Tài liệu FiberGuide® Fiber Management System 4x24-Inch System docx

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Spec Sheet
FiberGuide
®
Fiber Management System
4x24-Inch System
The Industry’s Most Comprehensive Fiber Management System expands to 24-inches.
In response to customer requests, ADC continues to innovate and improve the FiberGuide
®

fiber management system, adding greater capacity and flexibility to the network, and
driving down installation time to ensure a smooth deployment. Fiber densities continue to
increase in today’s networks, creating demand for increased cable management capacity and
protection. ADC’s 4x24-inch FiberGuide is designed to meet this need. ADC is the first and
only manufacturer to deliver this unique solution.
FiberGuide is a fiber management system used to protect and route fiber optic patch
cords, multifiber cable assemblies and intrafacility fiber cable (IFC) to and from fiber splice
enclosures, fiber distribution frames and fiber optic terminal devices. FiberGuide ensures a
two-inch minimum bend radius is maintained throughout the system.
The 4x24-inch system is the standard and ultimate raceway solution to securely route and
protect patch cords over high-density optical distribution frames including ADC’s Next
Generation Frame (NGF) and Next Generation 3 Frame (NG3
®
). Designed for maximum
capacity, this robust system provides the same support and flexibility as the traditional
4x12-inch system while doubling capacity. The 4x24-inch FiberGuide system is a complete
set of products designed and manufactured to ensure total off-frame protection and
ease of use. Basic components include horizontal straight sections, horizontal and vertical
elbows, downspouts, junctions, Express Exits
™
and numerous support hardware fittings and

flex tube kits. Tool-less SnapFit
™
junctions significantly reduce installation time.
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
2
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Speed of Installation
The 4x24-inch FiberGuide
®
system features a
variety of products that make installation simple
and efficient. Express Exit drops and tool-less
products like the Snap-Fit junction save valuable
time for installers. ADC’s support bracket kits
utilize the quick knob, allowing support bracket
kits to be attached with ease. Additionally,
multiple support bracket mounting locations aide
in speedy installations.
Speed of Deployment
The 4x24-inch system is compatible with the 2-inch
and 4-inch Express Exit systems. This enables new
drops to be added or removed quickly and easily.
A drop may be added into a fully loaded raceway
in seconds — without cutting.
Raceway Flexibility
The 4x24-inch system is an extension of ADC’s
broad product offering. The system now includes
2x2-inch, 2x6-inch, 4x4-inch, 4x6-inch, 4x12-inch
and 4x24-inch raceways, to suit any network

application. Variable support bracket kits provide
the flexibility needed to accommodate various
mounting requirements.
Fiber Protection
ADC’s broadband expertise translates into
maximum protection for your network. Two-inch
minimum bend radius is maintained throughout
the system regardless of the raceway size.
Strength and Durability
100% raceway reliability — stands up to any
challenge.
FiberGuide
®
Fiber Management System
Features and Benefits
Existing 5/8" Threaded Rod Trapeze Kit
4x24 Horizontal Cross with Dual 12" Exits
12" Cut in T for 4x24-inch system
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
3
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
4x24 Island T
The 4x24 Island T with 12-inch exit is designed to be used over the NGF, NG3
®
or any high-density fiber
frame. The 4x24 Island T, a horizontal T with spool and factory-installed trumpet flare, channels fiber
directly into the vertical cableways below.
FiberGuide
®

Fiber Management System
4x24-Inch System Application
4x24 Island T
(shown with support brackets over an NGF frame)
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
4
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
4x24 Snap-Fit Junction
FGS-MFAW-H
4x24 Six-foot Straight Section
FGS-MSHS-H
45° Horizontal Elbow
FGS-MH4E-H
4x24 Horizontal T with Single
12" Exit
FGS-MHRT-H/F
4x24 Horizontal Cross
FGS-MHXP-H
4x24 Horizontal Cross with
Dual 12" Exits
FGS-MHXP-F/H
Existing 5/8" Threaded Rod
Trapeze Kit
FGS-HETP-H-5/8
Variable Fitting Support Locater
Horiz. Cross with Dual 12" Exit*
FGS-MHXP-F/H-VS
Variable Fitting Support
Locater Horiz. Cross*

FGS-MHXP-H-VS
4x24 Trumpet Flare
FGS-MTRM-H
45° Down Elbow
FGS-MD4E-H
45° Up Elbow
FGS-MU4E-H
12" Cut in T
FGS-MHIS-B/H
Variable Fitting Support Locater
Horiz. T with Single 12" Exit*
FGS-MHRT-H/F-VS
Variable Fitting Support
Locater Horiz. Elbow*
FGS-MH4E-H-VS
4x24 End Cap
FGS-HMEC-H
4x24 Island T with Single
12" Exit
FGS-ISLAND-H/F
4x24 to 4x12 Adapter
FGS-MDSA-HF
FiberGuide
®
Fiber Management System
4x24-Inch System Components
* kits do not include trapeze or cantilever support brackets.
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
5

w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
Recommended capacity takes into consideration random jumper placement into the FiberGuide
®

