC-5110RS
Specifications:
Model
DC-5110
DC-5110RS
Measuring mode
Measuring
range
Resolution
% / ppm / mg/L / TEMP.
%
0 ~ 600% (Depends on the sensor)
mg/L
0~60.00 mg/L (Depends on the sensor)
ppm
0~60.00 ppm (Depends on the sensor)
Temp.
0~140°C (Depends on the sensor)
%
0.1 %
mg/L
0.01 mg/L / 0.001 mg/L
ppm
0.01 ppm / 0.001 ppm
Temp.
0.1℃
%
mg/L
Accuracy
±0.5%±1Digit
ppm
Temp.
±0.2°C±1Digit with temperature error correction function
Temperature Compensation
NTC 30K or NTC 22K automatic compensation or manual adjustment
Salinity correction
0.0 ~ 45.0 ppt
Pressure correction
0.500 ~ 2.500 bar / 7.25 ~ 36.25 psi / 500~2500 mmHg manual adjustment
Ambient temperature
0~50°C
Storage temperature
-10~70°C
Large LCM with auto-sense backlight sensor for auto contrast function
Display
Text mode
Analog output 1
Text, Chart or Trace mode
Isolated DC 0/4~20mA corresponding to measurement, max. load 500Ω
Analog output 2
Isolated DC 0/4~20mA corresponding to
temperature, max. load 500Ω
-
Serial interface
-
RS-485 (MODBUS RTU or ASCII)
Logbook
-
Setting
50 event records
Contact
240VAC, 0.5A Max. (recommend)
Activate
Hi/Lo, Hi/Hi, Lo/Lo selectable two limited programmable, ON/OFF
Wash
Contact
240VAC, 0.5A Max. (recommend)
Time
ON:0~99min. 59 sec. OFF:0~999 hours 59 min.
Voltage output
DC±8V Max. 0.5W
Power supply
100V~240VAC ±10%~50/60Hz, 5W max.
Installation
Wall or Pipe or Panel mounting
Dimensions
96 mm × 96 mm × 132 mm (H×W×D), 1/4 DIN
Cut out dimensions
93 mm × 93 mm (H×W)
Weight
0.5Kg
Protection
IP 65 (NEMA 4X)
What’s included? 2 Panel Mounting clips, Plastic L shaped electrode holder support, Precision driver for wiring
Optional accessories:
1.
2.
3.
4.
5.
6.
7.
8.
9.
D.O. sensor
Membrane kit
Electrolyte
Cleaning solution
Immersive protection holder 1M, 2M and 3M
Junction box
Extension cable
Auto clean kit
Stainless holder support base
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86
112
85.6
132
1
26.5
15
pH/ORP
PC-3100 pH/ORP Transmitter
Robust protection and precise integration
The PC-3100 series pH/ORP transmitter has rugged IP 65 enclosure
and can be wall, panel, pipe mounted for installation in almost any
industrial application. The PC-3100RS offers RS-485 interface to
support digital communication to your PLC. The transmitters inherit
our reliable technology which features in accurate, robust, and easy to
use functions.
Applications:
Water treatment
Chemical process
Biochemical process
Wastewater treatment
Electrical process
Food and beverage process
Features:
pH, ORP, Temperature measurement
IP 65 waterproof and dustproof design
Back-lit LCD with ON/OFF/Auto programmable illumination
Two sets of isolated current output DC 0/4~20mA corresponding to measurement and temperature
Two Hi/Lo Limited contact outputs; Set points with programmable hysteresis function
Automatic temperature compensation
Gradually continuous sample measurements average function to enhance stability
Wash function with programmable time-interval control
LED indication alarm or wash status signal
Password protection
PC-3100RS with one analog output and one RS-485 interface
Model
Measuring
range
PC-3100
PC-3100RS
pH
-2.00 ~ 16.00 pH, ±0.01 (± 1Digit)
ORP
-1999 ~ 1999 mV, ±1mV (± 1Digit)
Temperature
-30.0~130.0°C, ±0.2°C (± 1Digit)
Temperature Compensation
Automatic with PT-1000 or NTC 30K or manual adjustment
Input impedance
>1012Ω
Display
Back-lit LCD display with auto-sense on/off/auto illumination
Analog output 1
Isolated DC 0/4~20 mA corresponding to measurement, max load 500Ω
Analog output 2
Isolated DC 0/4~20 mA corresponding to
temperature, max load 500Ω
-
Serial interface
-
RS-485 (MODBUS RTU or ASCII)
Calibration mode
Any , Tech & NIST buffer, Two points
Any , Tech & NIST buffer ,Three points
Setting
Wash
Contact
240 VAC, 0.5A max. (recommend)
Activate
Hi/Lo two limited programmable relay outputs, ON/OFF
Contact
240 VAC, 0.5A max. (recommend)
Time
ON: 0~9999 sec. / OFF: 0~999.9 hours
Ambient temperature
0 ~ 50°C
Storage temperature
-20 ~ 70°C
Voltage output
DC ±12V
Power Supply
100V~240VAC±10%, 50/60Hz
Installation
Wall mounting, Pipe mounting, Panel mounting
Dimensions
144 mm x 144mm x 115 mm (H x W x D), 1/2 DIN
Cut off dimensions
138 mm x 138 mm (H x W)
Weight
0.8 kg
Protection
IP 65 (NEMA 4X)
What’s included? 4 Panel mounting clips, pH4, pH7 buffer solutions, Plastic L shaped electrode holder support base
16
Mọi chi tiết xin liên hệ: Thắng (Mr)
Email: /
Mobile: 0912 88 87 86