amigurumi turtle(1)

AMIGURUMI TURTLE

First of all I want to ask you NOT to (re)sell this pattern OR to publish it anywhere
else. It’s
fully owned by YarnYard but you are allowed to remake this amigurumi doll and


sell the final
product on your local craft fair, bazaar, etc. You are NOT allowed to sell the
pattern OR the
final product on the internet. Thank you!

The terminology of amigurumi The terminology of amigurumi
St(s): Stitch(es)
SS: Slip stitch
SC or Single Crochet: 2 stitches in 1 stitch - Insert hook in stitch stated, pull up
a loop, yarn over and pull through both loops
DC or Double Crochet: Same as the single crochet stitch but twice as high Yarn over, insert hook in stitch stated, pull up a loop, yarn over, pull through 2
loops, yarn over, pull through 2 loops
HDC or Half Double Crochet: yarn over insert hook in stitch stated, pull up a
loop yarn over pull
through all 3 loops on hook
TC or Triple Crochet: Same as the single crochet stitch but 3 times higher Yarn over twice, insert
hook in stitch stated, pick up a loop, yarn over, pull through 2 loops, yarn over,
pull through 2 loops, yarn over pull through 2 loops
INCR or Increase: 2 SC in 1 stitch - Insert hook in stitch stated, pull up a loop,
yarn over and pull
through both loops, Insert hook in the same stitch, pull up a loop, yarn over and
pull through both
loops
DEC or Decrease: stitch 2 stitches together – Pick up a loop in stitch stated, pick

up another loop in stitch stated and pull this one through all stitches


YOU'LL NEED
Yarn: Light weight in the colors white, beige, green, brown and black.
Materials: scissor, hook size 3.5, needle and fiberfill for stuffing.

HEAD
Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with beige colored yarn.
1. Magic loop (6sts)
2. INCR in every st (12sts)
3. INCR in every 2d st (18sts)
4. INCR in every 3d st (24sts)
5. INCR in every 4th st (30sts)
6. INCR in every 5th st (36sts)
7. INCR in every 6 th st (42sts)
8. INCR in every 7 th st (48sts)
9. INCR in every 8 th st (54sts)
10. SC for 8 rounds (54sts in each round)
11. DEC every 8th and 9th st together (48sts)
12. DEC every 7th and 8th st together (42sts)
13. DEC every 6th and 7th st together (36sts)
14. DEC every 5th and 6th st together (30sts)
15. DEC every 4th en 5th st together (24sts)
16. DEC every 3d and 4th st together (18sts)
17. Turn the project inside out
-Stuff the head with fiberfill

18. SC for 25 rounds (18sts in each round)
-Stuff thalf of the neck with fiberfill
19. Finish off with a SS and Sew the gap horizontallys

EYES - white part (2)
Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with white colored yarn.
1. Magic loop (6sts)
2. INCR in every st (12sts)
3. INCR in every 2d st (18sts)
4. INCR in every 3d st (24sts)


5. INCR in every 4th st (30sts)
-Switch over to beige colored yarn
6. SC around (30sts)
10. Finish off with a SS
-Use the picture as reference

EYES - iris (2)
Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with black colored yarn.
1. Magic loop (6sts)
2. INCR around (12sts)
-Switch over to green colored yarn
3. SC in the next 10 sts
4. Finish off with a SS
-Sew this on the white part of the eye.
-Sew the final product on the sides of the head. Use the picture as reference.

HAT
Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with brown colored yarn
1. Magic ring (6sts)
2. INCR in every st (12sts)
3. INCR in every 2d st (18sts)
4. INCR in every 3d st (24sts)
5. INCR in every 4th st (30sts)
6. INCR in every 5th st (36sts)


7. INCR in every 6th st (42sts)
8. INCR in every 7th st (48sts)
9. SC in the next round (48sts)
10. SS in the back loop only (48sts)
11. SC in the next 5 rounds (48sts in each round)
12. SS in the front loop only - the one pointing outside of the project (48sts)
13. SC in the next round (48sts)
14. Chain 1 and start doing HDC in the next round (48sts)
-Finish off with a SS
-You need to attach the hat on the head now. pin it on the top of the head to
keep it on the desired position before sewing it on. You can use the picture as
reference.

SHELL
Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with green colored yarn
1. Magic ring (6sts)
2. INCR in every st (12sts)

3. INCR in every 2d st (18sts)
4. INCR in every 3d st (24sts)
5. INCR in every 4th st (30sts)
6. INCR in every 5th st (36sts)
7. INCR in every 6th st (42sts)
8. INCR in every 7th st (48sts)
9. INCR in every 8th st (54sts)
10. INCR in every 9th st (60sts)


11. SC in the next 12 rounds (60sts in each round)
-Switch over to beige colored yarn
12. SC in the next 4 rounds (60sts)
13. DEC every 10th and 11th st together (54sts)
14. DEC every 9th and 10th st together (48sts)
15. DEC every 8th and 9th st together (42sts)
16. DEC every 7th and 8th st together (36sts)
17. DEC every 6th and 7th st together (30sts)
18. DEC every 5th and 6th st together (24sts)
19. DEC every 4th and 5th st together (18sts)
20. DEC every 3th and 4th st together (12sts)
-Stuff the doll with fiberfill
21. DEC every 2d and 3d st together (6sts)
-Finish off with a SS and sew the gap
-You need to attach the head on the body now by sewing the neck at the bottom
of it. Use the picture as reference. To make the neck steady you're going to sew
it along the body so that it will stay up by itself.


LEGS (2)

Will be worked in continual rounds of sc, you may like to use a stitch marker.
-Start with beige colored yarn
1. Magic ring (6sts)
2. INCR in every st (12sts)
3. INCR every 2d st (18sts)
4. INCR every 3d st (24sts)
5. SC in the next 4 rounds (24sts in each round)
6. DEC every 3d and 4th st together (18sts)


7. SC in the next 4 rounds (18sts in each round)
8. DEC every 2d and 3d st together (12sts)
7. SC in the next 3 rounds (12sts in each round)
-Stuff with fiberfill
8. Finish off with a SS and sew the horizontally
-Sew the parts underneath the body. Use the picture as reference.

TAIL
Will be worked in continual rounds of sc, you may like to use a stitch marker.


-Start with beige colored yarn
1. Magic ring (6sts)
2. INCR in every 2d st (9sts)
3. SC in the next 4 rounds (9sts in each round)
4. INCR in every 3d st (12sts)
5. SC in the next 3 rounds (12sts in each round)
6. INCR in every 4th st (15sts)
-Stuff with fiberfill
7. Finish off with a SS and sew the gap horizontally

-Sew this part underneath the shell. Use the picture as reference

Details
Althrough, you can find some detaills around the shell and it's mouth.
The details will be sewed on with a needle, using the desired colour of yarn.
-I used green for it's mouth (located between the two eyes, leaving 6 sts space
between the begin and end point of the mouth).
-For the shell I used some beige colored yarn.