System. Maximum density refers to the maximum number of jumpers in a given cross-section of a
FiberGuide installation. The TracerLight
®
Connector Identification System is ADC's newest patch cord
solution. It features slightly different dimensions than standard patch cords.
Recommended
Patch Cord
Density
1.7 mm
Patch Cords
2.0 mm
Patch Cords
3.0 mm
Patch Cords
120 90 40
Trough
Pileup
4x24-Inch FiberGuide System
1.7 mm Patch Cords
4x24-Inch FiberGuide System
2.0 mm Patch Cords
4x24-Inch FiberGuide System
3.0 mm Patch Cords
2-inch 5760 4320 1920
3-inch 8640 6480 2880
4-inch 11520 8640 3840

Trough
Pileup
4x24-Inch FiberGuide System
2-inch 3120
3-inch 4680
4-inch 6240
ADC Recommended Patch Cord Density (per square inch)
Maximum Patch Cord Capacity using 4x24-Inch FiberGuide System
Trough
Pileup
4x24-Inch FiberGuide System
1.7 mm Patch Cords
4x24-Inch FiberGuide System
2.0 mm Patch Cords
4x24-Inch FiberGuide System
3.0 mm Patch Cords
2-inch 6816 4869 2112
3-inch 10224 7344 3168
4-inch 13632 9792 4224
TracerLight Patch Cord Capacity using 4x24-Inch FiberGuide System
(65 patch cords per square inch)
FiberGuide
®
Fiber Management System
Recommended Patch Cord Capacities
ADC Recommended Patch Cord Capacity using 4x24-Inch FiberGuide System
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
6
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1

114.3 mm
(4.5")
645 mm
(25.4")
4x24 End Cap
FGS-HMEC-H
4.1 mm
(.16")
419 mm
(16.5")
795 mm
(31.3")
470 mm
(18.5")
160 mm
(6.3")
(8")
203.2 mm
4x24 Island T with Single 12" Exit
FGS-ISLAND-H/F
4x24 x 4x12 Adapter
FGS-MDSA-HF
108 mm
(4.25")
697.2 mm
(27.45")
127.3 mm
(5.01")
143.5 mm
(5.65")

(24")
609.6 mm
4x24 Snap-Fit Junction
FGS-MFAW-H
581.2 mm
(22.88")
652 mm
(25.67")
701 mm
(27.6")
4x24 45° Horizontal Elbow
FGS-MH4E-H
(4.72")
119.9 mm
(24")
609.6 mm
533.1 mm
(20.99")
652 mm
(25.67")
347.2 mm
(13.67")
745 mm
(29.33")
(24")
609.6 mm
(12")
304.8 mm
(4.72")
119.9 mm

4x24 Horizontal T with Single 12" Exit
MGS-MHRT-H/F
533.1 mm
(20.99")
347.2 mm
(13.67")
837.9 mm
(32.99")
652 mm
(25.67")
(12")
304.8 mm
(4.72")
119.9 mm
(24")
609.6 mm
4x24 Horizontal Cross with Dual 12" Exits
FGS-MHXP-F/H
(4.72")
119.9 mm
(24")
609.6 mm
837.9 mm
(32.99")
652.3 mm
(25.68")
837.9 mm
(32.99")
4x24 Horizontal Cross
FGS-MHXP-H

584.2 mm
(23")
576.6 mm
(22.7")
101.6 mm
(4")
88.9 mm
(3.5")
94 mm
(3.7")
4 x 24 Straight Section
FGS-MSHS-H
4x24 Trumpet Kit
FGS-MTRM-H
736.3 mm
(28.99")
160 mm
(6.3")
77.7 mm
(3.06")
609.3 mm
(23.99")
114 mm
(4.49")
134.3 mm
(5.29")
4x24 45° Up Elbow
FGS-MU4E-H
(24")
609.6 mm

646.9 mm
(25.47")
FiberGuide
®
Fiber Management System
4x24-Inch System Component Specifications
4 / 0 7 • 1 0 3 7 3 3 A E
FiberGuide Fiber Management System
7
w w w . a d c . c o m • + 1 - 9 5 2 - 9 3 8 - 8 0 8 0 • 1 - 8 0 0 - 3 6 6 - 3 8 9 1
12.7 mm
(.5")
736.6 mm
(29")
844.6 mm
(33.25")
50.8 mm
(2")
Split Nut
Bracket
Clip
Existing Threaded Rod Trapeze Bracket
Threaded Rod Ref
Quick Knob
Existing 5/8” Threaded Rod Trapeze Bracket Kit
FGS- HETP-H-5/8
793.8 mm
(31.25")
736.6 mm
(29")

