Tài liệu LoopStar® 700 Solutions pdf

TIP SHEET
LoopStar
®
700 Solutions
Boost Your Campus Network
Application
While your current Campus system and existing copper cable facilities provide network flexibility
and can support a wide range of applications, the deployment of ADC’s LoopStar 700 can
enable new IP real-time applications such as Voice over IP (VoIP) and IP Video over your existing
infrastructure. The LoopStar 714 and LoopStar 718 can provide these new IP applications for
minimal cost and operational disruption via their sophisticated Layer 2 Ethernet capabilities. The
LoopStar 714 provides Ethernet over 4x T1 and the LoopStar 718 provides Ethernet over 8x T1
derived from the Campus-RS system.
Customer benefits:
• Supports real-time applications such as IP Video and VoIP
• Reuses existing cooper /Campus infrastructure
• Low cost upgrade
The following diagrams are examples of various cooper network architectures where the LoopStar
700 solutions have been added to existing Campus networks.
• Campus–RS Desktop Modems Point-to-Point
• Campus–RS Star Chassis’
• Campus–RS Star Chassis to Campus RS desktop modems
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Figure 1 represents a simple point-to-point application using ADC Campus-RS desktop modems
and interface cards. Up to eight Campus-RS circuits can be used to connect two LPS-718 or
LPS-714 chassis’ to provide sophisticated Layer 2 Ethernet capabilities for real-time IP applications
(Voice over IP and IP Video) over the local cable plant.
NxT1 Links
NxT1 Links
LPS-714/718 LPS-714/718
Campus-RS Desktops

+ CADSX1 I/F cards.
Campus-RS Desktops
+ CADSX1 I/F cards.
Campus RS Modems Point-to-Point
Local
Cable
Figure 1
1 2 / 0 6 • 1 0 4 0 0 6 A E
LoopStar
®
700 Solutions
LoopStar
®
700 Solutions
Boost Your Campus Network
2
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Figure 2 again depicts a simple point-to-point application, only this time using ADC Campus-RS Star
Chassis and interface cards. Up to eight Campus-RS circuits can be used to connect two LPS-718 or
LPS-714 chassis’ to provide sophisticated Layer 2 Ethernet capabilities over the local cable plant.
In Figure 3 each Star Chassis can support up to 14 Campus-RS circuits. The Star Chassis is interoperable
with the Campus-RS desktop modem. This allows the customer to concentrate multiple locations to a
single hub over the local cable plant. This together with the LPS-714 and LPS-718 allows the customer
to provide sophisticated Layer 2 Ethernet capabilities using the local cable plant.
NxT1 Links NxT1 Links
LPS-714/718 LPS-714/718
Campus-RS Star Chassis
+ CADSX1 I/F cards.
Campus-RS Star Chassis
+ CADSX1 I/F cards.

Campus-RS Star Chassis’
Local
Cable
NxT1 Links
NxT1 Links
NxT1 Links
LPS-714/718
LPS-714/718
LPS-714/718
LPS-714/718
Campus-RS Star Chassis
+ CADSX1 I/F cards.
Campus-RS Desktops
+ CADSX1 I/F cards.
Campus-RS Desktops
+ CADSX1 I/F cards.
Campus-RS Star Chasis to Campus RS Desktop Modems
Local
Cable
Figure 2
Figure 3
1 2 / 0 6 • 1 0 4 0 0 6 A E
LoopStar
®
700 Solutions
LoopStar
®
700 Solutions
Boost Your Campus Network
3

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
In figure 4 the LoopStar-750 can be used to concentrate up to three LoopStar 714 or LoopStar 718
chassis’ directly and place the Ethernet traffic into a higher capacity uplink such as OC-3, OC-12 or
GigE. By adding the M1-3 multiplexer to concentrate up to 28 DS1 circuits into a single DS3 uplink,
the customer can take advantage of the LoopStar 750’s modular design that allows for future growth
and services as the local network evolves.
NxT1 Links
NxT1 Links
NxT1 Links
NxT1 Links
M1-3 multiplexer
chDS3
LPS-714/718
LPS-714/718
LPS-714/718
LPS-714/718
NxT1 Links (up to 28)
Campus-RS Star Chassis
+ CADSX1 I/F cards.
LPS-750
Campus-RS Star Chassis and Desktop Modems
+ CADSX1 I/F cards.
Local
Cable
IP/Optical
Network
In addition to point-to-point, the LoopStar 714 and 718 IP applications can
also be aggregated using the LoopStar 750 as shown in figure 4 below.
Figure 4
Web Site: www.adc.com

From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
104006AE 12/06 Original © 2006 ADC Telecommunications, Inc. All Rights Reserved
TIP SHEET
Description Ordering Number
LPS-714 AC Package, (1 10/100, 1FX, no optics, 4-Ti/Ei) Includes 1 AC power supply
and AC power cord, 19” and 23” rack mount brackets, license for basic software and
documentation.
LPS-714-AC L1
LPS-718 AC Package, (1/10/100BT, 1FX, no optics, 8-T1/E1) Includes 1 AC power
supply and AC power cord, 19” and 23” rack mount brackets, license for basic
software and documentation.
LPS-718-AC L1
Desktop/Remote Site Access Devices
SDSL rate selectable (64 kbps to 4.6 Mbps) Desktop Chasis, 110-240VAC power supply
and US power cord.
CARS-51-3
Star Chasis/Network Management Components
Campus Star-RS Chasis AC US. Includes one universal AC power supply, plus one US
power cord. Second optional redundant/load sharing AC or DC power supply can be
ordered separately.
CACNS700-03-3
Network Interface Modules
DS1, with CSU/DSU CADS1

DSX-1, with CSU/DSU CADSX1
Flexible multiport fractional T1 delivery system. Provides three independent ports. One
DSX-1 port and two serial ports of v.35, RS530 or RS449 mapped to any combination
of 24 DSOs. Cables are not included. One or two cables should be ordered.
CAFLEX
LPS-750 AC Package Includes: 1 AC power supply and AC power cord, blanking
plates, 19" and 23“ rack mount brackets, console cable, License for Basic Software
and documentation.
LPS-750-AC L1
LPS-750-48VDC Package Includes: 1 48VDC power supply, blanking plates, LPS-750-
48DC L1 19" and 23“ rack mount brackets, console cable, License for Basic Software
and documentation.
LPS-750-48DC L1
Interface Cards
LoopStar 5000/2200/2100 Blank Interface Slot Faceplate LPS-7INF-BLNK L1
10/100 BaseT Ethernet-8 port LPS-7INF-FE L1
100BASE FX SM-8 port, fixed optics LPS-7INF-100SM L1
100BaseFX MM-8 port, fixed optics LPS-7INF-100MM L1
Gigabit Ethernet, SFP-1 port, w/o optics LPS-7INF-Gig L1
T1/E1/J1-8 port (with NxT1/E1 Uplink) LPS-7INF-T1E1 L1
DS3, Clear Channel-3 port LPS-7INF-DS3 L1
Dual Gigabit Ethernet Ring, SFP-2 port w/o optics LPS-7INF-2Gig L1
DS3, Channelized, MLPPP only, support 8 bundles of up to 8 T1s LPS-7INF-DS3C L1
OC-3/STM-1, Clear Channel-1 port, w/o optics LPS-7INF-STM1 L1
OC-12/STM-4, Clear Channel-1 port, w/o optics LPS-7INF-STM4 L1
O r d e r i n g I n f o r m a t i o n