Tài liệu COPPER AND FIBER BUILDING ENTRANCE TERMINALS doc

1st Edition
COPPER AND FIBER
BUILDING ENTRANCE TERMINALS
Building Entrance Terminals
3
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Fiber Wall Boxes ........................................................Page 4
Protection Devices......................................................Page 9
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Fiber Wall Boxes
4
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC’s FL1000-K is designed for use in
environmentally unfriendly locations. The wall
mount box is classified as a NEMA 4x, ideal for
manufacturing environments that have airborne
particles. The box is constructed from heavy
gauge aluminum and painted with a fade-
resistant finish. Four 1-inch holes are equipped
with hole plugs factory-installed, eliminating
the need for the craftsperson to cut any entry
or exit holes in the box.
It is recommended that the FL1000-K be used
with multifiber cable assemblies for both the
incoming and exiting fiber.
Compression fitting (optional)
and hole plug (factory-installed)
Features
• Two cable strength member tie-off kits

• Stainless mounting hardware
• Tool for removal of front door
• Dimensions (H x W x D): 17" x 19" x 5.6"
(43.18 x 48.26 x 14.22cm)
NEMA 4x-Classified Wall Mount Box
Ordering information follows on the next page
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Fiber Wall Boxes
5
www.adc.com • +1-952-938-8080 • 1-800-366-3891
FL1- K __ __ __ __ NN __ - 0 __ __ 20
Wall Box Type
K 24-position NEMA
4x-rated box
Splice Tray with Chip
1 Bare fusion
2 Heat shrink fusion
3 Mechanical
(elastomeric)
4 Rotary
6 FibrLok
®
7 Nortel QPAK
N None
Accessories
6 Compression fittings
7 Bonding grounding kit
6paks not Installed into Wall

Box (with or without Fiber)
OR
1 Adapters with pigtails
(2.0 mm x 3.0 m)
2 Adapters only
N None/NA
5 6-fiber softwall bundle pig-
tails (3m)
6paks Installed into Wall Box
(with or without Fiber)*
3 Adapters with pigtails
pre-installed into wall box
(2.0 mm x 3.0 m)
4 Adapters pre-installed into
wall box
6 6-fiber softwall bundle
pigtails (3m) pre-installed
9 12-fiber ribbon pigtails
(3m) pre-installed
Multimode and Singlemode
6pak Adapter/Connector Type
Singlemode
Multimode
0 Blank
N None/NA
2 FC ultra polish
4ST
®
ultra polish
7 SC ultra polish

C SC duplex with
zirconia sleeves
E SC duplex
F FC angled polish
J SC angled polish
L FC with zirconia sleeves
PST
®
with zirconia sleeves
R SC with zirconia sleeves
X LX.5
®
8LC
5ST
®
9SC
AFC
D SC duplex
Y LX.5
®
6LC
1 2 3A 3B 3C 4 5 6 7 8 9
Number of splice trays
received depends on
amount of 6paks used:
(1-2) 6paks = 1 splice tray
(4) 6paks = 2 splice trays
*Use the guide to the right for
placement of factory-installed 6paks.
Place the desired connector or

adapter type (from guide above)
above the corresponding location
designation of 3A, 3B or 3C.
The diagram illustrates the location
of each 6pak within the bulkhead.
Enter the desired quantity
(0-9) above the correspon-
ding accessory.
How to order an FL1000 4x rated wall mount box
1. Select wall box type
2. Select 6pak (with or without fiber) not installed in wall mount box OR
Select 6pak (with or without fiber) installed in wall mount box
3. Select 6pak adapter type (if factory installed, choose placement in the wall mount box)
4. Select splice tray with chip
5. No cable clamps are needed
6. Select number of compression fittings (0-9)
7. Select number of bonding grounding kits (0-9)
8. (2) strength member tie-offs are included
9. No locks are available
NEMA 4x-Classified Wall Mount Box
3
C
3
C
3
A
3
B
Wall-Mount
Side View

Door Side
Mounting
Wall Side
Viewed from
Equipment Side
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Fiber Wall Boxes
6
www.adc.com • +1-952-938-8080 • 1-800-366-3891
ADC’s family of NEMA fiber demarcation products provides termination and splicing for fiber cables
in environments requiring secure, low profile enclosures. Built with traditional ADC quality and durability,
the products promise long service life in harsh, outside plant environments and help ensure network
reliability and flexibility.
NEMA Fiber Demarcation Box (FDB)
Features
• Designed to meet NEMA 12 (dust proof, drip proof)
• Wall mountable in harsh indoor and remote environments
• Quick installation and cable routing; reduces cost of installation and network maintenance time
• Accommodates top or bottom cable entry
• High density, aesthetically attractive design; features rounded, removable front door
• Space saving, dual fold design with locking, technician-friendly splice area and easy hand access
to fiber connectors
• Separation of termination, splicing functions protects circuit integrity
• Multiple locking options, including separate lock on splice area; control access
to critical parts of the wall box
• Uses familiar industry interfaces; ADC sliding adapter packs (six packs) with FC, SC, ST
®
, LX.5