50.8 mm
(2")
New 5/8” Threaded Rod Trapeze Bracket Kit
FGS-HNTP-H-5/8
(24")
609.6 mm
4x24 45° Down Elbow
FGS-MD4E-H
177.8 mm
(7")
116.6 mm
(4.59")
SIDE
Variable Support Bracket - Horiz. Elbow
FGS-MH4E-H-VS
304.8 mm
(12")
345.2 mm
(13.59")
329.9 mm
(12.99")
128 mm
(5.03")
101.6 mm
(4")
4x4 Cut-in T for 4x24 FiberGuide
FGS-MHIS-A/H
4" Cut-in T
Adapter Bracket
152.4 mm

(6")
355.6 mm
(14")
381 mm
(15")
396 mm
(15.59")
128 mm
(5.03")
4x6 Cut-in T for 4x24 FiberGuide
FGS-MHIS-B/H
6" Cut-in T Adapter Bracket
508 mm
(20")
304.8 mm
(12")
533.4 mm
(21")
548.4 mm
(21.59")
128 mm
(5.03")
4x12 Cut-in T for 4x24 FiberGuide
FGS-MHIS-F/H
12" Cut-in T
Adapter Bracket
Variable Support Bracket - Horiz. T
FGS-MHRT-H/F-VS
Variable Support Bracket - Horiz. Cross
FGS-MHXP-F/H-VS

Variable Support Bracket - Horiz. Cross
FGS-MHXP-H-VS
FiberGuide
®
Fiber Management System
4x24-Inch System Component Specifications
Variable Fitting Support Locator
- Horiz. Elbow
FGS-MH4E-H-VS
Variable Fitting Support Locator
- Horiz. T
FGS-MHRT-H/F-VS
Variable Fitting Support Locator
- Horiz. Cross
FGS-MHXP-H-VS
Variable Fitting Support Locator
- Horiz. Cross
FGS-MHXP-F/H-VS
Web Site: www.adc.com
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products orfeatures
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
103733AE 4/07 Original © 2007 ADC Telecommunications, Inc. All Rights Reserved
Spec Sheet
4 x 24-Inch System Section and Junction

Yellow System
Catalog Number
Orange System
Catalog Number
4x24 Six-foot Straight Section FGS-MSHS-H FGSO-MSHS-H
4x24 Snap-Fit Junction FGS-MFAW-H FGSO-MFAW-H
O r d e r i n g I n f o r m a t i o n
FiberGuide
®
Fiber Management System
Yellow and Orange System
4x24-Inch System Support Kits for both Yellow and Orange Systems Catalog Number
Variable Fitting Support Locater Kit for 4x24 Horizontal Elbow* FGS-MH4E-H-VS
Variable Fitting Support Locater Kit for 4x24 Horizontal T with Single 12" Exit* FGS-MHRT-H/F-VS
Variable Fitting Support Locater Kit for 4x24 Horizontal Cross* FGS-MHXP-H-VS
Variable Fitting Support Locater Kit for 4x24 Horizontal Cross with Dual 12"
Exits*
FGS-MHXP-F/H-VS
Existing 5/8" Threaded Rod Trapeze Bracket Kit FGS-HETP-H-5/8
New 5/8" Threaded Rod Trapeze Bracket Kit FGS-HNTP-H-5/8
O r d e r i n g I n f o r m a t i o n
4x24-Inch System Fittings
Yellow System
Catalog Number
Orange System
Catalog Number
4x24 45° Horizontal Elbow FGS-MH4E-H FGSO-MH4E-H
4x24 Horizontal T with Single 12" Exit FGS-MHRT-H/F FGSO-MHRT-H/F
4x24 Horizontal Cross FGS-MHXP-H FGSO-MHXP-H
4x24 Horizontal Cross with Dual 12" Exits FGS-MHXP-F/H FGSO-MHXP-F/H

4x24 End Cap FGS-HMEC-H FGS-HMEC-H
4x24 Island T with Single 12" Exit FGS-ISLAND-H/F FGSO-ISLAND-H/F
4x24 to 4x12 Adapter FGS-MDSA-HF FGS-MDSA-HF
4x24 Trumpet Flare FGS-MTRM-H FGS-MTRM-H
4x24 45° Up Elbow FGS-MU4E-H FGS-MU4E-H
4x24 45° Down Elbow FGS-MD4E-H FGS-MD4E-H
12" Cut-in T for 4x24 FGS-MHIS-F/H FGSO-MHIS-F/H
O r d e r i n g I n f o r m a t i o n
* kits do not include trapeze or cantilever support brackets.