®
or LC connectors, provide high density with superior hand access
• Accommodates MicroVAMs for signal distribution, WDM and monitoring/test applications
• Ideal for ribbon splicing; supports stranded splicing
Ordering information follows on the next page
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Fiber Wall Boxes
7
www.adc.com • +1-952-938-8080 • 1-800-366-3891
Catalog Number
FDB-
_S_ __ __ __ _S_ _X_ __ __ _0_ __ __ __ __ 0
1 12 fibers
2 24 fibers
4 48 fibers
7 72 fibers
9 96 fibers
Box Size
2 FC ultra polish
L FC with zirconia adapter
7 SC ultra polish
N SC with zirconia adapter
J SC angled polish
4ST
®
ultra polish
PST
®

with zirconia adapter
X LX.5
®
8LC
Singlemode
A Adapters only
U 6-fiber stranded
R 12-fiber ribbon
4 12-fiber Maxi-Strip (stranded)
Pigtail or Adapter Type
0 None
2 Heat shrink fusion
3 Mechanical/ribbon
Splice Tray/Chip Style
0 No clamps included
1 1 clamp included
2 2 clamps included
Cable Clamps
A Front lock 1, rear lock 2
B Front lock 2, rear lock 1
C Front lock 1, rear quarter turn
D No front lock, rear lock 1
E No front lock, rear lock 2
F No front lock, rear quarter turn
Lock Options
0 No strength member tie-offs included
1 1 strength member tie-off included
Strength Member Tie-offs
Number of 6packs loaded
Adapter/Connector Type

Multimode
9SC
5ST
®
Y LX.5
®
6LC
OR
Fiber Demarcation Box: with Pigtails
Specifications
DIMENSIONS (H x W x D)
12- and 24-position: 7.2" x 13.5" x 4.85" (18.29 x 34.39 x 12.32cm)
48-position: 10" x 13.5" x 4.85" (25.4 x 34.39 x 12.32cm)
72-position: 12.8" x 13.5" x 4.85" (32.51 x 34.39 x 12.32cm)
96-position: 15.6" x 13.5" x 4.85" (39.62 x 34.39 x 12.32cm)
Ordering information continues on the next page
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Fiber Wall Boxes
8
www.adc.com • +1-952-938-8080 • 1-800-366-3891
2 FC ultra polish
L FC with zirconia adapter
7 SC ultra polish
N SC with zirconia adapter
J SC angled polish
4ST
®
ultra polish

PST
®
with zirconia adapter
X LX.5
®
8LC
Catalog Number
FDB-
M __ __ __ __ __ __ _0_ __ __ __ 00
1 12 fibers
2 24 fibers
4 48 fibers
7 72 fibers
9 96 fibers
Box Size
112
224
336
448
772
996
A 144
Z 2x12
Y 2x24
X 2x36
W 2x48
Cable Size
Multimode
Singlemode
0 No clamps included

1 1 clamp included
2 2 clamps included
Cable Clamps
A Front lock1, rear lock 2
B Front lock 2, rear lock 1
C Front lock 1, rear quarter turn
D No front lock, rear lock 1
E No front lock, rear lock 2
F No front lock, rear quarter turn
Lock Options
0 No strength member tie-offs included
1 1 strength member tie-off included
Strength Member Tie-offs
Cable Length (in meters)
Adapter/Connector Type
Singlemode
Cable Type
Multimode
C IFC stranded 62.5/125
Y IFC stranded (50/125)
9SC
5ST
®
Y LX.5
®
6LC
OR
A IFC stranded riser-rated
F Plenum stranded
G OSP single armor stranded

H Indoor-outdoor stranded
J OSP dielectric stranded
K IFC stranded Maxi-Strip
M IFC ribbon riser-rated
T OSP dielectric ribbon
L OSP armored ribbon
OR
Fiber Demarcation Box: Preterminated with Multifiber Cable
4/05 • 1323346
Building Entrance Terminals
Building Entrance Terminals
Protection Devices
9
www.adc.com • +1-952-938-8080 • 1-800-366-3891
High-Density 5-Pin Protection
25-pair 5-pin protection
building entrance terminal
100-pair 5-pin protection only
building entrance terminal with
top and bottom stubs
50-pair 5-pin protection
building entrance terminal
Features
• High-density primary protection allows up to eighteen (double-sided) 100-pair units
to be mounted in a standard 7-foot, 19-inch rack
• 26 AWG cable stub is provided for splicing to the incoming 24 AWG cable
• Building entrance terminals available with 5-pin protectors in 25-, 50- and 100-pair units
• 5-pin protectors are rated 300 volts
• Allow “look-both-ways” testing and monitoring without removing wires or protection
• Numerous labeling options allow comprehensive marking

• Variety of mounting hardware options
• UL 497 listed
• 100% compliant with Telcordia TR-NWT-000937
Ordering information is found on page 11